DIN 4131:1991-11
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
STEEL RADIO TOWERS & MASTS
01-09-2008
12-01-2013
1 Anwendungsbereich
2 Begriff
3 Bautechnische Unterlagen
3.1 Allgemeines
3.2 Standsicherheitsnachweis
3.3 Zeichnungen
4 Werkstoffe
5 Einwirkungen
5.1 Allgemeines
5.2 Eigenlast
5.3 Vorspannkraft
5.4 Windlast
5.5 Verkehrslast
5.6 Eislast
5.7 Wärmeeinwirkung
5.8 Einwirkungen aus Antennen, Antennenzügen,
Energieleitungen und Gegengewichtssystemen
5.9 Lasten aus Bauzuständen
5.10 Änderungen der Stützbedingungen
6 Nachweise
6.1 Berechnungsgrundsätze
6.11 Nachweis der Tragsicherheit
6.12 Nachweis der Gebrauchstauglichkeit
6.13 Nachweis der Betriebsfestigkeit
6.14 Hinweise zur Berechnung von Fachwerken
6.2 Zusätzliche Regelungen für abgespannte Maste
6.2.1 Allgemeines
6.2.2 Zu untersuchende Windrichtungen
6.2.3 Näherungen bei verschieden geneigten
und verschieden langen Abspannseilen
eines Abspannsternes
6.3 Gründung
6.4 Einzelnachweise
6.4.1 Öffnungen in Hohlquerschnitten
6.4.2 Lagerung des Mastschaftes
7 Bauliche Durchbildung und Ausführung
7.1 Tragwerk
7.1.1 Allgemeines
7.1.2 Mindestdicke
7.1.3 Verbände
7.1.4 Schraubenverbindungen
7.2 Abspannungen
7.2.1 Allgemeines
7.2.2 Torsionszwängungen
7.2.3 Paralleldrahtbündel
7.2.4 Seilklemmen
7.2.5 Bolzen
7.2.6 Anschluss von Abspannseilen
7.3 Isolatoren und Schutzarmaturen
7.3.1 Allgemeines
7.3.2 Keramikisolatoren
7.3.3 Sicherheiten und Stückprüfungen
für Keramikisolatoren
7.3.4 Andere Isolatoren
7.4 Gründungen
7.4.1 Betonfundamente
7.4.2 Verankerung
7.4.3 Hilfsanker
7.5 Einrichtungen zum Begehen des Bauwerks,
Absturzsicherungen
7.5.1 Allgemeines
7.5.2 Steigleitern und Steigeisengänge
7.5.3 Absturzsicherung
7.5.4 Ruhebühnen
7.5.5 Geländer an Arbeitsbühnen und
Laufstegen
7.6 Öffnungen in Hohlmasten
7.7 Korrosionsschutz
7.7.1 Allgemeines
7.7.2 Beschichtungen und Überzüge
7.7.3 Korrosionsschutz von Abspannseilen
7.8 Blitzschutz- und Erdungsanlagen
7.9 Flugsicherung
7.10 Ausführungstoleranzen
7.11 Montagehilfen
8 Zustandsüberwachung
Anhang A Windlastannahmen
Zitierte Normen und andere Unterlagen
Änderungen
This standard is included in DIN Handbook 59 and 144.
DocumentType |
Standard
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Superseded
|
SupersededBy |
DIN 18800-7:2008-11 | STEEL STRUCTURES - PART 7: EXECUTION AND CONSTRUCTER'S QUALIFICATION |
VDI 3786 Blatt 2:2000-12 | Environmental meteorology - Meteorological measurements concerning questions of air pollution - Wind |
BS 8100-2:1986 | Lattice towers and masts Guide to the background and use of Part 1 \'Code of practice for loading\' |
DIN 50976:1989-05 | PROTECTION AGAINST CORROSION; HOT DIP GALVANIZING (GENERAL GALVANIZING); REQUIREMENTS AND TESTS |
DIN 8563-3:1985-10 | QUALITY ASSURANCE OF WELDING OPERATIONS; FUSION WELDED JOINTS IN STEEL (EXCEPT BEAM WELDED JOINTS); REQUIREMENTS, CLASSIFICATION |
DIN VDE 0185-1 : 1982 | LIGHTNING PROTECTION SYSTEM - GENERAL WITH REGARD TO INSTALLATION |
DIN 1045 : 1988 AMD 1 1996 | STRUCTURAL USE OF CONCRETE - DESIGN AND CONSTRUCTION |
DIN 4030-1:2008-06 | Assessment of water, soil and gases for their aggressiveness to concrete - Part 1: Principles and limiting values |
DIN 1142:1982-01 | WIRE ROPE GRIPS FOR ROPE TERMINATIONS TO MEET SAFETY REQUIREMENTS |
DIN 1055-5:2005-07 | ACTIONS ON STRUCTURES - PART 5: SNOWLOADS AND ICE LOADS |
DIN 2078:1990-05 | STEEL WIRE FOR WIRE ROPES |
DIN 55928-8:1994-07 | PROTECTION OF STEEL STRUCTURES FROM CORROSION BY ORGANIC AND METALLIC COATINGS - PART 8: PROTECTION OF SUPPORTING THIN-WALLED BUILDING COMPONENTS FROM CORROSION |
DIN 50978:1985-10 | TESTING OF METALLIC COATINGS; ADHERENCE OF HOT-DIP ZINC COATINGS |
DIN 18800-4:2008-11 | STEEL STRUCTURE - PART 4: STABILITY - ANALYSIS OF SAFETY AGAINST BUCKLING OF SHELLS |
DIN 55928-9:1991-05 | PROTECTION OF STEEL STRUCTURES FROM CORROSION BY ORGANIC AND METALLIC COATINGS - COATING MATERIALS - COMPOSITION OF BINDERS AND PIGMENTS |
DIN 55928-1:1991-05 | PROTECTION OF STEEL STRUCTURES FROM CORROSION BY ORGANIC AND METALLIC COATINGS; GENERAL, TERMS AND DEFINITIONS, CORROSIVE STRESSES |
DIN 1055-1:2002-06 | ACTION ON STRUCTURES - PART 1: DENSITIES AND WEIGHTS OF BUILDING MATERIALS, STRUCTURAL ELEMENTS AND STORED MATERIALS |
DIN 1055-2:2010-11 | Actions on structures - Part 2: Soil properties |
DIN 50981:1979-05 | MEASUREMENT OF COATING THICKNESS; MAGNETIC METHODS FOR MEASUREMENT OF THICKNESS OF NON-FERROMAGNETIC COATINGS ON FERROMAGNETIC MATERIAL |
DIN 24532:1981-05 | VERTICAL FIXED LADDERS MADE OF IRON |
DIN 55928-3:1991-05 | PROTECTION OF STEEL STRUCTURES FROM CORROSION BY ORGANIC AND METALLIC COATINGS; PLANNING OF CORROSION-PROTECTIVE WORK |
DIN 17140-1:1983-03 | WIRE ROD FOR COLD DRAWING - TECHNICAL DELIVERY CONDITIONS FOR BASIC STEEL AND UNALLOYED QUALITY STEELS |
DIN 55928-7:1991-05 | PROTECTION OF STEEL STRUCTURES FROM CORROSION BY ORGANIC AND METALLIC COATINGS; TECHNICAL RULES FOR REFERENCE AREAS |
DIN 55928-5:1991-05 | CORROSION PROTECTION OF STEEL STRUCTURES BY THE APPLICATION OF ORGANIC OR METALLIC COATINGS; COATING MATERIALS AND PROTECTIVE SYSTEMS |
DIN 55928-4:1991-05 | CORROSION PROTECTION OF STEEL STRUCTURES BY THE APPLICATION OF ORGANIC OR METALLIC COATINGS; PREPARATION AND TESTING OF SURFACES |
DIN 8565:1977-03 | ANTI-RUST OF STEEL-FRAMED STRUCTURES BY THERMAL SPRAYING OF ZINC AND ALUMINIUM; GENERAL SPECIFICATIONS |
DIN 1054:2010-12 | Subsoil - Verification of the safety of earthworks and foundations - Supplementary rules to DIN EN 1997-1 |
DIN 55928-6:1991-05 | PROTECTION OF STEEL STRUCTURES FROM CORROSION BY ORGANIC AND METALLIC COATINGS; WORKMANSHIP AND INSPECTION OF CORROSION-PROTECTIVE WORK |
DIN 18800-7:2008-11 | STEEL STRUCTURES - PART 7: EXECUTION AND CONSTRUCTER'S QUALIFICATION |
DIN 50976:1989-05 | PROTECTION AGAINST CORROSION; HOT DIP GALVANIZING (GENERAL GALVANIZING); REQUIREMENTS AND TESTS |
DIN 55928-2:1991-05 | CORROSION PROTECTION OF STEEL STRUCTURES BY THE APPLICATION OF ORGANIC OR METALLIC COATINGS; DESIGNING FOR THE PREVENTION OF CORROSION |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.