DIN CEN/TS 16811-3;DIN SPEC 30757:2016-08
Current
Current
The latest, up-to-date edition.
WINTER SERVICE EQUIPMENT AND PRODUCTS - DE-ICING AGENTS - PART 3: OTHER SOLID AND LIQUID DE-ICING AGENTS - REQUIREMENTS AND TEST METHODS
Available format(s)
Hardcopy , PDF
Language(s)
German
Published date
01-01-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.This standard is included in DIN Handbook 172-3.
| DevelopmentNote |
Also numbered as DIN SPEC 30757. (08/2016)
|
| DocumentType |
Standard
|
| Pages |
44
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| CEN/TS 16811-3:2015 | Identical |
| CEN/TS 15597-2:2012 | Winter maintenance equipment - Spreading machines (gritting machines) - Part 2: Requirements for distribution and its test |
| ISO 11130:2010 | Corrosion of metals and alloys Alternate immersion test in salt solution |
| ISO 9377-2:2000 | Water quality Determination of hydrocarbon oil index Part 2: Method using solvent extraction and gas chromatography |
| EN ISO 11885:2009 | Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) (ISO 11885:2007) |
| EN 573-5:2007 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 5: Codification of standardized wrought products |
| EN 27888:1993 | Water quality - Determination of electrical conductivity (ISO 7888:1985) |
| EN 573-2:1994 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 2: Chemical symbol based designation system |
| EN ISO 3104:1996 | Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994) |
| ISO 5815-1:2003 | Water quality Determination of biochemical oxygen demand after n days (BODn) Part 1: Dilution and seeding method with allylthiourea addition |
| EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
| PREN 16811-1 : DRAFT 2014 | WINTER SERVICE EQUIPMENT - DE-ICING AGENTS - PART 1: SODIUM CHLORIDE - REQUIREMENTS AND TEST METHODS |
| EN 13036-1:2010 | Road and airfield surface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique |
| ISO 565:1990 | Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings |
| EN 1484:1997 | Water analysis - Guidelines for the determination of total organic carbon (TOC) and dissolved organic carbon (DOC) |
| ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
| ISO 2591-1:1988 | Test sieving — Part 1: Methods using test sieves of woven wire cloth and perforated metal plate |
| ISO 12846:2012 | Water quality — Determination of mercury — Method using atomic absorption spectrometry (AAS) with and without enrichment |
| ISO 6060:1989 | Water quality — Determination of the chemical oxygen demand |
| ISO 11885:2007 | Water quality Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) |
| ISO 8397:1988 | Solid fertilizers and soil conditioners — Test sieving |
| PREN 16811-2 : DRAFT 2014 | WINTER MAINTENANCE EQUIPMENT - DE-ICING AGENTS - PART 2: CALCIUM CHLORIDE AND MAGNESIUM CHLORIDE - REQUIREMENTS AND TEST METHODS |
| ISO 1523:2002 | Determination of flash point — Closed cup equilibrium method |
| ISO 758:1976 | Liquid chemical products for industrial use — Determination of density at 20 degrees C |
| ISO 15705:2002 | Water quality Determination of the chemical oxygen demand index (ST-COD) Small-scale sealed-tube method |
| EN 14231:2003 | Natural stone test methods - Determination of the slip resistance by means of the pendulum tester |
| EN 10025-5:2004 | Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance |
| EN 15597-1:2009 | Winter maintenance equipment — Spreading machines (gritting machines) — Part 1: General requirements and definitions for spreading machines |
| EN 15144:2007 | Winter maintenance equipment - Terminology - Terms for winter maintenance |
| EN 1236:1995 | Fertilizers - Determination of bulk density (loose) (ISO 3944:1992 modified) |
| EN 15749:2009 | Fertilizers - Determination of sulfates content using three different methods |
| ISO 649-2:1981 | Laboratory glassware — Density hydrometers for general purposes — Part 2: Test methods and use |
| EN 573-3:2013 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products |
| EN 573-1:2004 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 1: Numerical designation system |
| ISO 2479:1972 | Sodium chloride for industrial use — Determination of matter insoluble in water or in acid and preparation of principal solutions for other determinations |
| EN ISO 9377-2:2000 | Water quality - Determination of hydrocarbon oil index - Part 2: Method using solvent extraction and gas chromatography (ISO 9377-2:2000) |
| EN 206:2013+A1:2016 | Concrete - Specification, performance, production and conformity |
| ISO 2480:1972 | Sodium chloride for industrial use — Determination of sulphate content — Barium sulphate gravimetric method |
| ISO 3944:1992 | Fertilizers — Determination of bulk density (loose) |
| EN ISO 1523:2002 | Determination of flash point - Closed cup equilibrium method (ISO 1523:2002) |
| EN 932-1:1996 | Tests for general properties of aggregates - Part 1: Methods for sampling |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.