DIN 1045-3:2012-03
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Concrete, reinforced and prestressed concrete structures - Part 3: Execution of structures - Application rules for DIN EN 13670
Hardcopy , PDF
01-08-2023
01-03-2012
Foreword
1 Scope
2 Normative references
3 Concepts
4 Documentation and site management
4.1 Project specification
4.2 Documentation
4.2.1 Scope
4.2.2 Drawings
4.2.3 Design analysis
4.2.4 Specification of works
4.3 Records to be kept during construction work
4.4 Site manager
5 Falsework, formwork and embedded parts
5.1 General requirements
5.2 Falsework
5.3 Formwork
5.4 Release agents
5.5 Embedded parts
5.6 Striking of formwork and falsework
5.6.1 Striking times
5.6.2 Props
6 Reinforcement
6.1 General requirements
6.2 Bending, transport and storage of reinforcement
6.3 Welding of reinforcing steel
6.4 Laying of reinforcement
7 Prestressing
7.1 General
7.2 Transportation and storage
7.3 Making of tendons
7.4 Placing of tendons
7.4.1 General
7.4.2 Pre-tensioned members
7.4.3 Post-tensioned members
7.4.4 Unbonded internal and external tendons
7.5 Tensioning of tendons
7.5.1 General
7.5.2 Pre-tensioned members
7.5.3 Post-tensioned or unbonded members
7.6 Corrosion protection
7.6.1 General
7.6.2 Pre-tensioned members
7.6.3 Post-tensioned members
7.6.4 Internal or external unbonded tendons
7.6.5 Injection of neat cement grout
7.6.6 Injection of corrosion protection material
8 Concreting
8.1 General
8.2 Transport of concrete
8.2.1 Transport of concrete to site
8.2.2 Transport of concrete on site
8.3 Temperature of concrete
8.4 Preparatory work
8.5 Placing and compaction
8.6 Surface treatment
8.7 Curing and protection
8.7.1 General
8.7.2 Curing methods
8.7.3 Start of curing process
8.7.4 Curing time
8.7.5 Curing compounds
9 Building with precast concrete elements
10 Tolerances
10.1 General
10.2 Tolerances for building components and elements
10.3 Tolerances for concrete cover
10.4 Tolerances for structural safety
11 Internal control
11.1 General
11.2 Control of falsework and formwork
11.3 Control of reinforcement work
11.4 Control of prestressing work
11.5 Control of concreting
Annex A (normative) - Testing the main properties of fresh
and hardened concrete
A.1 General
A.2 Testing the compressive strength of designed ready-mixed
concrete
Annex B (normative) - Internal control when placing concrete
of inspection classes 2 and 3 by the contractor
B.1 Permanent testing laboratory
B.2 Records
B.3 Identification of site
Annex C (normative) - Inspection of concrete of inspection
classes 2 and 3 by an accredited inspection body
C.1 General
C.2 Type and frequency of inspection
C.3 Scope of inspection
C.4 Sampling
C.5 Inspection report
Annex D (normative) - Inspection of grouting by an accredited
inspection body
Bibliography
This standard is included in DIN Handbook 78, 93 and 465.
DevelopmentNote |
Supersedes DIN 1045 (07/2001) Supersedes DIN 1047 (02/2003) DIN 1045-3:2005-01 (AMD 1) supersedes DIN 1045-3:2002-06 (COR 1). (01/2005) Applies in conjunction with DIN EN 13670 issue 03-2011. (03/2012)
|
DocumentType |
Standard
|
Pages |
42
|
ProductNote |
NEW CHILD COR 1 2013 IS NOW ADDED
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
DIN V 1201:2004-08 | CONCRETE PIPES AND FITTINGS, UNREINFORCED, STEEL FIBRE AND REINFORCED FOR DRAINS AND SEWERS - TYPE 1 AND TYPE 2 - REQUIREMENTS, TEST METHODS AND EVALUATION OF CONFORMITY |
DIN 4034-2:2013-05 | PREFABRICATED CONCRETE MANHOLES, UNREINFORCED, STEEL FIBRE AND REINFORCED - PART 2: MANHOLES FOR WELL CONSTRUCTION AND DRAIN CONSTRUCTION |
DIN HDBK 93 : 10ED 2016 | STAHLBAUARBEITEN VOB/STLB-BAU - VOB TEIL C: ATV DIN 18299, ATV DIN 18335 |
DIN 18316:2016-09 | GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - ROAD CONSTRUCTION - SURFACINGS WITH HYDRAULIC BINDERS |
DIN 19702:2013-02 | SOLID STRUCTURES IN HYDRAULIC ENGINEERING - BEARING CAPACITY, SERVICEABILITY AND DURABILITY |
DIN 18335:2016-09 | GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - STEEL CONSTRUCTION WORKS |
DIN HDBK 465 : 2ED 2013 | VERKEHRSWEGEBAUARBEITEN - ANWENDUNGSREGELN, VORWIEGEND MINERALISCHE BAUTEILE, ANDERE BAUSTOFFE UND BAUTEILE |
DIN 1045-1:2008-08 | CONCRETE, REINFORCED AND PRESTRESSED CONCRETE STRUCTURES - PART 1: DESIGN AND CONSTRUCTION |
DIN 18349:2016-09 | GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - REPAIR WORK ON CONCRETE STRUCTURES |
DIN 18314:2016-09 | GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - SPRAYED CONCRETE WORKS |
DIN 4123:2013-04 | EXCAVATIONS, FOUNDATIONS AND UNDERPINNINGS IN THE AREA OF EXISTING BUILDINGS |
DIN 1045-4:2012-02 | Concrete, reinforced and prestressed concrete structures - Part 4: Additional rules for the production and the conformity of prefabricated elements |
DIN 4093:2015-11 | Design of strengthened soil - Set up by means of jet grouting, deep mixing or grouting |
DIN 1045-2:2008-08 | Concrete, reinforced and prestressed concrete structures - Part 2: Concrete - Specification, performance, production and conformity - Application rules for DIN EN 206-1 |
DIN V 4034-1:2004-08 | PREFABRICATED CONCRETE MANHOLES, UNREINFORCED, STEEL FIBRE AND REINFORCED FOR DRAINS AND SEWERS - TYPE 1 AND TYPE 2 - PART 1: REQUIREMENTS, TEST METHODS AND EVALUATION OF CONFORMITY |
DIN 19643-1:2012-11 | Treatment of water of swimming pools and baths - Part 1: General requirements |
DIN 2880:1999-01 | Application of cement mortar lining for cast iron pipes, steel pipes and fittings |
DIN 18331:2016-09 | GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - CONCRETE WORKS |
DIN 4109-32:2016-07 | SOUND INSULATION IN BUILDINGS - PART 32: DATA FOR VERIFICATION OF SOUND INSULATION (COMPONENT CATALOGUE) - SOLID CONSTRUCTION |
DIN EN 14487-1:2006-03 | Sprayed concrete - Part 1: Definitions, specifications and conformity |
DIN 18216:1986-12 | Formwork ties; requirements, testing, use |
DIN 18202:2013-04 | TOLERANCES IN BUILDING CONSTRUCTION - BUILDINGS |
DIN EN 12350-4:2009-08 | TESTING FRESH CONCRETE - PART 4: DEGREE OF COMPACTABILITY |
DIN EN 12350-7:2009-08 | TESTING FRESH CONCRETE - PART 7: AIR CONTENT - PRESSURE METHODS |
DIN EN 12350-2:2009-08 | TESTING FRESH CONCRETE - PART 2: SLUMP-TEST |
DIN EN ISO 17660-1:2006-12 | WELDING - WELDING OF REINFORCING STEEL - PART 1: LOAD-BEARING WELDED JOINTS |
DIN EN 12350-3:2009-08 | TESTING FRESH CONCRETE - PART 3: VEBE TEST |
DIN EN 12812:2008-12 | FALSEWORK - PERFORMANCE REQUIREMENTS AND GENERAL DESIGN |
DIN EN ISO 17660-2:2006-12 | Welding - Welding of reinforcing steel - Part 2: Non load-bearing welded joints (ISO 17660-2:2006) |
DIN EN 12390-7:2009-07 | TESTING HARDENED CONCRETE - PART 7: DENSITY OF HARDENED CONCRETE |
ASTM C 173/C173M : 2016 : REDLINE | Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method |
DIN EN 12350-1:2009-08 | TESTING FRESH CONCRETE - PART 1: SAMPLING |
DIN EN 12350-5:2009-08 | TESTING FRESH CONCRETE - PART 5: FLOW TABLE TEST |
DIN EN 12813:2004-09 | Temporary works equipment - Loadbearing towers of prefabricated components - Particular methods of structural design |
DIN EN 12350-6:2011-03 | TESTING FRESH CONCRETE - PART 6: DENSITY |
DIN EN 1065:1998-12 | Adjustable telescopic steel props - Product specifications, design and assessment by calculation and tests |
DIN 1045-2:2008-08 | Concrete, reinforced and prestressed concrete structures - Part 2: Concrete - Specification, performance, production and conformity - Application rules for DIN EN 206-1 |
DIN 18218:2010-01 | Pressure of fresh concrete on vertical formwork |
DIN 18203-1:1997-04 | TOLERANCES IN BUILDING CONSTRUCTION - PART 1: PREFABRICATED COMPONENTS MADE OF CONCRETE, REINFORCED CONCRETE AND PRESTRESSED CONCRETE |
DIN EN 1992-1-1:2011-01 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
DIN EN 14487-2:2007-01 | Sprayed concrete - Part 2: Execution |
DIN 18551:2014-08 | SPRAYED CONCRETE - NATIONAL APPLICATION RULES FOR SERIES DIN EN 14487 AND RULES FOR DESIGN OF SPRAYED CONCRETE CONSTRUCTIONS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.