DIN 4226-3:1983-04
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
AGGREGATES FOR CONCRETE; TESTING OF HEAVY AND LIGHTWEIGHT AGGREGATES
Hardcopy , PDF
01-02-2002
English
12-01-2013
1 Field of application
2 Sampling
2.1 General
2.2 Quantity of sample
2.3 Procedure
3 General test methods
3.1 Granulometric composition
3.2 Particle shape
3.3 Bulk density
3.4 Apparent density of particles
3.4.1 Determination for aggregate conforming
to DIN 4226 Part 1
3.4.1.1 Measuring cylinder method
3.4.1.2 Pycnometer method for
aggregates with a maximum
particle size of not more
than 32 mm
3.4.1.3 Method for aggregates with
a maximum particle size
exceeding 32 mm
3.4.2 Determination for aggregates conforming
to DIN 4226 Part 2
3.4.2.1 Measuring cylinder method
3.4.2.2 Pycnometer method
3.5 Resistance to frost
3.5.1 General
3.5.2 Resistance to frost when the concrete
is moderately wet
3.5.3 Resistance to frost when the concrete
is extremely wet
3.6 Harmful constituents
3.6.1 Settleable solids
3.6.1.1 Settlement tests
3.6.1.2 Washing test
3.6.2 Organic matter
3.6.2.1 Testing with caustic soda
3.6.2.2 Expansive solids
3.6.3 Substances adversely affecting hardening
3.6.4 Sulfate and chloride
3.6.4.1 General
3.6.4.2 Preparation of specimens
3.6.4.3 Sulfate
3.6.4.4 Chloride
4 Additional test methods for aggregates conforming to
DIN 4226 Part 1
4.1 Strength
4.2 Alkali-soluble silicic acid
5 Additional test methods for determining the constancy
of volume of crushed blast-furnace lump slag
5.1 Lime disintegration (dicalcium silicate
disintegration)
5.2 Iron disintegration
6 Additional test methods for manufactured aggregates
conforming to DIN 4226 Part 2
6.1 Ignition loss
6.2 Constancy of volume
7 Additional test methods for aggregates conforming to
DIN 4226 Part 2 for light-weight concrete assigned to
strength categories LB 8 and above
7.1 Testing of the aggregate in concrete
7.1.1 Concrete composition
7.1.1.1 Concrete composition
according to constant
grading curve method
7.1.1.2 Concrete composition
according to particle size
fraction method
7.1.2 Procedure
7.2 Particle strength
Standards referred to and other documents
DocumentType |
Standard
|
Pages |
8
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
ISO 7033:1987 | Similar to |
DIN 1084-1 E : 1978 | CONTROL (QUALITY CONTROL) OF CONCRETE STRUCTURES AND REINFORCED CONCRETE STRUCTURES - CONCRETE B 2 ON BUILDING SITES |
DIN 4227-1 : 88 AMD 1 95 | PRESTRESSED CONCRETE - STRUCTURAL MEMBERS MADE OF ORDINARY CONCRETE, WITH CONCRETE TENSILE STRESSES OR WITH LIMITED CONCRETE TENSILE STRESSES |
DIN 1048-1:1991-06 | TESTING CONCRETE - TESTING OF FRESH CONCRETE |
DIN 1084-2:1978-12 | CONTROL (QUALITY CONTROL) OF CONCRETE STRUCTURES AND REINFORCED CONCRETE STRUCTURES - PRECAST COMPONENTS |
DIN 1084-3:1978-12 | CONTROL (QUALITY CONTROL) OF CONCRETE STRUCTURES AND REINFORCED CONCRETE STRUCTURES - READY-MIXED CONCRETE |
DIN 1084-1:1978-12 | CONTROL (QUALITY CONTROL) OF CONCRETE STRUCTURES AND REINFORCED CONCRETE STRUCTURES - CONCRETE B 2 ON BUILDING SITES |
DIN 1084-3 E : 1978 | CONTROL (QUALITY CONTROL) OF CONCRETE STRUCTURES AND REINFORCED CONCRETE STRUCTURES - READY-MIXED CONCRETE |
DIN 1053-1:1996-11 | MASONRY - PART 1: DESIGN AND CONSTRUCTION |
DIN 4226-2:1983-04 | AGGREGATES FOR MORTAR AND CONCRETE - PART 2: LIGHTWEIGHT AGGREGATES |
DIN 18035-3:1978-12 | SPORTS GROUNDS - DRAINAGE |
DIN 51290-1 E : 1991 | TESTING OF POLYMER CONCRETES (REACTION RESIN CONCRETES) FOR MECHANICAL ENGINEERING PURPOSES; TERMINOLOGY |
DIN 51043:1979-08 | Trass; Requirements, Tests |
DIN 1045 : 1988 AMD 1 1996 | STRUCTURAL USE OF CONCRETE - DESIGN AND CONSTRUCTION |
DIN 1084-2 E : 1978 | CONTROL (QUALITY CONTROL) OF CONCRETE STRUCTURES AND REINFORCED CONCRETE STRUCTURES - PRECAST COMPONENTS |
DIN 52170-1:1980-02 | Determination of composition of hardened concrete; general, terms, sampling, dry-bulk density |
DIN 51290-1:1991-05 | TESTING OF POLYMER CONCRETES (REACTION RESIN CONCRETES) FOR MECHANICAL ENGINEERING PURPOSES; TERMINOLOGY |
DIN 4924:1998-08 | SANDS AND GRAVELS FOR WELL CONSTRUCTION - REQUIREMENTS AND TESTING |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.