DIN 17441:1997-02

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View superseded by

STAINLESS STEELS - TECHNICAL DELIVERY CONDITIONS FOR COLD ROLLED STRIPS AND SLIT COILS STRIP AND SHEETS CUT FROM SUCH STRIPS FOR PRESSURE PURPOSES

Available format(s):

Superseded date: 01-06-2000

Language(s):

Published date: 12-01-2013

Publisher: German Institute for Standardisation (Deutsches Institut für Normung)

Table of Contents - (Show below) - (Hide below)

Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Definitionen
   3.1 Nichtrostende Stähle
   3.2 Wärmebehandlungsarten
4 Masse und Grenzabmasse
5 Gewichtserrechnung
6 Bezeichnung und Bestellung
7 Anforderungen
   7.1 Herstellverfahren
   7.2 Leiferzustand
   7.3 Chemische Zusammensetzung
   7.4 Korrosionschemische Eigenschaften
   7.5 Mechanische Eigenschaften
   7.6 Oberflächenbeschaffenheit
   7.7 Sprödbruchunempfindlichkeit und Kaltzähigkeit
8 Prüfung
   8.1 Vereinbarung von Prüfungen und Bescheinigungen
       über Materialprüfungen
   8.2 Prüfumfang
   8.3 Probenahme und Probenvorbereitung
   8.4 Durchführung der Prüfungen
   8.5 Wiederholungsprüfungen
9 Kennzeichnung
   9.1 Umfang der Kennzeichnung
   9.2 Art der Kennzeichnung
10 Beanstandungen
Anhang A (informativ) Ergänzende Angaben
Anhang B (informativ) Literaturhinweise

Abstract - (Show below) - (Hide below)

Standard refers to cold rolled strip in thicknesses up to 6mm and widths up to 1600mm, made from stainless steels with a wide range of uses. Sheet and plate cut from strip and to slit strip produced by longitudinal slitting and to rods (strips) cut therefrom. Hot rolled strip, wire rod, plate and sheet, drawn wire, steel bars, forgings and semi-finished products made from stainless steels are specified in DIN 17440, stainless tubes and pipes are contained in DIN 17455 to DIN 17458 CONTAINED IN DIN HDBK 405

General Product Information - (Show below) - (Hide below)

Document Type	Standard
ISBN
Pages
Published
Publisher	German Institute for Standardisation (Deutsches Institut für Normung)
Status	Superseded
Superseded By	DIN EN 10028-7:2016-10

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
EURONORM 141 : 1979	Similar to
ISO 683-13:1974	Similar to
EURONORM 88 : LATEST	Similar to

Standards Referenced By This Book - (Show below) - (Hide below)

DIN 6616:1989-09	HORIZONTAL STEEL TANKS, SINGLE- AND DOUBLE-WALLED, FOR THE ABOVE-GROUND STORAGE OF WATER-POLLUTING, INFLAMMABLE AND NON-INFLAMMABLE LIQUIDS
DIN 68131:1994-05	CASTORS FOR FURNITURE - CASTORS FOR SWIVELLING CHAIRS AND SWIVELLING EASY CHAIRS - REQUIREMENTS AND TESTING
DIN 6618-1:1989-09	VERTICAL STEEL TANKS, SINGLE-WALLED FOR THE ABOVE-GROUND STORAGE OF WATER-POLLUTING, INFLAMMABLE AND NON-INFLAMMABLE LIQUIDS
DIN 50930-4:1993-02	CORROSION OF METALS; CORROSION OF METALLIC MATERIALS UNDER CORROSION LOAD BY WATER INSIDE OF TUBES, TANKS AND APPARATUS; EVALUATION OF THE CORROSION LIKELIHOOD OF STAINLESS STEELS
DIN 18461:1989-02	EAVE GUTTERS, EXTERNAL RAINWATER PIPE SECTIONS AND FITTINGS MADE OF METAL - DIMENSIONS, MATERIALS
DIN 18160-1:2001-12	CHIMNEYS - PART 1: DESIGN AND PERFORMANCE
DIN 8556-1:1986-05	FILLER METALS FOR WELDING STAINLESS AND HEAT RESISTANT STEELS; DESIGNATION, TECHNICAL DELIVERY CONDITIONS
DIN 18515-1:1998-08	CLADDING FOR EXTERNAL WALLS - PART 1: TILES FIXED WITH MORTAR - PRINCIPLES OF DESIGN AND APPLICATION
DIN 25452:1992-04	MECHANICAL DESIGN OF FUEL ELEMENT STORAGE POOL IN NUCLEAR POWER PLANTS WITH LIGHT-WATER REACTORS
DIN 19565-1:1989-03	PIPES AN FITTINGS OF GLASS FIBRE REINFORCED PLASTICS (UP-GF) FOR BURIED SEWERS AND DRAINS - CENTRIFUGAL CASTED, FILLED - DIMENSIONS, TECHNICAL TERMS OF DELIVERY
ASTM A 947M : 2016 : REDLINE	Standard Specification for Textured Stainless Steel Sheet [Metric]
DIN 4133:1991-11	STEEL STACKS
DIN 4702-1:1990-03	BOILERS FOR CENTRAL HEATING, TERMS, REQUIREMENTS, TESTING, MARKING
DIN 6624-1:1989-09	Horizontal single-wall steel tanks with capacities between 1000 and 5000 litres, for the above ground storage of flammable and non-flammable water polluting liquids
VDE 0370-8 : 1995	GASSING OF INSULATING LIQUIDS UNDER ELECTRICAL STRESS AND IONIZATION
DIN IEC 60628 : 1995	GASSING OF INSULATING LIQUIDS UNDER ELECTRICAL STRESS AND IONIZATION
DIN 17280:1985-07	STEELS WITH LOW TEMPERATURE TOUGHNESS - TECHNICAL DELIVERY CONDITIONS FOR PLATE, SHEET, STRIP, WIDE FLATS, SECTIONS, BARS AND FORGINGS
DIN 17457:1985-07	WELDED CIRCULAR AUSTENITIC STAINLESS STEEL TUBES SUBJECT TO SPECIAL REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS

Standards Referencing This Book - (Show below) - (Hide below)

DIN 50114:1981-08	TESTING OF METALS; TENSILE TEST ON SHEET OR STRIP LESS THAN 3 MM THICK, NOT USING AN EXTENSOMETER
DIN 17456:1999-02	SEAMLESS CIRCULAR STAINLESS STEEL TUBES WITH GENERAL QUALITY REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS
DIN 17014-1:1988-08	HEAT TREATMENT OF FERROUS MATERIALS - TERMINOLOGY
DIN 50049:1992-04	METALLIC PRODUCTS; TYPES OF INSPECTION DOCUMENTS
DIN 17457:1985-07	WELDED CIRCULAR AUSTENITIC STAINLESS STEEL TUBES SUBJECT TO SPECIAL REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS
DIN 17010:1985-06	GENERAL TECHNICAL DELIVERY CONDITIONS FOR STEEL AND STEEL PRODUCTS
DIN 17458:1985-07	SEAMLESS CIRCULAR AUSTENITIC STAINLESS STEEL TUBES SUBJECT TO SPECIAL REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS
DIN 50145:1975-05	TESTING OF METALLIC MATERIALS; TENSILE TEST
DIN 59381:1980-08	FLAT PRODUCTS OF STEEL; COLD ROLLED STRIP OF STAINLESS STEEL AND OF HEAT RESISTING STEELS; DIMENSIONS, PERMISSIBLE DIMENSIONAL DEVIATIONS, DEVIATIONS OF FORM AND WEIGHT
DIN 59382:1975-08	FLAT STEEL PRODUCTS; COLD ROLLED WIDE STRIP AND SHEET OF STAINLESS STEELS; DIMENSIONS, PERMISSIBLE VARIATIONS ON DIMENSIONS AND FORM
DIN 50914:1996-09	TESTING THE RESISTANCE OF STAINLESS STEELS TO INTERGRANULAR CORROSION - METHOD BY USING COPPER SULFATE AND SULFURIC ACID - STRAUSS TEST
DIN 17455:1999-02	WELDED CIRCULAR STAINLESS STEEL TUBES WITH GENERAL QUALITY REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS
DIN 50133:1985-02	TESTING OF METALLIC MATERIALS; VICKERS HARDNESS TEST, HV 0.2 TO HV 100
DIN 50351:1985-02	TESTING OF METALLIC MATERIALS - BRINELL HARDNESS TEST
DIN 17440:2001-03	STAINLESS STEELS - TECHNICAL DELIVERY CONDITIONS FOR DRAWN WIRE

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart