DIN 40040:1987-04

Withdrawn

Withdrawn A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

APPLICABILITY CLASSES AND RELIABILITY FIGURES FOR COMPONENTS OF TELECOMMUNICATION AND ELECTRONICS

Available format(s):

Withdrawn date: 31-10-1993

Language(s):

Published date: 12-01-2013

Publisher: German Institute for Standardisation (Deutsches Institut für Normung)

Table of Contents - (Show below) - (Hide below)

1 Zweck
2 Begriffe und ergänzende Angaben
  2.1 Klima
      2.1.1 Bauelemente-Umgebungsklima
      2.1.2 Umgebungstemperatur
      2.1.3 Oberflächentemperatur
      2.1.4 Untere Transport- und Lager-Grenztemperatur
      2.1.5 Obere Transport- und Lager-Grenztemperatur
      2.1.6 Untere Grenztemperatur
      2.1.7 Obere Grenztemperatur
      2.1.8 Feuchte
  2.2 Begriffe der Zuverlässigkeit
      2.2.1 Bezugszuverlässigkeit
      2.2.2 Beanspruchungsdauer
      2.2.3 Ausfallsatz
      2.2.4 Ausfallquotient
  2.3 Anwendungsklässe
  2.4 Zuverlässigkeitsangaben
3 Bilden der Kurzzeichen für die Anwendungsklassen und
  für die Zuverlässigkeitsangaben
  3.1 Untere Grenztemperatur rimin (1. Stelle)
  3.2 Obere Grenztemperatur ümax (2. Stelle)
  3.3 Feuchtebeanspruchung (3. Stelle)
  3.4 Kurzzeichen für die Zuverlässigkeitsangabe
      (4. und 5. Stelle)
      3.4.1 Bezugszuverlässigkeit im Falle der Angabe
            des Ausfallquotienten und der Beanspruchungsdauer
      3.4.2 Bezugszuverlässigkeit im Falle der Angabe des
            Ausfallquotienten und der Beanspruchungszyklen
  3.5 Ergänzende Zuverlässigkeitsangaben
  3.6 Grenzwerte der mechanischen Beanspruchung (6. Stelle)
  3.7 Luftdruck (7. Stelle)
  3.8 Sonderbeanspruchung (8. Stelle)
4 Beispiele für das Bilden der Kurzzeichen
5 Angaben, die in den Einzelbestimmungen festgelegt
  werden müssen
Anhang A

General Product Information - (Show below) - (Hide below)

Document Type	Standard
ISBN
Pages
Published
Publisher	German Institute for Standardisation (Deutsches Institut für Normung)
Status	Withdrawn

Standards Referenced By This Book - (Show below) - (Hide below)

DIN VDE 0832 : 90 AMD 1 90	ROAD TRAFFIC SIGNAL SYSTEMS
DIN 57435-303 : 1984	ELECTRICAL RELAYS: STATIC MEASURING RELAYS
DIN 4000-56:1987-04	TABULAR LAYOUTS OF ARTICLE CHARACTERISTICS FOR SWITCHES AND SWITCHING DEVICES UP TO AC 1000 V AND DC 1200 V
VDE 0800-4 : 1986	TELECOMMUNICATIONS - ERECTION OF TELECOMMUNICATION LINES
DIN 4000-5:1984-02	TABULAR LAYOUTS OF ARTICLE CHARACTERISTICS FOR CAPACITORS
VDE 0800-9 : 1989	TELECOMMUNICATIONS - KU VALUES OF SAFETY RELEVANT COMPONENTS AND INSULATIONS
DIN 47414:1981-04	TELECOMMUNICATION CORD WITH STRANDED WIRES; PVC-INSULATION AND PVC OUTER COVERING, PAIRED CONDUCTORS, WATERPROOF
DIN 41309-2:1985-07	SMALL TRANSFORMERS AND CHOKES; STRIP-WOUND CUT CORES; TECHNICAL CONDITIONS OF DELIVERY FOR ONE PHASE APPLICATIONS; TYPE SM, SE, SU AND SG
VDE 0560-6 : 1986	CAPACITORS - CAPACITORS WITH NOMINAL POWERS UP TO 1,5 KVAR FOR INSTALLATIONS WITH DISCHARGE LAMPS, IN PARTICULAR WITH FLUORESCENT LAMPS
DIN 4000-69:1993-11	TABULAR LAYOUTS OF ARTICLE CHARACTERISTICS FOR HOLDERS FOR ELECTRICAL AND ELECTRONIC PURPOSES
VDI/VDE 2189 Blatt 3:1994-10	Three-level stepping controllers - Methods of evaluation the performance
DIN VDE 0661 : 1988	PORTABLE PROTECTIVE DEVICES INTENDED FOR AN INCREASE IN THE PROTECTION LEVEL FOR 230 V A.C. RATED VOLTAGE, 16 A RATED CURRENT, RATED RESIDUAL CURRENT I[DELTA N] <= 30 MA
VDI/VDE 3546 Blatt 1:1987-08	Design of process control rooms; general considerations
VDI/VDE 3546 Blatt 5:1991-09	Design of process control rooms; arrangements of monitors at operator stations
VDE 0804 : 1989 AMD 1 1992	TELECOMMUNICATIONS; ADDITIONAL REQUIREMENTS FOR CONSTRUCTION AND TESTING OF APPARATUS
VDE 0661 : 1988	PORTABLE PROTECTIVE DEVICES INTENDED FOR AN INCREASE IN THE PROTECTION LEVEL FOR 230 V A.C. RATED VOLTAGE, 16 A RATED CURRENT, RATED RESIDUAL CURRENT I[DELTA N] <= 30 MA
DIN 75001:1981-03	CLASSES OF APPLICATION FOR MEASURING DEVICES IN MOTOR VEHICLES
DIN 4713-1:1980-12	HEATING COSTS BASED ON CONSUMPTION, GENERALITIES, DEFINITIONS
VDE 0660-209 : 1988	SWITCHGEAR AND CONTROLGEAR; LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR; ADDITIONAL REQUIREMENTS FOR PROXIMITY POSITION SWITCHES FOR SAFETY FUNCTIONS
VDE 0832 : 1990	ROAD TRAFFIC SIGNAL SYSTEMS
DIN 50019-2:1963-07	TESTING OF MATERIALS, COMPONENTS AND EQUIPMENT; OPEN-AIR CLIMATES, CLIMATIC DATA
DIN 4000-70:1992-01	TABULAR LAYOUTS OF ARTICLE CHARACTERISTICS FOR CORE LAMINATIONS, CORES AND COIL FORMERS FOR SMALL TRANSFORMERS AND CHOKES
DIN 41309-3:1985-07	SMALL TRANSFORMERS AND CHOKES; STRIP-WOUND CUT CORES; TECHNICAL CONDITIONS OF DELIVERY FOR THREE PHASE APPLICATIONS; TYPE S3U
DIN VDE 0800-9 : 1989	TELECOMMUNICATIONS; KU-VALUES OF SAFETY RELEVANT COMPONENTS AND INSULATIONS
DIN 40041:1990-12	DEPENDABILITY; CONCEPTS
DIN 44080:1983-10	THERMISTORS - PTC, TECHNICAL TERMS AND TESTS
DIN 4713-3:1989-01	HEATING COSTS BASED ON CONSUMPTION, INSTRUMENTS, REGISTERING HEATING WATER CONSUMPTION, OPERATING WITH AUXILIARY ENERGY
VDE 0435-303 : 1984	ELECTRICAL RELAYS; STATIC MEASURING RELAYS (SMR)
DIN VDE 0800-4 : 1986	TELECOMMUNICATIONS - ERECTION OF TELECOMMUNICATION LINES
DIN VDE 0560-6 : 1986	CAPACITORS - CAPACITORS WITH NOMINAL POWERS UP TO 1,5 KVAR FOR INSTALLATIONS WITH DISCHARGE LAMPS, IN PARTICULAR WITH FLUORESCENT LAMPS
DIN VDE 0560-8 : 1988	CAPACITORS - MOTOR CAPACITORS
DIN 41302-2:1986-05	SMALL TRANSFORMERS AND CHOKES; LAMINATIONS; TECHNICAL TERMS OF DELIVERY
DIN 47467-6:1990-08 (Draft)	TELECOMMUNICATION CORD WITH PLASTIC INSULATION AND PVC-OUTER COVERING WITH STRANDED WIRE, 4 SINGLE CONDUCTORS, D-SHAPE, SPLASHPROOF, TAE/TSV-SYSTEM
DIN 4000-6:1984-02	TABULAR LAYOUTS OF ARTICLE CHARACTERISTICS FOR RESISTORS
VDE 0831 : 2006	ELECTRIC SIGNALLING SYSTEMS FOR RAILROADS
DIN VDE 0660-209 : 1988	SWITCH GEAR AND CONTROL GEAR; LOW VOLTAGE SWITCH GEAR AND CONTROL GEAR; ADDITIONAL REQUIREMENTS FOR PROXIMITY POSITION SWITCHES FOR SAFETY FUNCTIONS
DIN 5376:1974-11	REVOLUTION SPEED TRANSMITTERS FOR MECHANICAL ENGINEERING
DIN 4000-54:1987-02	Tabular layouts of article characteristics for connectors
DIN 44081:1980-06	THERMISTORS; PTC
DIN 44185:1980-04	FIXED WIREWOUND RESISTORS, TYPE 2 - TERMINOLOGY, CHARACTERISTICS, METHODS OF TEST AND APPLICATION

Standards Referencing This Book - (Show below) - (Hide below)

DIN 40050:1980-07	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES; PROTECTION OF ELECTRICAL EQUIPMENT AGAINST CONTACT, FOREIGN BODIES AND WATER

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart