DIN 1952:1982-07
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
MEASUREMENT OF FLUID FLOW BY MEANS OF ORIFICE PLATES, NOZZLES AND VENTURI TUBES INSERTED IN CIRCULAR CROSS SECTION CONDUITS RUNNING FULL (VDI RULES FOR MEASUREMENT OF FLUID)
Superseded date
01-11-1995
Superseded by
Published date
12-01-2013
Sorry this product is not available in your region.
| DocumentType |
Standard
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| ISO 5167-1:2003 | Corresponds |
| DIN 19214-2:1985-07 | FLOW MEASUREMENT - DIFFERENTIAL PRESSURE DEVICES WITH FLANGES TAPS, NOMINAL DIAMETER 10 TO 400, NOMINAL PRESSURE 10 TO 100 - SEALING SURFACE PROJECTION AND RECESS |
| DIN 4341-1:1979-08 | GAS TURBINES - ACCEPTANCE TESTS |
| DIN 19214-4:1985-07 | FLOW MEASUREMENT - DIFFERENTIAL PRESSURE DEVICES WITH ORIFICE FLANGES - METER RUNS, NOMINAL DIAMETER 10 TO 200 |
| DIN 28426-1:1983-08 | Vacuum technology; acceptance specifications for rotary plunger vacuum pumps, sliding vane rotary vacuum pumps and rotary piston vacuum pumps for the ranges of rough and medium vacuum |
| DIN 19206-1:1985-07 | FLOW MEASUREMENT - ORIFICE PLATES FOR INSERTION BETWEEN FLANGES, NOMINAL DIAMETER 50 TO 2000, NOMINAL PRESSURE 1 TO 100 - SEALING SURFACE RAISED FACE |
| DIN 19206-2:1985-07 | FLOW MEASUREMENT - ORIFICE PLATES FOR INSERTION BETWEEN FLANGES, NOMINAL DIAMETER 10 TO 400, NOMINAL PRESSURE 10 TO 100 - SEALING SURFACE PROJECTION AND RECESS |
| DIN 19215:1980-01 | FLOW MEASUREMENT - OVERALL LENGTHS OF DIFFERENTIAL PRESSURE DEVICES WITH WELD ENDS |
| VDI/VDE 2640 Blatt 3:1983-11 | Measurement of gas flow in circular; annular or rectangular sections of conduits velocity area method |
| VDE 0116 : 1989 | ELECTRICAL EQUIPMENT OF FURNACES |
| DIN VDE 0116 : 1989 | ELECTRICAL EQUIPMENT OF FURNACES |
| DIN 19205-1:1988-08 | FLOW MEASUREMENT - DIFFERENTIAL PRESSURE DEVICES WITH CORNER TAPS - METER RUNS NOMINAL DIAMETER 10 TO 200 AND CARRIER RINGS NOMINAL DIAMETER FROM 50 TO 2000 |
| DIN 4702-2:1990-03 | CENTRAL HEATING BOILERS, TEST CODE |
| VDI/VDE 2176 Blatt 1:1971-02 | Fluidic characteristic quantities of throttle valves and their determination |
| VDI/VDE 2643:1993-01 | Measurement of fluid flow by means of vortex flow meters |
| VDI 2045 Blatt 1:1993-08 | Acceptance and performance tests on turbo compressors and displacement compressors; test procedure and comparison with guaranteed values |
| VDI 2066-5 : 1987 | PARTICULATE MATTER MEASUREMENT - DUST MEASUREMENT IN FLOWING GASES; PARTICLE SIZE SELECTIVE MEASUREMENT BY IMPACTION METHOD - CASCADE IMPACTOR |
| VDI 3676:1999-10 | Inertial Separators |
| VDI/VDE 2040 Blatt 5:1989-03 | Calculation principles for the measurement of fluid flow using orifice plates, nozzles and venturi tubes; uncertainties |
| VDE-VDI 3513 : 1971 | PLUMMET FLOW-METERS; CALCULATION PROCEDURE |
| VDI/VDE 2041:1991-04 | Measurement of fluid flow with primary devices; orifice plates and nozzles for special applications |
| VDI/VDE 2040 Blatt 2:1987-04 | Calculation principles for measurement of fluid flow using orifice plates, nozzles and venturi tubes; equations and formulae |
| DIN 1945-1:1980-11 | DISPLACEMENT COMPRESSOR; THERMODYNAMIC ACCEPTANCE AND PERFORMANCE TEST |
| DIN 19206-3:1985-07 | FLOW MEASUREMENT - ORIFICE PLATES FOR INSERTION BETWEEN FLANGES, NOMINAL DIAMETER 10 TO 400, NOMINAL PRESSURE 64 TO 400 - SEALING SURFACE LENS-SHAPE |
| DIN 1943:1975-02 | THERMAL ACCEPTANCE TESTS OF STEAM TURBINES |
| DIN 1947:1989-05 | THERMAL PERFORMANCE ACCEPTANCE TESTING OF WATER COOLING TOWERS - DIN (VDI CODE OF PRACTICE) 1947 |
| DIN 28427:1983-02 | VACUUM TECHNOLOGY; ACCEPTANCE SPECIFICATIONS FOR DIFFUSIONS PUMPS AND VAPOUR JET VACUUM PUMPS FOR VAPOUR PRESSURES OF THE PUMP FLUID <1 MBAR |
| DIN 19570-4:1979-08 | WASTE BRINE, DIRECTIVES FOR TESTING - METHODS OF CONTINUOUS MEASURING |
| DIN 45646 : 1988 | MEASUREMENT PROCEDURES FOR DUCTED SILENCERS; INSERTION LOSS, TRANSMISSION LOSS, FLOW NOISE, TOTAL PRESSURE LOSS |
| DIN 19214-1:1985-07 | FLOW MEASUREMENT - DIFFERENTIAL PRESSURE DEVICES WITH FLANGES TAPS - NOMINAL DIAMETER 50 TO 500, NOMINAL PRESSURE 10 TO 100 - SEALING SURFACE RAISED FACE |
| DIN 14811-2:1977-11 | FIRE HOSES; PRESSURE LOSS TEST |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.