DIN 8063-5:1999-10
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
PIPE JOINTS AND COMPONENTS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) FOR PIPES UNDER PRESSURE - PART 5: GENERAL QUALITY REQUIREMENTS, TESTING
Hardcopy , PDF
01-09-2012
English
12-01-2013
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
3.1 Zeitstand-Innendruckfestigkeit
4 Werkstoff (Formstoff)
5 Anforderungen
5.1 Lieferzustand
5.2 Oberflächenbeschaffenheit
5.3 Masse und Grenzabmasse
5.4 Festigkeitseigenschaften beim
Zeitstand-Innendruckversuch
5.5 Wasseraufnahme
5.6 Veränderungen nach Wärmebehandlung
5.7 Vicat-Erweichungstemperatur
6 Prüfungen
6.1 Zeitpunkt der Prüfungen
6.2 Lieferzustand und Oberflächenbeschaffenheit
6.3 Masse und Grenzabmasse
6.4 Zeitstand-Innendruckversuch
6.5 Wasseraufnahme
6.6 Veränderungen nach Wärmebehandlung
6.7 Vicat-Erweichungstemperatur
6.8 Nachweis
Anhang A (informativ) Erläuterungen
Anhang B (informativ) Literaturhinweise
This standard is included in DIN Handbook 52. Specifies requirements (and the relevant methods of test) for pipe fittings and joint assemblies for use with unplasticized polyvinylchloride (PVC-U) pressure pipes, as specified in DIN 8063 Parts 2 to 4 and Parts 6 to 12.
| DocumentType |
Standard
|
| Pages |
12
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Withdrawn
|
| DIN 8063-7:1980-07 | PIPE JOINTS AND THEIR ELEMENTS OF UNPLASTICIZED POLYVINYLCHLORIDE (UNPLASTICIZED PVC) UNDER PRESSURE - TEES AND BRANCHES OF INJECTION MOULDED FOR COLD WELDING - DIMENSIONS |
| DIN 8063-9:1980-08 | PIPE JOINTS AND THEIR ELEMENTS FOR PIPES OF UNPLASTICIZED POLYVINYLCHLORIDE (UNPLASTICIZED PVC) UNDER PRESSURE - SOCKETS REDUCING OF INJECTION MOULDED FOR COLD WELDING - DIMENSIONS |
| DIN 8063-6:2002-06 | PIPE JOINTS AND COMPONENTS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) FOR PIPES UNDER PRESSURE - PART 6: INJECTION-MOULDED ELBOWS FOR SOLVENT CEMENTING - DIMENSIONS |
| DIN 16962-12:1999-10 | PIPE JOINTS AND COMPONENTS OF POLYPROPYLENE (PP) FOR PIPES UNDER PRESSURE, PP-H 100, PP-B 80 AND PP-R 80 - PART 12: FLANGE ADAPTERS, FLANGES, SEALING RINGS FOR SOCKET WELDING; DIMENSIONS |
| DIN 16963-11:1999-10 | PIPE JOINTS AND COMPONENTS OF POLYETHYLENE (PE) FOR PIPES UNDER PRESSURE, PE 80 AND PE 100 - PART 11: FLANGE ADAPTERS, FLANGES, SEALING RINGS FOR SOCKET WELDING - DIMENSIONS |
| DIN 8063-10:2002-06 | PIPE JOINTS AND COMPONENTS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) FOR PIPES UNDER PRESSURE - PART 10: WALL BRACKET ELBOWS - DIMENSIONS |
| DIN 8063-11:1980-07 | PIPE JOINTS AND PIPE FITTINGS FOR PIPES UNDER PRESSURE MADE OF UNPLASTICIZED POLYVINYLCHLORIDE (RIGID PVC); SOCKETS WITH PRIMARY ELEMENT OF COPPER-ZINC-ALLOY (BRASS) FOR BONDING; DIMENSIONS |
| DIN 53760:1977-08 | TESTING OF PLASTICS ARTICLES; PRACTICABILITY OF TESTING, CRITERIA FOR TESTING |
| DIN 8063-2:1980-07 | PIPE JOINTS AND THEIR ELEMENTS FOR PIPES OF UNPLASTICIZED POLYVINYLCHLORIDE (UNPLASTICIZED PVC) UNDER PRESSURE - BENDS OF INJECTION MOULDED FOR COLD WELDING - DIMENSIONS |
| DIN 8061 Beiblatt 1:1984-02 | UNPLASTICIZED POLYVINYLCHLORIDE PIPES - CHEMICAL RESISTANCE OF PIPES AND FITTINGS OF (PVC-U) |
| DIN 8063-8:2002-06 | PIPE JOINTS AND COMPONENTS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC U) FOR PIPES UNDER PRESSURE - PART 8: INJECTION-MOULDED SOCKETS, CAPS AND NIPPLES FOR SOLVENT CEMENTING - DIMENSIONS |
| DIN 8063-4:1983-09 | PIPE JOINTS AND THEIR ELEMENTS FOR PIPES OF UNPLASTICIZED POLYVINYLCHLORIDE (UNPLASTICIZED PVC) UNDER PRESSURE - BRUSHINGS, FLANGES, GASKETS - DIMENSIONS |
| DIN 8063-3:2002-06 | PIPE JOINTS AND COMPONENTS OF UNPLASTICIZED POLY(VINYLCHLORIDE) (PVC U) FOR PIPES UNDER PRESSURE - PART 3: UNIONS - DIMENSIONS |
| EN ISO 12162:2009 | Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient (ISO 12162:2009) |
| DIN 8063-10:2002-06 | PIPE JOINTS AND COMPONENTS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) FOR PIPES UNDER PRESSURE - PART 10: WALL BRACKET ELBOWS - DIMENSIONS |
| DIN 8063-4:1983-09 | PIPE JOINTS AND THEIR ELEMENTS FOR PIPES OF UNPLASTICIZED POLYVINYLCHLORIDE (UNPLASTICIZED PVC) UNDER PRESSURE - BRUSHINGS, FLANGES, GASKETS - DIMENSIONS |
| DIN 8063-1:1986-12 | PIPE JOINTS AND FITTINGS FOR UNPLASTICIZED POLYVINYL CHLORIDE (PVC-U) PRESSURE PIPELINES - SOCKET BENDS - DIMENSIONS |
| ISO 161-1:1996 | Thermoplastics pipes for the conveyance of fluids Nominal outside diameters and nominal pressures Part 1: Metric series |
| DIN 8061:2016-05 | UNPLASTICIZED POLYVINYL CHLORIDE (PVC-U) PIPES - GENERAL QUALITY REQUIREMENTS, TESTING |
| DIN 8063-7:1980-07 | PIPE JOINTS AND THEIR ELEMENTS OF UNPLASTICIZED POLYVINYLCHLORIDE (UNPLASTICIZED PVC) UNDER PRESSURE - TEES AND BRANCHES OF INJECTION MOULDED FOR COLD WELDING - DIMENSIONS |
| DIN 8063-9:1980-08 | PIPE JOINTS AND THEIR ELEMENTS FOR PIPES OF UNPLASTICIZED POLYVINYLCHLORIDE (UNPLASTICIZED PVC) UNDER PRESSURE - SOCKETS REDUCING OF INJECTION MOULDED FOR COLD WELDING - DIMENSIONS |
| EN 763 : 1994 | PLASTICS PIPING AND DUCTING SYSTEMS - INJECTION MOULDED THERMOPLASTICS FITTINGS - TEST METHOD FOR VISUALLY ASSESSING EFFECTS OF HEATING |
| ISO 12162:2009 | Thermoplastics materials for pipes and fittings for pressure applications Classification, designation and design coefficient |
| DIN EN 10204:2005-01 | Metallic products - Types of inspection documents; German version EN 10204:2004 |
| EN 727:1994 | Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST) |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| DIN 8063-3:2002-06 | PIPE JOINTS AND COMPONENTS OF UNPLASTICIZED POLY(VINYLCHLORIDE) (PVC U) FOR PIPES UNDER PRESSURE - PART 3: UNIONS - DIMENSIONS |
| ISO 306:2013 | Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST) |
| ISO 4065:1996 | Thermoplastics pipes Universal wall thickness table |
| DIN 8062:2009-10 | Unplasticized polyvinyl chloride (PVC-U) pipes - Dimensions |
| DIN 8063-6:2002-06 | PIPE JOINTS AND COMPONENTS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) FOR PIPES UNDER PRESSURE - PART 6: INJECTION-MOULDED ELBOWS FOR SOLVENT CEMENTING - DIMENSIONS |
| DIN EN ISO 12162:2010-04 | Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient (ISO 12162:2009) |
| EN 12107 : 1997 | PLASTICS PIPING SYSTEM - INJECTION MOULDED THERMOPLASTICS FITTINGS, VALVES AND ANCILLARY EQUIPMENT - DETERMINATION OF THE LONG-TERM HYDROSTATIC STRENGTH OF THERMOPLASTICS MATERIALS FOR INJECTION MOULDING OF PIPING COMPONENTS |
| EN ISO 306:2013 | Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013) |
| DIN 8063-8:2002-06 | PIPE JOINTS AND COMPONENTS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC U) FOR PIPES UNDER PRESSURE - PART 8: INJECTION-MOULDED SOCKETS, CAPS AND NIPPLES FOR SOLVENT CEMENTING - DIMENSIONS |
| DIN 8063-2:1980-07 | PIPE JOINTS AND THEIR ELEMENTS FOR PIPES OF UNPLASTICIZED POLYVINYLCHLORIDE (UNPLASTICIZED PVC) UNDER PRESSURE - BENDS OF INJECTION MOULDED FOR COLD WELDING - DIMENSIONS |
| DIN 7748-1:1985-09 | PLASTIC MOULDING MATERIALS; UNPLASTICIZED POLYVINYL CHLORIDE (PVC-U) MOULDING MATERIALS; CLASSIFICATION AND DESIGNATION |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.