DIN 15063:1977-12
Current
The latest, up-to-date edition.
LIFTING APPLIANCES; SHEAVES, TECHNICAL CONDITIONS
Hardcopy , PDF
German
01-01-1977
1 Geltungsbereich
2 Zweck
3 Begriffe
4 Mitgeltende Normen
5 Seilrollen
5.1 Gestaltung
5.2 Herstellverfahren und Werkstoffe
5.3 Wärmebehandlung
5.4 Verschleissminderung
5.4.1 Vergüten
5.4.2 Härtung
5.4.3 Auftragsschweissung
5.5 Mass-, Form- und Lagetoleranzen
5.6 Anforderungen an gegossene Seilrollen
5.7 Anforderungen an geschweisste Seilrollen
5.8 Anforderungen an geschmiedete Seilrollen
5.9 Bescheinigungen über Werkstoffprüfungen
5.10 Kennzeichnung
5.11 Sonstige Anforderungen
Weitere Normen
This Standard is included in DIN Handbook 185.
DocumentType |
Standard
|
Pages |
6
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Current
|
DIN HDBK 185 : 2ED 1995 | MATERIALS HANDLING 2. STANDARDS FOR CRANES AND OTHER LIFTING APPLIANCES (2) FROM DIN 15049 |
DIN 15062-2:1982-07 | CRANES; SHEAVES FOR WIRE ROPES; DIMENSIONS FOR HUBS AND BEARINGS |
DIN 15428:1978-08 | LIFTING APPLIANCES; LOAD SUSPENDING DEVICES, TECHNICAL SPECIFICATIONS |
DIN 15421-1:1982-07 | CRANES; BOTTOM BLOCKS; TYPE B ROPE PULLEYS WITH DEEP GROOVE BALL BEARING AND INTERNAL SLEEVE |
DIN 15062-1:1982-07 | CRANES; SHEAVES FOR WIRE ROPES; SELECTED RANGES AND ASSOCIATION OF DIAMETERS AND OVERALL BREADTH DIMENSIONS |
DIN 8563-3:1985-10 | QUALITY ASSURANCE OF WELDING OPERATIONS; FUSION WELDED JOINTS IN STEEL (EXCEPT BEAM WELDED JOINTS); REQUIREMENTS, CLASSIFICATION |
DIN 15061-1:1977-08 | LIFTING APPLIANCES; GROOVE PROFILES FOR WIRE ROPE SHEAVES |
DIN 15422-2:1982-07 | CRANES; BOTTOM BLOCKS; INTERNAL SLEEVES AND SPACER SLEEVES FOR TYPE A ROPE PULLEYS WITH CYLINDRICAL ROLLING BEARING AND INTERNAL SLEEVE |
DIN 17100:1980-01 | STEELS FOR GENERAL STRUCTURAL PURPOSES - QUALITY STANDARD |
DIN 15421-3:1982-07 | CRANES; BOTTOM BLOCKS; SEALING COVERS FOR TYPE B ROPE PULLEYS WITH DEEP GROOVE BALL BEARING AND INTERNAL SLEEVE |
DIN 1685-1:1998-08 | ROUGH CASTINGS OF CAST IRON WITH SPHEROIDAL GRAPHITE - GENERAL TOLERANCES, MACHINING ALLOWANCES |
DIN 7522:1944-08 | STEEL FORGINGS, TECHNICAL RECOMMENDATION FOR SUPPLY, DESIGN AND PRODUCTION, GENERAL RULES FOR DESIGNING INCLUDING EXAMPLES |
DIN 8563-1:1978-10 | QUALITY ASSURANCE OF WELDED STRUCTURES; FUNDAMENTALS |
DIN 15421-2:1982-07 | CRANES; BOTTOM BLOCKS; INTERNAL SLEEVES AND SPACER SLEEVES FOR TYPE B ROPE PULLEYS WITH DEEP GROOVE BALL BEARING AND INTERNAL SLEEVE |
DIN 17014-1:1988-08 | HEAT TREATMENT OF FERROUS MATERIALS - TERMINOLOGY |
DIN 50049:1992-04 | METALLIC PRODUCTS; TYPES OF INSPECTION DOCUMENTS |
DIN 7526:1969-01 | STEEL DROP FORGINGS - TOLERANCES |
DIN 1681:1985-06 | CAST STEELS FOR GENERAL PURPOSES - TECHNICAL DELIVERY CONDITIONS |
DIN 1693-1:1973-10 | CAST IRON WITH NODULAR GRAPHITE - UNALLOYED AND LOW ALLOY GRADES |
DIN 15422-1:1982-07 | CRANES; BOTTOM BLOCKS; TYPE A ROPE PULLEYS WITH CYLINDRICAL ROLLING BEARING AND INTERNAL SLEEVE |
DIN 1691:1985-05 | FLAKE GRAPHITE CAST IRON (GREY CAST IRON) - PROPERTIES |
DIN 7168-1:1981-05 | GENERAL TOLERANCES - LINEAR AND ANGULAR DIMENSIONS |
DIN 15100:1967-02 | SERIAL LIFTING EQUIPMENT; NOMENCLATURE |
DIN 15062-1:1982-07 | CRANES; SHEAVES FOR WIRE ROPES; SELECTED RANGES AND ASSOCIATION OF DIAMETERS AND OVERALL BREADTH DIMENSIONS |
DIN 1511:1978-04 | PATTERN EQUIPMENT FOR FOUNDRIES - PRODUCTION AND QUALITY |
DIN 1683-1:1998-08 | ROUGH STEEL CASTINGS - GENERAL TOLERANCES, MACHINING ALLOWANCES |
DIN 15422-3:1982-07 | CRANES; BOTTOM BLOCKS; SEALING COVERS FOR TYPE A ROPE PULLEYS WITH CYLINDRICAL ROLLING BEARING AND INTERNAL SLEEVE |
DIN 7184-1:1972-05 | TOLERANCES OF FORM AND POSITION; DEFINITIONS, INDICATION ON DRAWINGS |
DIN 15421-1:1982-07 | CRANES; BOTTOM BLOCKS; TYPE B ROPE PULLEYS WITH DEEP GROOVE BALL BEARING AND INTERNAL SLEEVE |
DIN 7521:1974-08 | STEEL FORGINGS, TECHNICAL CONDITIONS OF DELIVERY |
DIN 7523-1:1972-01 | STEEL FORGINGS; DESIGN OF DROP FORGINGS, DIRECTIVES FOR FORGING DRAWINGS |
DIN 1686-1:1998-08 | ROUGH CASTINGS OF GREY IRON - GENERAL TOLERANCES - MACHINING ALLOWANCES |
DIN 17200:1987-03 | STEELS FOR QUENCHING AND TEMPERING - TECHNICAL DELIVERY CONDITIONS |
DIN 8524-1:1986-07 | IMPERFECTIONS IN METALLIC WELDED JOINTS; FUSION WELDED JOINTS; CLASSIFICATION, TERMINOLOGY |
DIN 8563-2:1978-10 | QUALITY ASSURANCE OF WELDED STRUCTURES - REQUIREMENTS ON FIRM |
DIN 7523-2:1986-09 | STEEL FORGINGS; DESIGN OF DROP AND PRESS FORGINGS; MACHINING ALLOWANCES, DRAFTS, EDGE RADII, FILLET RADII, BASE THICKNESSES, WALL THICKNESSES, RIB WIDTHS, AND RIB RADII |
DIN 15062-2:1982-07 | CRANES; SHEAVES FOR WIRE ROPES; DIMENSIONS FOR HUBS AND BEARINGS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.