DIN 28062:1978-08
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
CHEMICAL EQUIPMENT; BUILDING MATERIALS FOR BRICK LINING, CLASSIFICATION, PROPERTIES, TESTING
01-04-2010
12-01-2013
1 Geltungsbereich
2 Mitgeltende Normen (siehe Seite 6 bis Seite 8)
3 Allgemeine Angaben
4 Einteilung der Bau- und Werkstoffe
Erläuterungen
Diese Norm gibt eine Übersicht über die Bau- und Werkstoffe für die Ausmauerung chemischer Apparate und Behälter nach DIN 28 060 und DIN 28061.
DocumentType |
Standard
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Superseded
|
SupersededBy |
DIN 28052-5:1997-04 | CHEMICAL APPARATUS - SURFACE TREATMENT OF CONCRETE COMPONENTS IN PROCESS PLANTS USING NON-METALLIC MATERIALS - PART 5: COMBINED COATINGS |
DIN 28061:1986-11 | BRICK-LINING OF VESSELS AND APPARATUS - MATERIALS, CONSTRUCTION, OPERATION |
DIN 28060:1986-11 | BRICK-LINED VESSELS AND APPARATUS - DESIGN AND CONSTRUCTION |
DIN 53152:1993-05 | PAINTS AND VARNISHES; BEND TEST AN COATINGS; METHOD USING CYLINDRICAL MANDREL |
VDE 0304-1 : 1959 | TESTING OF SOLID INSULATING MATERIALS FOR ASSESSMENT OF THEIR THERMAL STABILITY - DETERMINATION OF THERMAL PROPERTIES OF SOLID INSULATING MATERIALS |
DIN 53504:2015-08 (Draft) | TESTING OF RUBBER - DETERMINATION OF TENSILE STRENGTH AT BREAK, TENSILE STRESS AT YIELD, ELONGATION AT BREAK AND STRESS VALUES IN A TENSILE TEST |
DIN 53508:2000-03 | Accelerated ageing of rubber |
DIN 50133-2:1972-12 | PRUEFUNG METALLISCHER WERKSTOFFE; HAERTEPRUEFUNG NACH VICKERS, PRUEFKRAFTBEREICH: 1,96 BIS 49 N (0,2 BIS 5 KP) (KLEINLASTBEREICH) |
DIN 50103-1:1984-03 | TESTING OF METALLIC MATERIALS; ROCKWELL HARDNESS TEST; C, A, B, F SCALES |
DIN 52112:1988-08 | TESTING THE FLEXURAL STRENGTH OF NATURAL STONE |
DIN 52328:1985-03 | TESTING OF GLASS; DETERMINATION OF COEFFICIENT OF MEAN LINEAR THERMAL EXPANSION |
DIN 1164-5:1978-11 | PORTLAND-, IRON PORTLAND-, BLAST-FURNACE AND TRASS CEMENT - DETERMINATION OF THE SETTING TIMES WITH THE VICAT INSTRUMENT |
DIN 53518:1979-03 | TESTING OF RUBBER AND ELASTOMERS; DETERMINATION OF TENSION SET AFTER CONSTANT DEFORMATION |
DIN 1996-7:1992-12 | TESTING OF ASPHALT - DETERMINATION OF BULK DENSITY, COMPACTED DENSITY, VOID CONTENT AND DEGREE OF COMPACTION |
DIN 1995 : 1980 | BITUMINOUS BINDERS FOR ROAD CONSTRUCTION - REQUIREMENTS |
DIN 51065-1:1985-08 | TESTING OF CERAMIC MATERIALS; DETERMINATION OF BULK DENSITY OF SHAPED ARTICLES AND FRAGMENTS |
DIN 4030 : 1969 | EVALUATION OF LIQUIDS, SOILS AND GASES, AGGRESSIVE TO CONCRETE |
DIN 52612-1:1979-09 | TESTING OF THERMAL INSULATING MATERIALS; DETERMINATION OF THERMAL CONDUCTIVITY BY THE GUARDED HOT PLATE APPARATUS; TEST PROCEDURE AND EVALUATION OF RESULTS |
DIN 4051:2002-04 | Sewer clinkers - Requirements, testing, quality control |
DIN 53456:1973-01 | TESTING OF PLASTICS; INDENTATION HARDNESS TEST |
DIN 50145:1975-05 | TESTING OF METALLIC MATERIALS; TENSILE TEST |
DIN 52103:1988-10 | DETERMINATION OF WATER ABSORPTION AND SATURATION COEFFICIENT OF NATURAL STONE AND MINERAL AGGREGATES |
DIN 51102-2:1976-05 | TESTING OF CERAMIC MATERIALS; DETERMINATION OF THE ACID RESISTANCE METHOD WITH GRAINED TEST MATERIAL |
DIN 52108:2010-05 | Testing of inorganic non-metallic materials - Wear test using the grinding wheel according to Boehme - Grinding wheel method |
DIN 53458 : LATEST | TESTING OF PLASTICS - DETERMINATION OF THE DIMENSIONAL STABILITY UNDER HEAT BY THE MARTENS METHOD |
DIN 28058 : 1971 | HOMOGENEOUS LEAD COATING OF CHEMICAL EQUIPMENT - MANUFACTURE AND TESTING |
DIN 53461:1987-01 | TESTING OF PLASTICS; DETERMINATION OF HEAT DEFLECTION TEMPERATURE UNDER LOAD |
DIN 1164-7:1978-11 | PORTLAND-, IRON PORTLAND-, BLAST-FURNACE-, AND TRASS CEMENT - DETERMINATION OF STRENGTH |
DIN 1164-6 : 1978 | PORTLAND-, IRON PORTLAND-, BLAST-FURNACE- AND TRASS CEMENT - DETERMINATION OF SOUNDNESS WITH THE BOILING TEST |
DIN 53482 : 1983 | METHODS OF TEST FOR MATERIALS FOR ELECTRICAL PURPOSES - MEASURING OF THE ELECTRICAL RESISTANCE OF NON-METALLIC MATERIALS |
DIN 51067-2:1977-05 | TESTING OF CERAMIC MATERIALS; DETERMINATION OF COLD CRUSHING STRENGTH OF REFRACTORIES WITH TOTAL POROSITY MORE THAN 45 % |
DIN 53505:2000-08 | TESTING OF RUBBER - SHORE A AND SHORE D HARDNESS TEST |
DIN 51056:1985-08 | TESTING OF CERAMIC MATERIALS; DETERMINATION OF WATER ABSORPTION AND APPARENT POROSITY |
DIN 53273:1977-07 | TESTING OF ADHESIVES OF FOOTWEAR MATERIALS; SOLVENT AND DISPERSION ADHESIVES, TENSILE STRENGTH OF BONDINGS |
DIN 53476:1979-08 | TESTING OF PLASTICS; DETERMINATION OF THE BEHAVIOUR AGAINST LIQUIDS |
DIN 51963:1980-12 | TESTING OF ORGANIC FLOOR COVERINGS (EXCEPT TEXTILE FLOOR COVERINGS); WEAR TESTING (20-CYCLES METHOD) |
DIN 1164-1 : 1994 AMD 1 1999 | CEMENT - PART 1: COMPOSITION, SPECIFICATIONS |
DIN 50133-1:1972-12 | TESTING OF METALLIC MATERIALS; VICKERS HARDNESS TEST; RANGE HV 0,2 TO HV 100 |
DIN 1164-3:1978-11 | PORTLAND-, IRON PORTLAND-, BLAST-FURNACE-, AND TRASS CEMENT - DETERMINATION OF COMPOSITION |
DIN 52913:2002-04 | TESTING OF STATIC GASKETS FOR FLANGE CONNECTIONS - COMPRESSION CREEP TESTING OF GASKETS MADE FROM SHEETS |
DIN 1164-2:1996-11 | CEMENT - PART 2: ATTESTATION OF CONFORMITY |
DIN 50332:1989-01 | SOLID PARTICLE EROSION TEST; BASIC RULES |
DIN 50103-2:1984-03 | TESTING OF METALLIC MATERIALS; ROCKWELL HARDNESS TEST; N AND T SCALES |
DIN 50351:1985-02 | TESTING OF METALLIC MATERIALS - BRINELL HARDNESS TEST |
DIN 1996-12 : 1985 | TESTING OF ASPHALT - COMPRESSION TESTING OF MASTIC ASPHALT |
DIN 52102:2013-10 | TEST METHODS FOR AGGREGATES - DETERMINATION OF DRY BULK DENSITY BY THE CYLINDER METHOD AND CALCULATION OF THE RATIO OF DENSITY |
DIN 1164-4 : 1978 | PORTLAND-, IRON PORTLAND-, BLAST-FURNACE-, AND TRASS CEMENT - DETERMINATION OF FINENESS OF GRINDING |
DIN 52105:1988-08 | TESTING THE COMPRESSIVE STRENGTH OF NATURAL STONE |
DIN 53155:1971-05 | TESTING OF PAINTS, VARNISHES AND SIMILAR COATING MATERIALS; CHIP TEST OF COATINGS (ACCORDING TO PETERS) |
DIN 53446:1962-10 | TESTING OF PLASTICS; DETERMINATION OF TEMPERATURE-TIME LIMITS |
DIN 1164-8:1978-11 | PORTLAND-, IRON PORTLAND-, BLAST-FURNACE-, AND TRASS CEMENT - DETERMINATION OF THE HEAT OF HYDRATION WITH THE SOLUTION CALORIMETER |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.