DEFSTAN 80-41/3(2000) : 2000

Withdrawn

Withdrawn A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

PAINT FINISHING, DEFENCE EQUIPMENT MATT TYPE: BRUSHING SPRAYING

Available format(s):

Withdrawn date: 19-04-2012

Language(s):

Published date: 12-01-2013

Publisher: UK Ministry of Defence Standards

Table of Contents - (Show below) - (Hide below)

Section One: General
1. Scope
2. WARNING
3. Related Documents
4. Description
5. Information to be Supplied by the Purchaser
6. Keeping Quality
7. Quality Assurance
8. Containers and Marking of Containers
Section Two: Material
9. Composition
10. Testing
Table A Test Requirements
Annex A Preparation of Painted Test Panels
Annex B Determination of Fitness for Recoat
Annex C Determination of Resistance to Development of Sheen
Annex D Determination of Resistance to Mineral Oil
Annex E Determination of Resistance to Liquid Fuel
Annex F Determination of Resistance to Artificial Weathering

Abstract - (Show below) - (Hide below)

Gives requirements for an air drying, near matt finishing paint which is suitable for both interior and exterior use. It can be used with an appropriate priming paint and undercoat on prepared and/or pre-treated ferrous and non ferrous substrates. Where that coating is not needed to be VOC compliant and/or Chemical Agent Resistant as defined in STANAG 4360, it is suitable for use on MOD vehicles and equipment.

General Product Information - (Show below) - (Hide below)

Development Note	Supersedes DEFSTAN 80-41/2(1991), DEFSTAN 80-153/1(1991), DEFSTAN 80-135/2(1994) & DEFSTAN 80-41/1(1982) (10/2001) This standard is obsolescent because it is no longer required for the procurement of new equipment but is retained for maintenance purposes in support of existing in-service equipment. (10/2003) Supersedes TS 10150A. (11/2005)
Document Type	Standard
ISBN
Pages
Published
Publisher	UK Ministry of Defence Standards
Status	Withdrawn
Supersedes	TS 10150A : 1980 DEFSTAN 80-153/1(1991) : 1991 DEFSTAN 80-41/1(1982) : 1982 DEFSTAN 80-135/2(1994) : 1994 DEFSTAN 80-41/2(1991) : 1991

Standards Referenced By This Book - (Show below) - (Hide below)

DEFSTAN 03-32(PT3)/3(2002) : 2002	PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 3: SYSTEMS FOR ALUMINIUM ALLOY FOR ARMOUR AND STRUCTURAL APPLICATIONS
DEFSTAN 03-32(PT1)/4(2005) : 2005	PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEERING EQUIPMENT AND COMPONENTS - PART 1: GENERAL REQUIREMENTS
DEFSTAN 03-32(PT1)/3(2002) : 2002	PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 1: GENERAL REQUIREMENTS
DEFSTAN 68-118/3(2002) : 2002	DE-ICING/ANTI-ICING FLUID FOR RUNWAYS
DEFSTAN 80-128/2(1998) : 1998	PAINT, FINISHING, TEMPORARY CAMOUFLAGE, ALKALI REMOVABLE
DEFSTAN 03-32(PT5)/3(2002) : 2002	PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 5: SYSTEMS FOR NON-FERROUS METALS EXCLUDING ALUMINIUM ALLOY FOR ARMOUR AND STRUCTURAL APPLICATIONS
DEFSTAN 03-4/4(1998) : 1998	THE PRE-TREATMENT AND PROTECTION OF STEEL ITEMS OF SPECIFIED MAXIMUM TENSILE STRENGTH EXCEEDING 1450 MPA
DEFSTAN 03-32(PT4)/3(2002) : 2002	PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 4: SYSTEMS FOR FERROUS METAL, EXCLUDING ARMOUR
DEFSTAN 03-32(PT2)/3(2002) : 2002	PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 2: SYSTEMS FOR FERROUS ARMOUR
DEFSTAN 68-233/1(1994) : 1994	BASE PAPER, ADHESIVE COATED POLYETHYLENE LAMINATE FOR DETECTOR PAPER, NO 2, MK 2
DEFSTAN 68-233/2(2009) : 2009	BASE PAPER, ADHESIVE COATED POLYETHYLENE LAMINATE FOR DETECTOR PAPER, NO.2 MK 2

Standards Referencing This Book - (Show below) - (Hide below)

BS EN ISO 1514:2004	Paints and varnishes. Standard panels for testing
BS EN ISO 1513:1995	Paints and varnishes. Examination and preparation of samples for testing
BS EN ISO 1517:1995	Paints and varnishes. Surface-drying test. Ballotini method
DEFSTAN 80-126/1(1989) : 1989	PAINT, PRIMING, ZINC PHOSPHATE, AIR-DRYING - TYPES: BRUSHING, SPRAYING, DIPPING
BS EN 23270:1991	Specification for temperatures and humidities for conditioning and testing paints, varnishes and their raw materials
DEFSTAN 00-23/2(1998) : 1998
STANAG 4360 : 2012	SPECIFICATION FOR PAINT SYSTEMS, RESISTANT TO CHEMICAL AGENTS AND DECONTAMINANTS, FOR THE PROTECTION OF LAND MILITARY EQUIPMENT
DEFSTAN 83-39/3(1985) : 1985	CLOTHS, 3 X 1 TWILL, COTTON
DEFSTAN 80-208/1(1997) : INTERIM	PAINT, FINISHING, POLYURETHANE, MULTI-PACK, MATT, IRR, NON AIRCRAFT USE, LOW VOC
BS EN ISO 2812-1:2007	Paints and varnishes. Determination of resistance to liquids Immersion in liquids other than water
BS EN 29117:1992	Methods of test for paints. Tests associated with paint film formation Paints and varnishes. Determination of through-dry state and through-dry time. Method of test
DEFSTAN 91-42/2(1996) : 1996	LUBRICATING OIL, PETROLEUM: COMPRESSOR, LIGHT JOINT SERVICE DESIGNATION: OM-58 LUBRICATING OIL, PETROLEUM: COMPRESSOR, MEDIUM JOINT SERVICE DESIGNATION: OM-160
BS EN ISO 1519:2011	Paints and varnishes. Bend test (cylindrical mandrel)
DEFSTAN 80-114/1(1985) : 1985	PAINT, PRIMING, DEFENCE EQUIPMENT AIR DRYING - TYPES: BRUSHING, SPRAYING DIPPING

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart