DIN EN 1011-8:2016-03 (Draft)
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 8: WELDING OF CAST IRONS
Hardcopy , PDF
09-07-2020
German
01-01-2016
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviations and symbols
5 Provision for quality assurance requirements
6 Storage, handling and identification of parent metal
7 Fusion welding processes
8 Welding consumables
8.1 General
8.2 Supply, storage and handling
9 Equipment
9.1 General
9.2 Ancillary equipment
10 Fabrication
10.1 General
10.2 Butt welding
10.3 Fillet welding
11 Weld preparation
11.1 Joint welds
11.2 Finishing welds and repair welds
12 Positioning of parts to be welded
13 Pre-heat temperature and interpass temperature
14 Tack welds
15 Temporary attachments
16 Run-on plates and run-off plates
17 Arcing
18 Inter-run cleaning and inter-run treatment
19 Heat input
20 Welding procedure specification (WPS)
21 Traceability
22 Peening
23 Inspection and testing
24 Quality requirements
25 Correction of non-conformity
26 Distortion
27 Post weld heat treatment
28 Post weld cleaning
Annex A (normative) Quality requirements
Annex B (informative) Welding technology for cast iron
castings
Bibliography
This standard is included in DIN DVS HDBK 284 and DIN HDBK 454/3. Specifies the requirements for fusion welding of unalloyed and low-alloy cast iron castings produced in accordance with: - EN 1561, Founding - Grey cast irons; - EN 1562, Founding - Malleable cast irons; - EN 1563, Founding - Spheroidal graphite cast irons.
DevelopmentNote |
DRAFT 2016 issued in March 2016. (03/2016)
|
DocumentType |
Draft
|
Pages |
53
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Superseded
|
Standards | Relationship |
NS EN 1011-8 : 1ED 2004 | Identical |
UNE-EN 1011-8:2005 | Identical |
ONORM EN 1011-8 : 2005 | Identical |
NBN EN 1011-8 : 2005 | Identical |
UNI EN 1011-8 : 2006 | Identical |
I.S. EN 1011-8:2004 | Identical |
NF EN 1011-8 : 2005 | Identical |
BS EN 1011-8:2004 | Identical |
SN EN 1011-8 : 2005 | Identical |
EN 1011-8:2018 | Identical |
DIN HDBK 454 : 1999 | GUENSTIG IM PAKET: GIESSEREIWESEN TEILE 1, 2 UND 3 - STAHLGUSS UND GUSSEISEN |
DIN HDBK 454/3 : 1ED 2014 | GIESSEREIWESEN 3 - STAHLGUSS UND GUSSEISEN - WERKSTOFFE, SCHWEISSEN, ZUBEHOER |
DIN DVS HDBK 284 : 4ED 2014 | SCHWEISSTECHNIK 7 - SCHWEISSTECHNISCHE FERTIGUNG, SCHWEISSVERBINDUNGEN |
EN 440 : 1994 | WELDING CONSUMABLES - WIRE ELECTRODES AND DEPOSITS FOR GAS SHIELDED METAL ARC WELDING OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION |
EN 1011-1:2009 | Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding |
EN 1562:2012 | Founding - Malleable cast irons |
EN ISO 4063:2010 | Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01) |
EN 12536:2000 | Welding consumables - Rods for gas welding of non alloy and creep-resisting steels - Classification |
ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding |
EN 729-1 : 1994 | QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - GUIDELINES FOR SELECTION AND USE |
EN 1563:2011 | Founding - Spheroidal graphite cast irons |
EN ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004) |
EN ISO 1071:2015 | Welding consumables - Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron - Classification (ISO 1071:2015) |
EN 499 : 1994 | WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION |
EN 1668 : 1997 | WELDING CONSUMABLES - RODS, WIRES AND DEPOSITS FOR TUNGSTEN INERT GAS WELDING OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION |
ISO 9692-2:1998 | Welding and allied processes — Joint preparation — Part 2: Submerged arc welding of steels |
ISO 1071:2015 | Welding consumables Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron Classification |
EN 758 : 1997 | WELDING CONSUMABLES - TUBULAR COVERED ELECTRODES FOR METAL ARC WELDING WITH AND WITHOUT A GAS SHIELD OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION |
ISO 4063:2009 | Welding and allied processes — Nomenclature of processes and reference numbers |
EN 1561:2011 | Founding - Grey cast irons |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.