• There are no items in your cart

DIN 41611-5:1984-09

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

SOLDERLESS ELECTRICAL CONNECTIONS; PRESS-IN CONNECTIONS; TERMS, REQUIREMENTS, TESTS

Superseded date

01-09-1995

Published date

12-01-2013

1 Anwendungsbereich
2 Zweck
3 Begriffe
   3.1 Einpressverbindung
   3.2 Einpressstift
   3.3 Anschlussstift
   3.4 Einpressbereich
   3.5 Effektive Einpresslänge
   3.6 Gestapelte Leiterplatte
4 Bezeichnung
5 Kennwerte
   5.1 Klimatische Kennwerte
   5.2 Elektrische Kennwerte (Strombelastbarkeit)
6 Anforderungen für das Kurz-Prüfprogramm
   6.1 Einpressstift
   6.2 Leiterplatte
   6.3 Gestapelte Leiterplatte
   6.4 Metallisiertes Loch
   6.5 Einpressverbindung
7 Mass- und Prüfverfahren
   7.1 Mechanische Prüfung
   7.2 Elektrische Prüfung
8 Prüfprogramme
   8.1 Allgemeines
   8.2 Prüfprogramme für Einzelteile
   8.3 Kurz-Prüfprogramm
   8.4 Lang-Prüfprogramm

DocumentType
Standard
PublisherName
German Institute for Standardisation (Deutsches Institut für Normung)
Status
Superseded
SupersededBy

DIN 41612-7:1985-06 TWO-PART CONNECTORS FOR PRINTED BOARD, GRID 2,54 MM; DIMENSIONS OF TYPES U AND V
DIN 41652-7:1989-10 (Draft) RACK & PANEL CONNECTORS, TRAPEZOIDAL, ROUND CONTACTS DIAMETER 1 MM - DIMENSIONS OF TYPE E - PRESS-IN TECHNIQUE
DIN 41612-8:1987-10 TWO-PART CONNECTORS FOR PRINTED BOARDS, GRID 2,54 MM; DIMENSIONS OF TYPE M
DIN 41612-2:1987-10 TWO-PART CONNECTORS FOR PRINTED BOARDS; GRID 2,54 MM; DIMENSIONS OF TYPES B, C AND D
DIN 41612-9:1987-10 TWO-PART CONNECTORS FOR PRINTED BOARDS; GRIP 2,54 MM; DIMENSIONS OF TYPE E
DIN 43650-2:1983-07 PLUG CONNECTORS, SQUARE TYPE; RATINGS, REQUIREMENTS, TEST
DIN 41612-6:1990-06 TWO-PART CONNECTORS FOR PRINTED BOARD; GRID 2,54 MM; DIMENSIONS OF TYPES Q, R AND S
DIN 41612-3:1987-10 TWO-PART CONNECTORS FOR PRINTED BOARDS; GRID 2,54 MM; DIMENSIONS OF TYPES F AND G
DIN 41612-1:1988-01 TWO-PART CONNECTORS FOR PRINTED BOARD, GRID 2,54 MM; COMMON MOUNTING FEATURES, SURVEY OF TYPES
VDI/VDE 3546-4 : 1986 DESIGN OF CONTROL ROOMS; TECHNICAL EQUIPMENT FOR AUXILIARY ROOMS
DIN 41652-1:1990-06 RACK AND PANEL CONNECTORS, TRAPEZOIDAL, ROUND CONTACTS DIAMETER 1 MM; COMMON MOUNTING FEATURES AND DIMENSIONS, SURVEY OF TYPES
DIN 41612-4:1987-10 TWO-PART CONNECTORS FOR PRINTED BOARDS; GRID 2,54 MM; DIMENSIONS OF TYPE H
DIN VDE 0627 : 1986 CONNECTORS AND PLUG-AND SOCKET DEVICES - FOR RATED VOLTAGES UP 1000 V A.C., UP TO 1200 V D.C. AND RATED CURRENTS UP TO 500 A FOR EACH POLE

DIN 41640-4:1978-04 MEASURING METHODS AND TESTING PROCEDURES FOR ELECTROMECHANICAL COMPONENTS; TEST 2A: CONTACT RESISTANCE, MILLIVOLT LEVEL METHOD
DIN 40802-2:1976-02 METAL-CLAD BASE MATERIAL FOR PRINTED CIRCUITS; SPECIFICATIONS
DIN 41640-6:1978-04 MEASURING METHODS AND TESTING PROCEDURES FOR ELECTROMECHANICAL COMPONENTS; TEST 2C: VARIATION OF CONTACT RESISTANCE
DIN IEC 60068-1:1990-11 ELECTRICAL ENGINEERING - BASIC ENVIRONMENTAL TESTING PROCEDURES - GENERAL AND GUIDANCE
DIN 41611-2 : 1974 SOLDERLESS ELECTRICAL CONNECTIONS - WRAPPED CONNECTIONS TERMS, REQUIREMENTS, TEST METHODS
DIN 17663:1983-12 WROUGHT COPPER ALLOYS - COPPER-NICKEL-ZINC ALLOYS - (NICKEL SILVER) - COMPOSITION
DIN 17662:1983-12 WROUGHT COPPER ALLOYS - COPPER-TIN ALLOYS - (TIN BRONZE) - COMPOSITION
DIN 41640-3:1984-07 MEASURING METHODS AND TESTING PROCEDURES FOR ELECTROMECHANICAL COMPONENTS; TEST 5B: CURRENT TEMPERATURE DERATING
DIN 41611-4:1986-04 SOLDERLESS ELECTRICAL CONNECTIONS; CLIP CONNECTIONS; TERMINOLOGY, REQUIREMENTS, TESTING
DIN 40804:1977-08 TERMS AND DEFINITIONS FOR PRINTED CIRCUITS
DIN 41640-7:1978-04 MEASURING METHODS AND TESTING PROCEDURES FOR ELECTROMECHANICAL COMPONENTS; TEST 3A: INSULATION RESISTANCE
DIN 41611-1:1980-03 SOLDERLESS ELECTRICAL CONNECTIONS; TERMS AND DEFINITIONS, CLIMATIC TEST CATEGORIES, GENERAL MEASURING METHODS AND TESTING PROCEDURES
DIN 41640-2:1980-02 MEASURING METHODS AND TESTING PROCEDURES FOR ELECTROMECHANICAL COMPONENTS; TEST 1A: VISUAL EXAMINATION, TEST 1B: EXAMINATION OF DIMENSION AND MASS
DIN 50133-1:1972-12 TESTING OF METALLIC MATERIALS; VICKERS HARDNESS TEST; RANGE HV 0,2 TO HV 100
DIN 41611-6:1985-12 SOLDERLESS ELECTRICAL CONNECTIONS; INSULATION PIERCING CONNECTIONS; CONCEPTS, RATINGS, REQUIREMENTS, TESTING
DIN 41640-5:1978-04 MEASURING METHODS AND TESTING PROCEDURES FOR ELECTROMECHANICAL COMPONENTS; TEST 2B: CONTACT RESISTANCE, SPECIFIED TEST CURRENT METHOD

Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.