DIN 28130-2:1986-06
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
AGITATOR VESSELS WITH AGITATION UNIT - GLASS LINED STEEL VESSELS - TERMS, COMPONENT COMBINATIONS, SUMMARY
Superseded date
01-07-2007
Superseded by
Published date
12-01-2013
Sorry this product is not available in your region.
1 Anwendungsbereich
2 Benennungen
3 Festlegungs- und Beschreibungsschema
Zitierte Normen und andere Unterlagen
Frühere Ausgaben
Änderungen
Erläuterungen
Internationale Patentklassifikation
DevelopmentNote |
Supersedes DIN 28130:1972. (07/2007)
|
DocumentType |
Standard
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Superseded
|
SupersededBy |
DIN 28006-2:2016-05 (Draft) | GENERAL TOLERANCES FOR AGITATOR VESSELS - PART 2: GLASS LINED AGITATOR VESSELS |
DIN 28152-2:1999-11 | Clamps for glass lined vessels - Part 2: Technical delivery conditions |
DIN 28145-6:1979-09 | PARTS WELDED TO GLASS LINED AGITATOR VESSELS; BRACKET |
DIN 28145-2:1985-06 | PARTS WELDED TO GLASS LINED AGITATOR VESSELS - SUPPORTS FOR DAVITED AND HINGED FLAT COVERS - LOCATING AND CONNECTING DIMENSIONS |
DIN 28137-2:2005-01 | Mounting flanges for agitation units - Part 2: Typ E for glass lined vessels |
DIN 28148:1992-01 | PTFE ENVELOPE GASKETS FOR GLASS LINED AGITATOR VESSELS |
DIN 28136-10 : 1978 | GLASS LINED VESSELS FOR AGITATORS, WITH A NOMINAL VOLUME OF 8000 LITERS, FOR REPLACEMENT PURPOSES |
DIN 28147:1985-04 | GLASS LINED THERMOPOCKETS FOR AGITATOR VESSELS - MOUNTING DIMENSIONS |
DIN 28014:1970-10 | ELLIPTICAL HEADS WITH LONG STRAIGHT FLANGE |
DIN 28139-2:1985-06 | WELDING NECKS FOR GLASS LINED VESSELS - FORM M MANHOLE, HANDHOLE AND ASSEMBLY OPENING FOR CLAMP SCREW CONNECTIONS - CONNECTING, DIMENSIONS |
DIN 28140-2:2005-01 | CONNECTIONS FOR BOTTOM DISCHARGE VALVES - PART 2: ON GLASS LINED STEEL - CONNECTING DIMENSIONS PN 10 |
DIN 28120:2004-06 | Circular sight glasses with case in main power connection |
DIN 28081-2:2015-06 | SUPPORTS FOR VESSELS - PART 2: STEEL PROFILE SUPPORTS FOR VESSELS |
DIN 28145-4:1993-12 | PARTS WELDED TO GLASS LINED AGITATOR VESSELS - SUPPORT RINGS |
DIN 28152-1:1999-11 | Clamps for glass lined vessels - Part 1: Dimensions, assignment |
DIN 28153-3 : 1983 | COVERS WITH CONNECTING NOZZLES FOR DN 200 TO 400 OPENINGS IN GLASS-LINED AGITATOR VESSELS |
DIN 28081-3:1985-09 | TYPE B TUBULAR VESSEL SUPPORTS - MAXIMUM PERMISSIBLE LOADS ON TUBULAR SUPPORTS FOR DISHED ENDS |
DIN 28139-3:1985-06 | WELDING NECKS FOR GLASS LINED VESSELS - FORM S NOZZLES FOR LAPPED DIVIDED FLANGE CONNECTIONS - CONNECTING DIMENSIONS |
DIN 28012:1970-10 | TOROSPHERICAL HEADS WITH LONG STRAIGHT FLANGE |
DIN 28013:2012-06 | ELLIPSOIDAL HEADS |
DIN 28136-1:2005-12 | AGITATOR VESSELS - PART 1: PRINCIPAL DIMENSIONS |
DIN 28121:2004-06 | Circular sight glasses with case in metal to metal contact type flanged joint |
DIN 28086:1994-06 | Lugs on vessels for use in process engineering - Dimensions and maximum safe working load |
DIN 28145-5:1995-11 | PARTS WELDED TO GLASS LINED STEEL AGITATOR VESSELS - PART 5: INSULATION COLLAR AT THE BOTTOM DISCHARGE OPENING |
DIN 28146:1998-06 | GLASS LINED STEEL BAFFLES FOR AGITATOR VESSELS - MOUNTING DIMENSIONS |
DIN 28145-3:1993-09 | PARTS WELDED TO GLASS LINED AGITATOR VESSELS - POSITION AND SIZE OF LIFTING LUGS |
DIN 28081-1:2015-06 | SUPPORTS FOR VESSELS - PART 1: TUBULAR SUPPORTS FOR VESSELS |
DIN 28149:1991-09 | PROTECTIVE SLEEVE FOR THERMOTIPS FOR AGITATOR VESSELS - CONNECTING DIMENSIONS |
DIN 28145-1:1999-11 | PARTS WELDED TO GLASS LINED STEEL AGITATOR VESSELS - PART 1: SUPPORT FOR BAFFLE FORM S FOR VESSELS NOMINAL DIAMETER 2400 TO 3600 MM - CONNECTING DIMENSIONS - INTERACTIVE FOR NEW DESIGN |
DIN 28150:1992-08 | DIVIDED LAPPED FLANGE FOR GLASS LINED WELDING NECKS - PN 10 |
DIN 28145-7:1987-11 | WELDED ATTACHMENTS FOR STEEL, GLASS-LINED AGITATOR VESSELS - BRACKET SUPPORTS WELDED TO JACKETS - DIMENSIONS, MAXIMUM PERMISSIBLE LOADS - STRESSES IN THE JACKET |
DIN 28151:1999-11 | Arrangement and size of jacket nozzles on glass-lined steel mixing vessels for use in process engineering |
DIN 28115:2003-02 | CARBON STEEL NOZZLES - PN 10 TO PN 40 |
DIN 28136-3:2005-12 | AGITATOR VESSELS - PART 3: POSITION AND SIZES OF COVER NOZZLES FOR GLASS LINED STEEL AGITATOR VESSELS |
DIN 28139-1:1985-06 | WELDING NECKS FOR GLASS LINED VESSELS - FORM H MAIN FLANGES FOR CLAMP SCREW CONNECTIONS - DIMENSIONS |
DIN 82101:2005-09 | Components for lifting, towing, lashing - Shackle, dee - Non-alloy quality steel |
DIN 28011:2012-06 | TOROSPHERICAL HEADS |
DIN 28130-3:1983-10 | AGITATOR VESSELS WITH AGITATION UNIT - AGITATOR DRIVE, TERMS COMPONENT COMBINATION, REVIEW |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.