DEFSTAN 80-209/3(2005) : 2005
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PAINT FINISHING, POLYURETHANE, MULTI-PACK, GLOSS, CHEMICAL AGENT RESISTANT, NON AIRCRAFT USE, LOW VOC
Hardcopy , PDF
12-01-2021
English
01-01-2005
Important note : Users cannot be edited or removed once added to your Multi user PDF.
0 Introduction
1 Scope
2 Warning
3 Normative References
4 Description
5 Information to be Supplied by the Purchaser
6 Keeping Qualities
7 Quality Assurance
8 Product Conformity Certification (PCC)
9 Containers and Marking of Containers
10 Composition
11 Testing
11.1 Test conditions
11.2 Condition
12 Test Requirements
Annex A Preparation of Test Panels
Annex B Determination of Pot Life
Annex C Determination of Resistance to OM-58
Annex D Determination of Resistance to Liquid Fuel
Annex E Determination of Resistance to Water
Specifies requirements for a multi-pack, cold-curing, polyurethane, chemical agent resistant, gloss, finishing paint, with a low Volatile Organic Compounds (VOC) content and suitable, when used with the appropriate primer, for the protection of Service vehicles and equipment.
| DevelopmentNote |
Supersedes DEFSTAN 80-209/2(2001) (12/2004)
|
| DocumentType |
Standard
|
| Pages |
18
|
| PublisherName |
UK Ministry of Defence Standards
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| DEFSTAN 03-032(PT1)/5(2017) : 2017 | PRETREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 1: GENERAL REQUIREMENTS |
| DEFSTAN 81-41(PT6)/7(2010) : 2010 | PACKAGING OF DEFENCE MATERIEL - PART 6: PACKAGE MARKING |
| DEFSTAN 80-168/3(2007) : 2007 | COMPOUND, PROTECTIVE, FOR VEHICLE UNDERBODIES, WATER-BASED |
| DEFSTAN 80-65/3(2009) : 2009 | PAINT, FINISHING, FOR THE INTERIOR OF JERRICANS |
| DEFSTAN 80-216/2(2012) : 2012 | PAINT, FILLER, EPOXY, SPRAYING, MULTI-PACK |
| DEFSTAN 03-32(PT1)/4(2005) : 2005 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEERING EQUIPMENT AND COMPONENTS - PART 1: GENERAL REQUIREMENTS |
| DEFSTAN 03-32(PT5)/4(2005) : 2005 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEERING EQUIPMENT AND COMPONENTS - PART 5: SYSTEMS FOR NON-FERROUS METALS, EXCLUDING ALUMINIUM ALLOY FOR ARMOUR AND STRUCTURAL APPLICATIONS |
| DEFSTAN 80-168/4(2012) : 2012 | COMPOUND, PROTECTIVE, FOR VEHICLE UNDERBODIES, WATER-BASED |
| DEFSTAN 03-32(PT4)/4(2005) : 2005 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEERING EQUIPMENT AND COMPONENTS - PART 4: SYSTEMS FOR FERROUS METAL, EXCLUDING ARMOUR |
| DEFSTAN 03-32(PT6)/4(2005) : 2005 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEERING EQUIPMENT AND COMPONENTS - PART 6: SYSTEMS FOR SPECIALISED VEHICLES, COMPONENTS AND SUBSTRATES INCLUDING DISTINCTIVE COLOURS |
| DEFSTAN 03-32(PT3)/4(2005) : 2005 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEERING EQUIPMENT AND COMPONENTS - PART 3: SYSTEMS FOR ALUMINIUM ALLOY FOR ARMOUR AND STRUCTURAL APPLICATIONS |
| DEFSTAN 81-41(PT6)/8(2013) : 2013 | PACKAGING OF DEFENCE MATERIEL - PART 6: PACKAGE MARKING |
| DEFSTAN 80-054/6(2017) : 2017 | PAINT, FINISHING, GENERAL SERVICE, FUEL RESISTANT, GLOSS - TYPE: BRUSHING OR SPRAYING |
| DEFSTAN 80-168/5(2017) : 2017 | COMPOUND, PROTECTIVE, FOR VEHICLE UNDERBODIES, WATER-BASED |
| DEFSTAN 80-54/5(2010) : 2010 | PAINT, FINISHING, GENERAL SERVICE, FUEL RESISTANT, GLOSS - TYPE: BRUSHING OR SPRAYING |
| DEFSTAN 81-86/3(2007) : 2007 | METAL FITTINGS FOR WOODEN CONTAINERS |
| DEFSTAN 03-32(PT2)/4(2005) : 2005 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEERING EQUIPMENT AND COMPONENTS - PART 2: SYSTEMS FOR FERROUS ARMOUR |
| DEFSTAN 80-54/4(2005) : 2005 | PAINT, FINISHING, GENERAL SERVICE, FUEL RESISTANT, GLOSS - TYPE: BRUSHING OR SPRAYING |
| DEFSTAN 81-086/4(2017) : 2017 | FITTINGS METAL AND HANDLES FOR CONTAINERS |
| DEFSTAN 03-032(PT6)/5(2017) : 2017 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 6: SYSTEMS FOR SPECIALISED VEHICLES, COMPONENTS AND SUBSTRATES INCLUDING DISTINCTIVE COLOURS |
| DEFSTAN 80-065/4(2017) : 2017 | PAINT, FINISHING, FOR THE INTERIOR OF JERRICANS |
| DEFSTAN 80-14/2(2006) : 2006 | PAINT REMOVER, DICHLOROMETHANE, WATER RINSABLE NON AEROSPACE USE TYPE: BRUSHING |
| DEFSTAN 80-206/3(2009) : 2009 | PAINT, PRIMING, ZINC PHOSPHATE, NON-AIRCRAFT USE, LOW VOC SINGLE OR MULTI-PACK |
| DEFSTAN 80-207/3(2009) : 2009 | PAINT, PRIMING, ZINC CHROMATE, NON-AIRCRAFT USE, LOW VOC SINGLE OR MULTI-PACK |
| DEFSTAN 03-032(PT4)/5(2017) : 2017 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 4: SYSTEMS FOR FERROUS METAL, EXCLUDING ARMOUR |
| DEFSTAN 03-032(PT5)/5(2017) : 2017 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 5: SYSTEMS FOR NON-FERROUS METALS EXCLUDING ALUMINIUM ALLOY FOR ARMOUR AND STRUCTURAL APPLICATIONS |
| DEFSTAN 03-032(PT3)/5(2017) : 2017 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 3: SYSTEMS FOR ALUMINIUM ALLOY FOR ARMOUR AND STRUCTURAL APPLICATIONS |
| DEFSTAN 03-032(PT2)/5(2017) : 2017 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 2: SYSTEMS FOR FERROUS ARMOUR |
| DEFSTAN 81-41(PT6)/9(2015) : 2015 | PACKAGING OF DEFENCE MATERIEL - PART 6: PACKAGE MARKING |
| BS 381C:1996 | Specification for colours for identification, coding and special purposes |
| BS EN ISO 1514:2004 | Paints and varnishes. Standard panels for testing |
| DEFSTAN 80-207/2(2003) : 2003 | PAINT, PRIMING, ZINC CHROMATE, NON AIRCRAFT USE, LOW VOC SINGLE OR MULTI-PACK |
| BS EN ISO 1518:2001 | Paints and varnishes. Scratch test |
| BS EN ISO 1513:1995 | Paints and varnishes. Examination and preparation of samples for testing |
| BS EN ISO 3696:1995 | Water for analytical laboratory use. Specification and test methods |
| BS EN 23270:1991 | Specification for temperatures and humidities for conditioning and testing paints, varnishes and their raw materials |
| STANAG 4360 : 2012 | SPECIFICATION FOR PAINT SYSTEMS, RESISTANT TO CHEMICAL AGENTS AND DECONTAMINANTS, FOR THE PROTECTION OF LAND MILITARY EQUIPMENT |
| BS EN ISO 2431:2011 | Paints and varnishes. Determination of flow time by use of flow cups |
| BS EN ISO 2812-1:2007 | Paints and varnishes. Determination of resistance to liquids Immersion in liquids other than water |
| BS EN 45014:1998 | General criteria for supplier\'s declaration of conformity |
| BS EN 29117:1992 | Methods of test for paints. Tests associated with paint film formation Paints and varnishes. Determination of through-dry state and through-dry time. Method of test |
| DEFSTAN 80-161/2(2002) : 2002 | PAINT, FINISHING, SPRAYING, EPOXY, MULTI-PACK |
| DEFSTAN 80-206/2(2003) : 2003 | PAINT, PRIMING, ZINC PHOSPHATE, NON AIRCRAFT USE, LOW VOC SINGLE OR MULTI-PACK |
| DEFSTAN 00-72/1(2001) : 2001 | CHEMICAL AGENT RESISTANCE REQUIREMENTS FOR COATINGS APPLIED TO MILITARY EQUIPMENT |
| BS EN ISO 2409:2013 | Paints and varnishes. Cross-cut test |
| DEFSTAN 91-42/2(1996) : 1996 | LUBRICATING OIL, PETROLEUM: COMPRESSOR, LIGHT JOINT SERVICE DESIGNATION: OM-58 LUBRICATING OIL, PETROLEUM: COMPRESSOR, MEDIUM JOINT SERVICE DESIGNATION: OM-160 |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.