|
DIN EN 10255:2015-05 (Draft)
|
NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS |
|
DIN 2403:2014-06
|
IDENTIFICATION OF PIPELINES ACCORDING TO THE FLUID CONVEYED |
|
DIN 14494:1979-03
|
WATER SPRAY SYSTEMS, FIXED, WITH OPEN NOZZLES |
|
DIN EN 1254-4:1998-03
|
Copper and copper alloy plumbing fittings - Part 4: Fittings combining other end connections with capillary or compression ends |
|
DIN 50930-6:2013-10
|
Corrosion of metals - Corrosion of metallic materials under corrosion load by water inside of pipes, tanks and apparatus - Part 6: Evaluation process and requirements regarding the hygienic suitability in contact with drinking water |
|
DVGW GW 6 : 2014
|
LOET-, UEBERGANGS- UND GEWINDEFITTINGS AUS KUPFER UND KUPFERLEGIERUNGEN IN DER GAS- UND TRINKWASSER-INSTALLATION; ANFORDERUNGEN UND PRUEFUNGEN |
|
DIN EN 969:2009-07
|
DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR GAS PIPELINES - REQUIREMENTS AND TEST METHODS |
|
DIN 1988-7:2004-12
|
CODES OF PRACTICE FOR DRINKING WATER INSTALLATIONS (TRWI) - PART 7: PREVENTION OF CORROSION DAMAGE AND CALCAREOUS DEPOSIT FORMATION - DVGW CODE OF PRACTICE |
|
DIN EN 13077:2008-09
|
DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - AIR GAP WITH NON-CIRCULAR OVERFLOW (UNRESTRICTED) - FAMILY A, TYPE B |
|
DIN 2459:2011-06
|
INSEPARABLE ELASTOMER SEALED CONNECTORS MADE OF METAL FOR METALLIC PIPES FOR USE IN DRINKING WATER SYSTEM INSTALLATION - GENERAL REQUIREMENTS AND TEST METHODS |
|
DIN 14495:1977-07
|
IRRIGATION OF OVERGROUND TANKS FOR STORAGE OF COMBUSTIBLE FLUIDS IN CASE OF FIRE |
|
DIN 1988-200:2012-05
|
Codes of practice for drinking water installations - Part 200: Installation Type A (closed system) - Planning, components, apparatus, materials; DVGW code of practice |
|
DIN EN 10242:1995-03
|
THREADED PIPE FITTING IN MALLEABLE CAST IRON |
|
DIN 14463-2:2003-07
|
Water systems for fire extinguishing - Filling and draining devices opeated by remote control - Part 2: For water extinguishing systems with empty and non-pressure pipework; Requirements and testing |
|
DVGW W 534 : 2015
|
ROHRVERBINDER UND ROHRVERBINDUNGEN IN DER TRINKWASSER-INSTALLATION |
|
DVGW GW 541 : 2004
|
ROHRE AUS NICHTROSTENDEN STAEHLEN FUER DIE GAS- UND TRINKWASSER-INSTALLATION - ANFORDERUNGEN UND PRUEFUNGEN |
|
DIN EN 1074-6:2009-03
|
VALVES FOR WATER SUPPLY - FITNESS FOR PURPOSE REQUIREMENTS AND APPROPRIATE VERIFICATION TESTS - PART 6: HYDRANTS |
|
DIN 14463-1:2007-01
|
WATER SYSTEMS FOR FIRE EXTINGUISHING - FILLING AND DRAINING DEVICES OPERATED BY REMOTE CONTROL - PART 1: FOR HOSE REEL SYSTEMS |
|
DIN 4067:1975-11
|
Water; indicating labels, distribution pipes and pipelines |
|
DIN EN 14384:2005-10
|
PILLAR FIRE HYDRANTS |
|
DIN EN 12845:2016-04
|
FIXED FIREFIGHTING SYSTEMS - AUTOMATIC SPRINKLER SYSTEMS - DESIGN, INSTALLATION AND MAINTENANCE |
|
DIN EN 12259-2:2001-08
|
FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR SPRINKLER AND WATER SPRAY SYSTEMS - PART 2: WET ALARM VALVE ASSEMBLIES |
|
DVGW VP 652 : 2006
|
KUPFERROHRLEITUNG MIT FEST HAFTENDEM KUNSTSTOFFMANTEL FUER DIE TRINKWASSER-INSTALLATION |
|
DIN EN 1254-2:1998-03
|
Copper and copper alloy plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes |
|
DIN EN 14339:2005-10
|
UNDERGROUND FIRE HYDRANTS |
|
DIN 4066:1997-07
|
INFORMATION SIGNS FOR FIRE BRIGADE |
|
DIN 1988:1962-01
|
DRINKING WATER PIPE INSTALLATIONS ON PREMISES - TECHNICAL SPECIFICATIONS FOR INSTALLATION AND OPERATION |
|
DIN 2607:2002-05
|
TUBE BENDS - FOR BUTT-WELDING OF COPPER |
|
DIN 14461-1:2016-10
|
DELIVERY VALVE INSTALLATIONS FOR FIREFIGHTING PURPOSES - PART 1: WALL HYDRANTS WITH SEMI-RIGID HOSE |
|
DVGW GW 392 : 2009
|
SEAMLESS COPPER PIPES FOR GAS AND WATER INSTALLATIONS; SPECIFICATIONS AND TESTING REQUIREMENTS |
|
DIN 14461-6:2016-10
|
DELIVERY VALVE INSTALLATIONS FOR FIREFIGHTING PURPOSES - PART 6: WALL HYDRANTS WITH FLAT HOSE FOR TRAINED PERSONNEL |
|
DIN EN 1254-5:1998-03
|
Copper and copper alloy plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes |
|
DIN 14464:2012-09
|
ASSEMBLY WITH DIRECT CONNECTION FOR SPRINKLER SYSTEMS AND EXTINGUISHING SYSTEMS WITH OPEN NOZZLES - REQUIREMENTS AND TESTING |
|
DVGW GW 2 : 2012
|
ASSEMBLAGE DE TUBES CUIVRE POUR INSTALLATIONS DE GAZ ET D'EAU A L'INTERIEUR DE TERRAINS ET DE BATIMENTS |
|
DIN 14462:2012-09
|
Water conduit for fire extinguishing - Planning, installation, operation and maintenance of fire hose systems and pillar fire hydrant and underground fire systems |
|
DIN EN 12259-3:2001-08
|
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 3: Dry alarm valve assemblies (includes Amendment A1:2001); English version of DIN EN 12259-3:2000 + A1:2001 |
|
DIN 14461-3:2016-10
|
DELIVERY VALVE INSTALLATIONS FOR FIREFIGHTING PURPOSES - PART 3: FIRE HOSE VALVES FOR NOMINAL PRESSURE PN 16 |
|
DIN EN 806-5:2012-04
|
Specifications for installations inside buildings conveying water for human consumption - Part 5: Operation and maintenance |
|
DIN 14489:1985-05
|
SPRINKLER EXTINGUISHING SYSTEMS - GENERAL FUNDAMENTALS |
|
DIN 1988-500:2011-02
|
Codes of practice for drinking water installations - Part 500: Pressure boosting stations with RPM-regulated pumps; DVGW code of practice |
|
DVGW GW 8 : 2014
|
KAPILLARLOETFITTINGS AUS KUPFER IN DER GAS- UND TRINKWASSER-INSTALLATION; ANFORDERUNGEN UND PRUEFUNGEN |
|
DIN 28601:2000-06
|
DUCTILE IRON PIPES AND FITTINGS - SCREWED SOCKET JOINTS - ASSEMBLY, SOCKETS, SCREW RINGS, SEALING RINGS AND SLIP RINGS |
|
DVGW W 405 : 2008
|
WATER FOR FIRE FIGHTING TO BE MADE AVAILABLE BY PUBLIC DRINKING WATER SUPPLY SYSTEMS |
|
DIN 1986-100:2016-12
|
DRAINAGE SYSTEMS ON PRIVATE GROUND - PART 100: SPECIFICATIONS IN RELATION TO DIN EN 752 AND DIN EN 12056 |
|
DIN CEN/TS 14816:2009-05
|
FIXED FIREFIGHTING SYSTEMS - WATER SPRAY SYSTEMS - DESIGN, INSTALLATION AND MAINTENANCE |
|
DIN EN 1717:2011-08
|
Protection against pollution of potable water installations and general requirements of devices to prevent pollution by backflow |
|
DIN EN 1254-1:1998-03
|
Copper and copper alloy plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes |
|
DVGW W 331 : 2006
|
SELECTION, INSTALLATION AND OPERATION OF HYDRANTS |