DIN 28125-1:1989-08
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
DN 150 TO DN 600 ROUND HINGED CLOSURES
Hardcopy , PDF
15-05-2020
German, English
01-01-1989
1 Anwendungsbereich
2 Formen
3 Zulässige Betriebedaten
4 Masse, Bezeichnung, Gewichte
4.1 Kompletter Verschluss aus unlegiertem Stahl
4.2 Kompletter Verschluss aus unlegiertem Stahl
mit Oberflächenschutz
4.3 Kompletter Verschluss aus nichtrostendem Stahl
4.4 Deckel, eben und gewölbt
4.5 Bezeichnung
5 Einzeltelle, Werkstoffe und Qualitätanachweis
6 Ausführung
6.1 Unlegierter Stahl
6.2 Unlegierter Stahl mit Oberflächenschutz
6.3 Nichtrostender Stahl
6.4 Laschen für Augenschrauben
6.5 Gelenk
6.6 Gelenk für Öffnungshilfe
6.7 Funktion des Gelenkes
7 Bolzen
8 Dichtungen
9 Kennzeichnung
Zitierte Normen und andere Unterlagen
Weitere Normen
Diese Norm ist anzuwenden für runde Klappverschlüsse aus unlegiertem Stahl, unlegiertem Stahl mit Oberflächenschutz und nichtrostendem Stahl an Apparaten, die vorzugsweise verfahrenstechnischen Zwecken dienen. Die Klappverschlüsse sind als Mannlöcher bzw. Besichtigungsöffnungen verwendbar. Sie entsprechen den Technischen Regeln Druckbehälter (TRB) und erfüllen deren Anforderungen. Die besonderen Bedingungen für Zugangsöffnungen entsprechend der Verordnung über gefährliche Stoffe (Gefahrstoffverordnung) bzw. den Richtlinien für Arbeiten in Behältern und engen Räumen (ZH1/77) sind zu beachten. Sie sind ausgelegt für die in der Tabelle 2 angegebenen zulässigen Betriebsdaten. Klappverschlüsse für andere Drücke und Temperaturen sind in Anlehnung an diese Norm auszuführen.
DevelopmentNote |
DRAFT 2017 issued in December 2017. (12/2017)
|
DocumentType |
Standard
|
Pages |
20
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Superseded
|
SupersededBy |
DIN 28124-1:2010-09 | Manhole closures - Part 1: For unpressurized vessels |
DIN 28124-2:2010-09 | Manhole closures - Part 2: For pressure vessels, from steel |
DIN 28125-3:1989-04 | HINGED COVERS - CIRCULAR SHAPE WITH PROTECTION RING AND SURFACE COATED - DN 500 AND DN 600 |
DIN 28130-1:1986-06 | AGITATOR VESSELS WITH AGITATION UNIT - NON-ALLOY AND STAINLESS STEEL VESSELS - TERMS, COMPONENT COMBINATIONS, SUMMARY |
DIN 28125-2:1989-04 | HINGED COVERS - ELLIPTICAL, 350 MM X 450 MM |
VDI 3478 Blatt 2:2008-04 | Biological waste gas purification - Biological trickle bed-reactors |
DIN 28125 Beiblatt 1:1989-04 | Hinged covers; example for construction of a lifting aid |
DIN 28136-2:2005-12 | AGITATOR VESSELS - PART 2: POSITIONS AND SIZES OF COVER NOZZLES IN NON-ALLOY AND STAINLESS STEEL VESSELS |
DIN 28130:2007-07 | CHEMICAL EQUIPMENT - SURVEY ON COMPONENTS OF AGITATOR VESSELS WITH AGITATION UNIT |
DIN 28124-3:2013-07 | Manhole closures - Part 3: For pressure, covered |
DIN 28129:1990-03 | Clamp nuts; for covers |
DIN 3754-1:1984-05 | GASKET MATERIALS - COMPRESSED ASBESTOS FIBRE SHEETS - DIMENSIONS, REQUIREMENTS, TESTING |
DIN 2691:1971-11 | SEALINGS FOR TONGUED AND GROOVED FLANGES - NOMINAL PRESSURE 10 TO 160 |
DIN 28129:1990-03 | Clamp nuts; for covers |
DIN 267-11:1980-01 | FASTENERS - TECHNICAL DELIVERY CONDITIONS (WITH ADDITIONS TO ISO 3506) - CORROSION-RESISTANT STAINLESS STEEL FASTENERS |
DIN 28126:1989-04 | DN 125 BOW CLOSURES FOR PROCESS EQUIPMENT |
DIN 17100:1980-01 | STEELS FOR GENERAL STRUCTURAL PURPOSES - QUALITY STANDARD |
DIN 94:1983-09 | SPLIT PINS |
DIN 1443:1974-03 | CLEVIS PINS WITHOUT HEAD |
VDI 2532:1978-01 | Surface protection with organic materials; shape and design of metallic structures to be protected |
DIN ISO 898-1:1989-01 | MECHANICAL PROPERTIES OF FASTENERS - BOLTS, SCREWS AND STUDS |
DIN 7346:1978-11 | SPRING TYPE STRAIGHT PINS, SLOTTED, SLIGHT TYPE |
DIN 17457:1985-07 | WELDED CIRCULAR AUSTENITIC STAINLESS STEEL TUBES SUBJECT TO SPECIAL REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS |
DIN 28124-4:2010-09 | Manhole closures - Part 4: Swivel devices |
DIN 1626:1984-10 | WELDED CIRCULAR UNALLOYED STEEL TUBES SUBJECT TO SPECIAL REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS |
DIN 17458:1985-07 | SEAMLESS CIRCULAR AUSTENITIC STAINLESS STEEL TUBES SUBJECT TO SPECIAL REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS |
DIN 28125-2:1989-04 | HINGED COVERS - ELLIPTICAL, 350 MM X 450 MM |
DIN 59382:1975-08 | FLAT STEEL PRODUCTS; COLD ROLLED WIDE STRIP AND SHEET OF STAINLESS STEELS; DIMENSIONS, PERMISSIBLE VARIATIONS ON DIMENSIONS AND FORM |
DIN 28040:2013-09 | Flange joints for process vessels - Flat gaskets |
DIN 7168-1:1981-05 | GENERAL TOLERANCES - LINEAR AND ANGULAR DIMENSIONS |
DIN 1440:1974-07 | WASHERS FOR CLEVIS PINS, FINISH MEDIUM |
DIN 1629:1984-10 | SEAMLESS CIRCULAR UNALLOYED STEEL TUBES SUBJECT TO SPECIAL REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS |
DIN 28125-3:1989-04 | HINGED COVERS - CIRCULAR SHAPE WITH PROTECTION RING AND SURFACE COATED - DN 500 AND DN 600 |
DIN 28125 Beiblatt 1:1989-04 | Hinged covers; example for construction of a lifting aid |
DIN 17155:1983-10 | CREEP RESISTANT STEEL PLATE AND STRIP - TECHNICAL DELIVERY CONDITIONS |
DIN 2512:1999-08 | FLANGES - TONGUE AND GROOVE, PN 160 - DESIGN SIZES - RINGS PN 10 TO PN 160 |
DIN ISO 1302:1993-12 | TECHNICAL DRAWINGS - METHOD OF INDICATING SURFACE TEXTURE |
DIN 2690:1966-05 | SEALINGS FOR FLANGES WITH PLAIN CONTACT SURFACES - NOMINAL PRESSURE 1 TO 40 |
DIN 28124-1:2010-09 | Manhole closures - Part 1: For unpressurized vessels |
DIN 1543:1981-10 | STEEL FLAT PRODUCTS - HOT ROLLED PLATE 3 TO 150 MM THICK - PERMISSIBLE DEVIATIONS OF DIMENSION, WEIGHT AND FORM |
DIN 28124-3:2013-07 | Manhole closures - Part 3: For pressure, covered |
DIN 28032:2005-06 | WELD FLANGES FOR PRESSURE VESSELS AND PROCESS APPARATUS OF NON-ALLOY STEEL |
DIN 444:2016-08 (Draft) | FASTENERS - EYE BOLTS |
DIN 17440:2001-03 | STAINLESS STEELS - TECHNICAL DELIVERY CONDITIONS FOR DRAWN WIRE |
DIN 28124-2:2010-09 | Manhole closures - Part 2: For pressure vessels, from steel |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.