DIN EN 12927-7:2005-06

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 7: INSPECTION, REPAIR AND MAINTENANCE

Available format(s): Hardcopy, PDF

Superseded date: 07-03-2021

Language(s): English

Published date: 01-01-2005

Publisher: German Institute for Standardisation (Deutsches Institut für Normung)

Table of Contents - (Show below) - (Hide below)

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
   4.1 Application of this standard
   4.2 Safety principles
5 Maintenance
   5.1 General
   5.2 Rope cleaning or dressing
   5.3 Relocation of track ropes and fixed grips
   5.4 End fixing
   5.5 Shortening of rope loops
   5.6 End fixing of towing cords
6 Inspection
   6.1 General
   6.2 Periodical inspection
   6.3 Extraordinary inspections
   6.4 Visual annual inspection
   6.5 Measurement
   6.6 Magnetic MRT inspection
   6.7 Ray inspection
   6.8 Interpretation
   6.9 Personnel requirements
   6.10 Inspection report
7 Repair
   7.1 General provisions
   7.2 Stranded rope
   7.3 Locked coil rope
8 Rope re-use
Annex A (informative) A-deviations
Annex ZA (informative) Relationship between this European
         Standard and the Essential Requirements of EU Directive
         2000/9/EC relating to cableway installations designed to
         carry persons

Abstract - (Show below) - (Hide below)

Defines the safety requirements applicable to maintaining, inspecting and repairing steel wire ropes and their related installations for passenger transportation by rope.

General Product Information - (Show below) - (Hide below)

Document Type	Standard
ISBN
Pages
Published
Publisher	German Institute for Standardisation (Deutsches Institut für Normung)
Status	Superseded

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
NF EN 12927-7 : 2004	Identical
UNE-EN 12927-7:2006	Identical
NBN EN 12927-7 : 2004	Identical
NEN EN 12927-7 : 2004	Identical
NS EN 12927-7 : 1ED 2005	Identical
I.S. EN 12927-7:2004	Identical
SN EN 12927-7 : 2005	Identical
UNI EN 12927-7 : 2005	Identical
BS EN 12927-7:2004	Identical
EN 12927-7 : 2004	Identical

Standards Referencing This Book - (Show below) - (Hide below)

EN 12397:2017	Safety requirements for cableway installations designed to carry persons - Operation
EN 12929-1:2015	Safety requirements for cableway installations designed to carry persons - General requirements - Part 1: Requirements for all installations
EN 12927-6 : 2004	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 6: DISCARD CRITERIA
EN 12385-2:2002+A1:2008	Steel wire ropes - Safety - Part 2: Definitions, designation and classification
EN 444:1994	Non-destructive testing - General principles for radiographic examination of metallic materials by X- and gamma-rays
EN 12930:2015	Safety requirements for cableway installations designed to carry persons - Calculations
EN 13223:2015	Safety requirements for cableway installations designed to carry persons - Drive systems and other mechanical equipment
PREN 1907 : DRAFT 2014	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - TERMINOLOGY
EN 12385-1:2002+A1:2008	Steel wire ropes - Safety - Part 1: General requirements
EN 12408:2004	Safety requirements for cableway installations designed to carry persons - Quality assurance
EN 12929-2:2015	Safety requirements for cableway installations designed to carry persons - General requirements - Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes
EN 12385-3:2004+A1:2008	Steel wire ropes - Safety - Part 3: Information for use and maintenance
PREN 13796-1 : DRAFT 2012	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOWHANGERS
EN 12927-1 : 2004	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 1: SELECTION CRITERIA FOR ROPES AND THEIR END FIXINGS
EN 1909:2017	Safety requirements for cableway installations designed to carry persons - Recovery and evacuation
PREN 13796-2 : DRAFT 2012	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 2: SLIPPING RESISTANCE TESTS FOR GRIPS
EN 12927-2 : 2004	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 2: SAFETY FACTORS
EN 12927-4 : 2004	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 4: END FIXINGS
EN 12927-3 : 2004	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 3: LONG SPLICING OF 6 STRAND HAULING, CARRYING HAULING AND TOWING ROPES
EN 1709:2004	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PRECOMMISSIONING INSPECTION, MAINTENANCE, OPERATIONAL INSPECTION AND CHECKS
EN 12927-5 : 2004	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 5: STORAGE, TRANSPORTATION, INSTALLATION AND TENSIONING
EN 13243:2015	Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems
EN 12927-8 : 2004	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 8: MAGNETIC ROPE TESTING (MRT)
EN 1908:2015	Safety requirements of cableway installations designed to carry persons - Tensioning devices
PREN 13796-3 : DRAFT 2012	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 3: FATIGUE TESTING

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Add To Cart

Product Format

Quantity

Buy now

Add to cart

Create account