DIN 28055-1:2002-04
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
CHEMICAL APPARATUS - SURFACE PROTECTION WITH ORGANIC LININGS FOR APPLICATION TO METALLIC COMPONENTS - PART 1: REQUIREMENTS
Hardcopy , PDF
01-01-2008
English
01-01-2002
Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Anforderungen
3.1 Werkstoffe
3.2 Konstruktion des Bauteils
3.3 Herstellung der Auskleidung
3.4 Ausgekleidetes Bauteil
4 Abnahme
5 Nachbesserungen schadhafter Stellen
6 Verpackung, Transport, Lagerung und Montage
6.1 Allgemeines
6.2 Verpackung und Transport
6.3 Lagerung
6.4 Montage
7 Aussenanstrich
Specifies requirements for organic linings to be applied to metal vessels, pipes and other process plant components that are in contact with chemical substances.
DevelopmentNote |
Supersedes DIN 28055 (07/2002)
|
DocumentType |
Standard
|
Pages |
6
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Superseded
|
SupersededBy |
DIN 28052-4:1995-12 | CHEMICAL APPARATUS - SURFACE TREATMENT OF CONCRETE COMPONENTS IN PROCESS PLANTS USING NON-METALLIC MATERIALS - PART 4: COATING |
DIN 28055-2:2002-04 | CHEMICAL APPARATUS - SURFACE PROTECTION WITH ORGANIC LININGS FOR APPLICATION TO METALLIC COMPONENTS - PART 2: PROOF OF SUITABILITY AND TESTING |
DIN 28051:1997-07 | CHEMICAL APPARATUS - ORGANIC COATINGS AND LININGS ON METAL COMPONENTS - DESIGN OF METAL COMPONENTS |
DIN 4942:1999-01 | THREADED STEEL RISING PIPES FOR RAISING OF WATER - NOMINAL DIAMETER DN 50 TO DN 200 |
ISO 8503-2:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel — Comparator procedure |
DIN 28053:1997-04 | CHEMICAL APPARATUS - ORGANIC COATINGS AND LININGS ON METAL COMPONENTS - REQUIREMENTS FOR METAL SURFACES |
DIN EN ISO 1043-1:2016-09 | PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMERS AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011 + AMD.1:2016) |
DIN 28051:1997-07 | CHEMICAL APPARATUS - ORGANIC COATINGS AND LININGS ON METAL COMPONENTS - DESIGN OF METAL COMPONENTS |
DIN 28055-2:2002-04 | CHEMICAL APPARATUS - SURFACE PROTECTION WITH ORGANIC LININGS FOR APPLICATION TO METALLIC COMPONENTS - PART 2: PROOF OF SUITABILITY AND TESTING |
DIN ISO 1629:2015-03 | RUBBER AND LATICES - NOMENCLATURE (ISO 1629:2013) |
EN ISO 8503-1:2012 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces (ISO 8503-1:2012) |
EN ISO 8503-2:2012 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure (ISO 8503-2:2012) |
DIN EN ISO 8503-1:2013-05 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 1: SPECIFICATIONS AND DEFINITIONS FOR ISO SURFACE PROFILE COMPARATORS FOR THE ASSESSMENT OF ABRASIVE BLAST-CLEANED SURFACES (ISO 8503-1:2012) |
ISO 12944-4:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and surface preparation |
ISO 8503-1:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces |
DIN EN ISO 12944-4:2016-07 (Draft) | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 4: TYPES OF SURFACE AND SURFACE PREPARATION (ISO 12944-4:2017) |
DIN EN ISO 8503-2:2012-06 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure (ISO 8503-2:2012) |
ISO 1043-1:2011 | Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
ISO 1629:2013 | Rubber and latices — Nomenclature |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.