DIN 40501-3:1985-06
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ALUMINIUM FOR ELECTRICAL PURPOSES; E-AL AND E-ALMgSiO.5 BARS AND SECTION; TECHNICAL DELIVERY CONDITIONS
Hardcopy , PDF
01-03-2005
English
12-01-2013
1 Anwendungsbereich
2 Bestellangaben
3 Eigenschaften
3.1 Zusammensetzung
3.2 Mechanische und elektrische Eigenschaften
4 Masse
5 Anforderungen
6 Prüfung
6.1 Prüfung der mechanischen Eigenschaften
6.2 Prüfung der elektrischen Eigenschaften
6.3 Prüfung der Oberflächenbeschaffenheit
6.4 Weitere Prüfungen
7 Bescheinigungen
Specifies technical delivery conditions that apply to E-Al and E-AlMgSiO,5 bars and sections.
| DocumentType |
Standard
|
| Pages |
4
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| IEC 60114:1959 | Corresponds |
| IEC 60105:1958 | Corresponds |
| IEC 60105:1958 | Identical |
| IEC 60114:1959 | Identical |
| DIN 59700:1986-08 | WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS; EXTRUDED SQUARE BARS; TOLERANCES ON DIMENSIONS AND FORMS |
| DIN 40501-1:1985-06 | ALUMINIUM FOR ELECTRICAL PURPOSES; E-Al PLATE, SHEET AND STRIP; TECHNICAL DELIVERY CONDITIONS |
| DIN 1798:1986-09 | WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS - DRAWN ROUND BARS - TOLERANCES ON DIMENSIONS AND FORMS |
| DIN 48841:1985-03 | LIGHTNING PROTECTION SYSTEM; CONNECTING- AND BRIDGING COMPONENTS |
| DIN 1770:1987-01 | WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS, EXTRUDED RECTANGULAR BARS - TOLERANCES ON DIMENSIONS AND FORMS, STATIC VALUES |
| DIN 1769:1986-09 | WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS - DRAWN RECTANGULAR BARS WITH SHARP EDGES - TOLERANCES ON DIMENSIONS AND FORMS, STATIC VALUES |
| DIN 40501-4:1973-08 | ALUMINIUM FOR ELECTRICAL ENGINEERING - WIRES OF PURE ALUMINIUM - TECHNICAL CONDITIONS OF DELIVERY |
| DIN 1799:1986-09 | WROUGHT ALUMINIUM AND ALUMINIUM ALLOY EXTRUDED ROUND BARS - DIMENSIONS, DIMENSIONAL DEVIATIONS AND FORM TOLERANCES |
| DIN 59701:1986-08 | WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS; EXTRUDED HEXAGONAL BARS; TOLERANCES ON DIMENSIONS AND FORMS |
| DIN 48801:1985-03 | LIGHTNING PROTECTION SYSTEMS; CONDUCTORS, SCREWS AND NUTS |
| DIN 1799:1986-09 | WROUGHT ALUMINIUM AND ALUMINIUM ALLOY EXTRUDED ROUND BARS - DIMENSIONS, DIMENSIONAL DEVIATIONS AND FORM TOLERANCES |
| DIN 1770:1987-01 | WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS, EXTRUDED RECTANGULAR BARS - TOLERANCES ON DIMENSIONS AND FORMS, STATIC VALUES |
| DIN 40501-1:1985-06 | ALUMINIUM FOR ELECTRICAL PURPOSES; E-Al PLATE, SHEET AND STRIP; TECHNICAL DELIVERY CONDITIONS |
| DIN 46433:1959-11 | RECTANGULAR WIRES AND RECTANGULAR BARS, DRAWN, WITH RADIUSED EDGES; DIMENSIONS |
| DIN 43670:1975-12 | ALUMINIUM BUS BARS; DESIGN FOR CONTINUOUS CURRENT |
| DIN 50049:1992-04 | METALLIC PRODUCTS; TYPES OF INSPECTION DOCUMENTS |
| DIN 1798:1986-09 | WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS - DRAWN ROUND BARS - TOLERANCES ON DIMENSIONS AND FORMS |
| DIN IEC 60468:1981-03 | METHOD OF MEASUREMENT OF RESISTIVITY OF METALLIC MATERIALS |
| DIN 40501-2:2005-03 | Aluminium for use in electrical engineering - Part 2: Tubes, rods, bars and sections - Technical delivery conditions |
| DIN 59701:1986-08 | WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS; EXTRUDED HEXAGONAL BARS; TOLERANCES ON DIMENSIONS AND FORMS |
| DIN 50145:1975-05 | TESTING OF METALLIC MATERIALS; TENSILE TEST |
| DIN 1796:1986-09 | WROUGHT ALUMINIUM AND ALUMINIUM ALLOY DRAWN SQUARE BARS WITH SHARP EDGES - DIMENSIONS, DIMENSIONAL DEVIATIONS AND FORM TOLERANCES |
| DIN 1797:1986-09 | WROUGHT ALUMINIUM AND ALUMINIUM ALLOY DRAWN HEXAGONAL BARS WITH SHARP EDGES - DIMENSIONS, DIMENSIONAL DEVIATIONS AND FORM TOLERANCES |
| DIN 40501-5:1980-05 | ALUMINIUM FOR ELECTRICAL PURPOSES; CONTINUOUS CAST AND ROLLED WIRE, TECHNICAL TERMS OF DELIVERY, DIMENSIONS |
| DIN 1769:1986-09 | WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS - DRAWN RECTANGULAR BARS WITH SHARP EDGES - TOLERANCES ON DIMENSIONS AND FORMS, STATIC VALUES |
| DIN 40501-4:1973-08 | ALUMINIUM FOR ELECTRICAL ENGINEERING - WIRES OF PURE ALUMINIUM - TECHNICAL CONDITIONS OF DELIVERY |
| DIN 50133-1:1972-12 | TESTING OF METALLIC MATERIALS; VICKERS HARDNESS TEST; RANGE HV 0,2 TO HV 100 |
| DIN 46424:1973-08 | Switchgear; Extruded Channel Sections of Aluminium for Busbars |
| DIN 1712-3:1976-12 | ALUMINIUM - HALF-FINISHED PRODUCTS |
| DIN 9713:1981-09 | ALUMINIUM AND WROUGHT ALUMINIUM ALLOY, EXTRUDED; CHANNEL SECTIONS - DIMENSIONS, STATIC VALUES |
| DIN 50351:1985-02 | TESTING OF METALLIC MATERIALS - BRINELL HARDNESS TEST |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.