DIN 9003-3:1994-08
Current
The latest, up-to-date edition.
AEROSPACE; BENDING OF LIGHT METAL SHEETS AND STRIPS - PART 3: BENDING RADII, DIRECTIONS FOR DESIGN
Hardcopy , PDF
German
01-01-1994
Kein Inhaltsverzeichnis in der Norm vorhanden.
Diese Norm ist für das Biegen bei Raumtemperatur längs und quer zur Walzrichtung von Blechen und Bändern aus Leichtmetallen anzuwenden. Sie gibt die Mindestbiegehalbmesser bei einem Biegewinkel von 90 grad an. Grössere als in dieser Norm festgelegte Biegehalbmesser sind nach DIN 250 bevorzugt anzuwenden.
DocumentType |
Standard
|
Pages |
4
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Current
|
DIN 9003-5:1986-12 | AEROSPACE; BENDING OF LIGHT METAL SHEET AND STRIP; DIMENSIONS, LIMIT DEVIATIONS AND COMPENSATION VALUES |
DIN 9003-6:1992-07 | AEROSPACE; BENDING OF SHEET AND STRIP; STOP-DRILL HOLES, CORNER CONFIGURATIONS |
WL 3.7114-1 : 1974 | TITANIUM ALLOY; TIAL5SN2; SHEETS, STRIPS AND PLATES |
WL 3.4377-1 : 2012 | AEROSPACE SERIES - WROUGHT ALUMINIUM ALLOY WITH APPROX. 5,7 ZN - 2,2 MG - 1,6 CU - 0,22 CR - PART 1: SHEET AND STRIP, CLAD |
WL 3.7064-1 : 1979 | TITANIUM, UNALLOYED, WITH ABOUT 0.3 O[2] - SHEETS |
WL 3.7024-100 : 1992 | AEROSPACE; TITANIUM WITH APPROX. 0,1 O; SHEET AND FILLER METAL FOR WELDING; DESIGN AND PRODUCTION DATA, CONVERSION |
WL 3.1354-1 : 1987 | AEROSPACE - WROUGHT ALUMINUM ALLOY WITH APPROX. 4,4CU-1,5MG-0,6MN - SHEET AND PLATE |
WL 3.7024-1 : 1990 | AEROSPACE; TITANIUM WITH APPROX. 0,1 O; SHEET |
WL 3.3524-100 : 1990 | AEROSPACE; WROUGHT ALUMINIUM ALLOY WITH APPROX. 2,5MG-0,25CR; SHEET, STRIP, INTERNAL PRESSURE TUBES AND TUBES FOR FLUIDS, SEAMLESS; DESIGN AND PRODUCTION DATA, CONVERSION |
WL 3.7164-1 : 1990 | AEROSPACE - TITANIUM ALLOY WITH APPROX. 6AL-4V - SHEET AND PLATE |
WL 3.1364-100 : 1987 | AEROSPACE; WROUGHT ALUMINIUM ALLOY WITH APPROX. 4,4CU-1,5MG-0,6MN; CLAD SHEET, STRIP AND PLATE, SHEET AND STRIP SECTIONS AND WEDGES; DESIGN AND PRODUCTION DATA, CONVERSION |
WL 3.1364-1 : 1987 | AEROSPACE; WROUGHT ALUMINIUM ALLOY WITH APPROX. 4,4CU-1,5MG-0,6MN; CLAD SHEET, STRIP AND PLATE |
WL 3.3214-1 : 1988 | AEROSPACE; WROUGHT ALUMINIUM ALLOY WITH APPROX. 1,0MG-06SI-0,3CU-0,20CR; SHEET AND PLATE |
WL 3.7124-100 : 1990 | AEROSPACE; TITANIUM ALLOY WITH APPROX. 2CU; SHEET, STRIP, BARS, FORGINGS AND FILLER METAL FOR WELDING; DESIGN AND PRODUCTION DATA, CONVERSION |
WL 3.7064-100 : 1992 | AEROSPACE; TITANIUM WITH APPROX. 0,3 O; SHEET, BARS AND FORGINGS; DESIGN AND PRODUCTION DATA |
LN 9003-2:1961-12 | Bending of sheets and strips of copper and copper alloys; bend radii, standard design drawing |
WL 3.4377-100 : 1988 | AEROSPACE; WROUGHT ALUMINIUM ALLOY WITH APPROX. 5,7ZN-2,2MG-1,6CU-0,22CR, CLAD SHEET AND STRIP; DESIGN AND PRODUCTION DATA, CONVERSION |
WL 3.7124-1 : 1990 | AEROSPACE; TITANIUM ALLOY WITH APPROX. 2CU; SHEET AND STRIPS |
DIN 9003-5:1986-12 | AEROSPACE; BENDING OF LIGHT METAL SHEET AND STRIP; DIMENSIONS, LIMIT DEVIATIONS AND COMPENSATION VALUES |
WL 3.3524-1 : 1983 | ALUMINIUM WROUGHT ALLOY WITH ABOUT 2,5MG-025CR; SHEETS AND STRIPS |
WL 3.4374-1 : 1988 | AEROSPACE; WROUGHT ALUMINIUM ALLOY WITH APPROX. 5,6ZN-2,5MG-1,6CU-0,23CR; CLAD SHEET |
DIN 9003-1:1984-10 | AEROSPACE; BENDING OF SHEETS, PLATES AND STRIPS OF STEEL AND HEAT- RESISTANT ALLOYS, BENDING RADII, DIRECTIONS FOR DESIGN |
WL 3.3214-100 : 1990 | AEROSPACE - WROUGHT ALUMINUM ALLOY WITH APPROX. 1,0MG-0,6SI-0,3CU-0,20CR - SHEET, PLATE, BARS, SECTIONS, DIE FORGINGS AND HAND FORGINGS, INTERNAL PRESSURE TUBES AND STRUCTURAL TUBES - DESIGN AND PRODUCTION DATA, CONVERSION |
DIN 9003-6:1992-07 | AEROSPACE; BENDING OF SHEET AND STRIP; STOP-DRILL HOLES, CORNER CONFIGURATIONS |
WL 3.7174-1 : 1973 | TITANIUM ALLOY; TIAL6V6SN2; SHEETS, STRIPS AND PLATES |
WL 3.4374-100 : 1990 | AEROSPACE; WROUGHT ALUMINIUM ALLOY WITH APPROX. 5,6ZN-2,5MG-1,6CU-0,23CR; SHEET AND TAPERED SHEET, CLAD; DESIGN AND PRODUCTION DATA, CONVERSION |
WL 3.7034-100 : 1992 | AEROSPACE; TITANIUM WITH APPROX. 0,2 O; SHEET, BARS, FORGINGS AND FILLER METAL FOR WELDING; DESIGN AND PRODUCTION DATA, CONVERSION |
WL 3.7034-1 : 1979 | TITANIUM, UNALLOYED, WITH ABOUT 0.2 O[2]; SHEETS |
WL 3.1354-100 : 1990 | AEROSPACE; WROUGHT ALUMINIUM ALLOY WITH APPROX. 4,4CU-1,5MG-0,6MN; SHEET, PLATE, BARS, EXTRUDED SECTIONS, STRUCTURAL TUBES; DESIGN AND PRODUCTION DATA, CONVERSION |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.