Skip to content
Please enter a keyword to search

  • DIN EN 10272:2016-10

    Current The latest, up-to-date edition.

    STAINLESS STEEL BARS FOR PRESSURE PURPOSES

    Available format(s):  Hardcopy, PDF

    Language(s):  German

    Published date:  01-01-2016

    Publisher:  German Institute for Standardisation (Deutsches Institut für Normung)

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Dimensions and tolerances on dimensions
    5 Calculation of mass
    6 Classification and designation
       6.1 Classification
       6.2 Designation
    7 Information to be supplied by the purchaser
       7.1 Mandatory information
       7.2 Options
    8 Requirements
       8.1 Steelmaking process
       8.2 Delivery condition
       8.3 Chemical composition
       8.4 Corrosion resistance
       8.5 Mechanical properties
       8.6 Surface quality
       8.7 Internal soundness
    9 Inspection
       9.1 Types of inspection and inspection documents
       9.2 Tests to be carried out
       9.3 Frequency of testing
       9.4 Re-tests, sorting and reprocessing
       9.5 Sampling and preparation of samples and test pieces
       9.6 Test methods
    10 Marking
    Annex A (informative) Guidelines for further treatment
                          (including heat treatment) in fabrication
    Annex B (informative) Preliminary reference data for the tensile
                          strength of austenitic-ferritic steels at
                          elevated temperatures
    Annex C (informative) Reference data of strength values for creep
                          rupture
    Annex ZA (informative) Relationship between this European Standard
                           and the Essential Requirements of EU Directive
                           97/23/EC
    Bibliography
    National Annex NA (informative) Bibliography

    Abstract - (Show below) - (Hide below)

    This standard is included in DIN Handbook 403 E, 403/2 E and 405 E. Describes the technical delivery conditions for hot and cold formed stainless steel bars for the construction of pressure equipment supplied in accordance with one of the process routes and surface finishes.

    General Product Information - (Show below) - (Hide below)

    Development Note Applies in conjunction with DIN EN 10021 issue 03-2007. (10/2016)
    Document Type Standard
    Publisher German Institute for Standardisation (Deutsches Institut für Normung)
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    DIN 16272:2004-07 PN 250 and PN 400 valves with shut-off test connection for pressure gauges
    DIN 21057-11:2015-07 (Draft) PIPE CLASSES FOR PROCESS PLANTS - PART 11: TECHNICAL DELIVERY CONDITIONS FOR PIPE COMPONENTS OF AUSTENITIC STAINLESS STEELS OF MATERIAL GROUP 8.1
    DIN 16282:2004-07 SIPHONS FOR PRESSURE GAUGES AND THEIR ACCESSORIES
    DIN 28017-4:2012-04 STATIONARY ACCESSES TO PROCESS APPARATUS - PART 4: SAFETY DEVICES AGAINST UNINTENTIONAL DESCENT
    DIN 16284:2004-07 Nipple connections for pressure gauges and their accessories
    DIN 16263:2004-07 PN 16 cocks with adjusting nut and male connection and test connection for pressure gauges
    DIN 3387-1:2008-11 Separable unthreaded pipe connections for metal gas pipes - Part 1: Connections for pipes with smooth ends
    KTA 3507 : 2014(R2017) FACTORY TESTS, POST-REPAIR TESTS AND CERTIFICATION OF SATISFACTORY PERFORMANCE IN SERVICE OF MODULES AND DEVICES FOR THE INSTRUMENTATION AND CONTROLS OF THE SAFETY SYSTEM
    KTA 3702 : 2014(R2017) EMERGENCY POWER GENERATING FACILITIES WITH DIESEL-GENERATOR UNITS IN NUCLEAR POWER PLANTS
    DIN 17440:2001-03 STAINLESS STEELS - TECHNICAL DELIVERY CONDITIONS FOR DRAWN WIRE
    DIN 16271:2004-07 PN 250 and PN 400 valves with test connection for pressure gauges
    DIN 16281:2004-07 SUPPORT FOR MEASURING INSTRUMENTS AND FITTINGS
    DIN 19207:2004-02 Measurement of fluid flow by means of pressure differential devices - Threaded pipe end and accessories
    DIN 16270:2004-07 PN 250 and PN 400 valves without test connection for pressure gauges
    KTA 3211.1 : 2015 PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS
    KTA 3204 : 2015
    DIN 16262:2004-07 PN 6 and PN 16 cocks with adjusting nut and male connection for pressure gauges
    KTA 3205.2 : 2015 COR 2016 COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS - PART 2: COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS FOR PRESSURE AND ACTIVITY-RETAINING COMPONENTS IN SYSTEMS OUTSIDE THE PRIMARY CIRCUIT

    Standards Referencing This Book - (Show below) - (Hide below)

    EN ISO 14284:2002 Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996)
    EN 10052:1993 Vocabulary of heat treatment terms for ferrous products
    EN ISO 6506-1:2014 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
    ISO 6506-1:2014 Metallic materials Brinell hardness test Part 1: Test method
    EN 10079:2007 Definition of steel products
    EN 10027-2:2015 DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
    CEN/TR 10261:2013 Iron and steel - European standards for the determination of chemical composition
    EN 10221:1995 Surface quality classes for hot-rolled bars and rods - Technical delivery conditions
    EN ISO 6892-1:2016 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
    EN ISO 377:2017 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017)
    ISO 6892-1:2016 Metallic materials Tensile testing Part 1: Method of test at room temperature
    EN 10168:2004 Steel products - Inspection documents - List of information and description
    ISO 148-1:2016 Metallic materials — Charpy pendulum impact test — Part 1: Test method
    EN 10308:2001 Non destructive testing - Ultrasonic testing of steel bars
    EN 10278:1999 Dimensions and tolerances of bright steel products
    EN 10060:2003 Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions
    EN 10021:2006 General technical delivery conditions for steel products
    ISO 3651-2:1998 Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid
    ISO 286-1:2010 Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits
    EN 10204:2004 Metallic products - Types of inspection documents
    EN ISO 6892-2:2011 Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011)
    EN ISO 3651-2 : 1998 DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID
    EN 10027-1:2016 Designation systems for steels - Part 1: Steel names
    ISO 6892-2:2011 Metallic materials Tensile testing Part 2: Method of test at elevated temperature
    EN 10020:2000 Definition and classification of grades of steel
    EN 10061:2003 Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions
    EN 10059:2003 Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions
    EN ISO 148-1:2016 Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016)
    PD 6525-1:1990 Elevated temperature properties for steels for pressure purposes. Stress rupture properties
    ISO 377:2017 Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
    ISO 14284:1996 Steel and iron — Sampling and preparation of samples for the determination of chemical composition
    EN 10088-1:2014 Stainless steels - Part 1: List of stainless steels
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective