Skip to content
Please enter a keyword to search

  • DIN EN 13000:2014-11

    Current The latest, up-to-date edition.

    CRANES - MOBILE CRANES

    Available format(s):  Hardcopy, PDF

    Language(s):  English, German

    Published date:  01-11-2014

    Publisher:  German Institute for Standardisation (Deutsches Institut für Normung)

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    National foreword
    Foreword
    Introduction
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Safety requirements and/or protective measures
    5 Verification
    6 Information for use
    7 Marking
    Annex A (normative) - Examples of mobile crane types
    Annex B.1 (informative) - Major parts of telescopic
              cranes
    Annex B.2 (informative) - Major parts of lattice boom
              cranes
    Annex C (normative) - List of hazards
    Annex D (normative) - Load effects of combined motions
    Annex E (normative) - Crane operator's seat dimensions
    Annex F (normative) - Rigid body stability: Load effects
            due to acceleration
    Annex G.1 (normative) - Noise test code for mobile cranes
    Annex G.2 (normative) - Noise measurement, test report
    Annex H (normative) - Limit values for structural and
            fine grain steel types
    Annex J.1 (normative) - Minimum requirements for
              specification of hoist/derrick gears
    Annex K.1 (normative) - Minimum requirements for the
              specification of lifting hooks
    Annex L (normative) - Proof of competence
    Annex M (normative) - Test of steering systems for
            off-road mobile cranes
    Annex N.1 (informative) - Wind speed as a function
              of elevation
    Annex P (normative) - Efficiency of sheave sets
    Annex Q (informative) - Manufacturer's sign
    Annex R (normative) - Certificate for wire rope,
            requirements
    Annex S (normative) - Certificate for chain,
            requirements
    Annex T (informative) - Test procedures:
            Selection of load cases
    Annex U (normative) - Test certificate
    Annex V (informative) - Additional information
            of the concept of the limiting and
            indicating device
    Annex W (informative) - Selection of a suitable
            set of crane standards for a given application
    Annex ZA (informative) - Relation between this
             European Standard and the Essential
             Requirements of EU Directive 2006/42/EC
    Bibliography

    Abstract - (Show below) - (Hide below)

    Pertains to the design, construction, installation of safety devices, information for use, maintenance and testing of mobile cranes as defined in ISO 4306-2.

    General Product Information - (Show below) - (Hide below)

    Committee TC 147
    Document Type Standard
    Publisher German Institute for Standardisation (Deutsches Institut für Normung)
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    VDI 2381 Blatt 2:2009-07 Final inspection of mobile cranes - Instructional form for experts
    VDI 3570:2013-08 Overload safeguards for cranes
    NASA STD 8719.9 : 2015 LIFTING STANDARD

    Standards Referencing This Book - (Show below) - (Hide below)

    DIN 15403:1969-12 LIFTING HOOKS FOR HOISTS; KNUCKLE THREADS
    EN 854:2015 Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification
    EN 294:1992/AC:1993 SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS
    IEC 61672-2:2013+AMD1:2017 CSV Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests
    ISO 4308-1:2003 Cranes and lifting appliances Selection of wire ropes Part 1: General
    ISO 11660-2:2015 Cranes Access, guards and restraints Part 2: Mobile cranes
    EN 894-3:2000+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators
    IEC 61000-6-4:2006+AMD1:2010 CSV ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
    EN 856:2015 Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification
    EN 13557:2003+A2:2008 Cranes - Controls and control stations
    EN 982:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
    ISO 4871:1996 Acoustics — Declaration and verification of noise emission values of machinery and equipment
    EN 1037:1995+A1:2008 Safety of machinery - Prevention of unexpected start-up
    ISO 5349-2:2001 Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 2: Practical guidance for measurement at the workplace
    ISO 11660-1:2008 Cranes — Access, guards and restraints — Part 1: General
    ISO 3744:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
    EN 547-2:1996+A1:2008 Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings
    EN ISO 6683:2008 Earth-moving machinery - Seat belts and seat belt anchorages - Performance requirements and tests (ISO 6683:2005)
    ISO 12480-1:1997 Cranes Safe use Part 1: General
    ISO 4306-1:2007 Cranes — Vocabulary — Part 1: General
    IEC 61310-2:2007 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
    ISO/TR 11688-1:1995 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
    EN 894-2:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays
    ISO 4310:2009 Cranes — Test code and procedures
    ISO 7096:2000 Earth-moving machinery Laboratory evaluation of operator seat vibration
    IEC 61000-6-2:2016 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
    ISO 3411:2007 Earth-moving machinery Physical dimensions of operators and minimum operator space envelope
    ISO 6683:2005 Earth-moving machinery Seat belts and seat belt anchorages Performance requirements and tests
    EN 61310-2:2008 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
    EN ISO 3411:2007 Earth-moving machinery - Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007)
    ISO 7250:1996 Basic human body measurements for technological design
    EN 14502-2:2005+A1:2008 Cranes - Equipment for the lifting of persons - Part 2: Elevating control stations
    EN 61672-2:2013/A1:2017 ELECTROACOUSTICS - SOUND LEVEL METERS - PART 2: PATTERN EVALUATION TESTS (IEC 61672-2:2013/A1:2017)
    ISO 13732-1:2006 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
    ISO 5353:1995 Earth-moving machinery, and tractors and machinery for agriculture and forestry Seat index point
    ISO 8566-2:2016 Cranes — Cabins and control stations — Part 2: Mobile cranes
    EN 811 : 1996 SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE LOWER LIMBS
    EN 349:1993+A1:2008 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
    ISO 13200:1995 Cranes Safety signs and hazard pictorials General principles
    EN 547-1:1996+A1:2008 Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery
    EN ISO 13850:2015 Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)
    ISO 4308-2:1988 Cranes and lifting appliances Selection of wire ropes Part 2: Mobile cranes Coefficient of utilization
    ISO 11662-1:1995 Mobile cranes — Experimental determination of crane performance — Part 1: Tipping loads and radii
    ISO 8686-1:2012 Cranes — Design principles for loads and load combinations — Part 1: General
    IEC 60204-32:2008 Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
    EN 13586:2004+A1:2008 Cranes - Access
    EN 1050 : 1996 SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT
    DIN 15401-1:1982-11 LIFTING HOOKS; SHANK HOOKS WITH A POINT; FORGINGS
    EN ISO 7731:2008 Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003)
    EN 614-1:2006+A1:2009 Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
    EN ISO 4014:2011 Hexagon head bolts - Product grades A and B (ISO 4014:2011)
    EN ISO 11688-2 : 2000 ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 2: INTRODUCTION TO THE PHYSICS OF LOW-NOISE DESIGN
    EN 10025-1:2004 Hot rolled products of structural steels - Part 1: General technical delivery conditions
    EN 12644-1:2001+A1:2008 Cranes - Information for use and testing - Part 1: Instructions
    ISO 7731:2003 Ergonomics Danger signals for public and work areas Auditory danger signals
    EN ISO 5349-2:2001/A1:2015 MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 2: PRACTICAL GUIDANCE FOR MEASUREMENT AT THE WORKPLACE (ISO 5349 2:2001/AMD 1:2015)
    ISO 7752-2:2011 Cranes — Control layout and characteristics — Part 2: Basic arrangement and requirements for mobile cranes
    ISO 3795:1989 Road vehicles, and tractors and machinery for agriculture and forestry — Determination of burning behaviour of interior materials
    EN ISO 13732-1:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
    EN 60204-32:2008 Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
    EN ISO 5353:1998 Earth-moving machinery, and tractors and machinery for agriculture and forestry - Seat index point (ISO 5353:1995)
    EN ISO 11201:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)
    EN 13001-2:2014 Crane safety - General design - Part 2: Load actions
    ISO 10973:1995 Cranes Spare parts manual
    EN 626-2:1996+A1:2008 Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures
    EN ISO 12100-1:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
    EN 61672-1:2013 Electroacoustics - Sound level meters - Part 1: Specifications
    ISO 4301-2:2009 Cranes Classification Part 2: Mobile cranes
    ISO 4309:2010 Cranes Wire ropes Care and maintenance, inspection and discard
    EN 61000-6-2:2005/corrigendum:2005 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005)
    EN ISO 5349-1 : 2001 MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS (ISO 5349-1:2001)
    ISO 4305:2014 Mobile cranes — Determination of stability
    EN ISO 3744:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
    EN 953:1997+A1:2009 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
    EN 842:1996+A1:2008 Safety of machinery - Visual danger signals - General requirements, design and testing
    EN 61000-6-4:2007/A1:2011 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
    EN ISO 6385:2016 ERGONOMIC PRINCIPLES IN THE DESIGN OF WORK SYSTEMS (ISO 6385:2016)
    ISO 8087:1985 Mobile cranes Drum and sheave sizes
    ISO 13849-2:2012 Safety of machinery — Safety-related parts of control systems — Part 2: Validation
    ISO 12100-2:2003 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
    ISO 6309:1987 Fire protection — Safety signs
    EN ISO 12100-2:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
    EN 10025-2:2004/AC:2005 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
    ISO 7296-2:1996 Cranes Graphical symbols Part 2: Mobile cranes
    IEC 61000-6-4:2006+AMD1:2010 CSV Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
    ISO 2631-1:1997 Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements
    ISO 3864-1:2011 Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings
    EN ISO 13849-2:2012 Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012)
    ISO 261:1998 ISO general purpose metric screw threads General plan
    DIN 15400:1990-06 LIFTING HOOKS - MATERIALS, MECHANICAL PROPERTIES, LIFTING CAPACITY AND STRESSES
    EN 983:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
    EN 10025-6:2004+A1:2009 Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
    EN 954-1 : 1996 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
    ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
    EN ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
    ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
    EN ISO 4871:2009 Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
    IEC 61310-1:2007 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
    EN ISO 7250 : 1997 BASIC HUMAN BODY MEASUREMENTS FOR TECHNOLOGICAL DESIGN
    ISO 5349-1:2001 Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements
    EN 626-1:1994+A1:2008 Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers
    DIN 15061-2:1977-08 CRANES; GROOVE PROFILES FOR WIRE ROPE DRUMS
    DIN 15401-2:1983-09 LIFTING HOOKS FOR LIFTING APPLIANCES - SINGLE HOOKS - FINISHED PARTS WITH THREADED SHANK
    EN 1005-3:2002+A1:2008 Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation
    EN 853:2015 Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification
    ISO 7000:2014 Graphical symbols for use on equipment Registered symbols
    ISO 4301-1:2016 Cranes — Classification — Part 1: General
    EN ISO 11688-1:2009 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
    ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
    EN 10025-3:2004 Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
    EN 61310-1:2008 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
    IEC 61000-6-2 : 3.0:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
    ISO 12482-1:1995 Cranes Condition monitoring Part 1: General
    ISO 4306-2:1994 Cranes — Vocabulary — Part 2: Mobile cranes
    ISO 6385:2016 Ergonomics principles in the design of work systems
    ISO 11201:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
    EN 2:1992/A1:2004 CLASSIFICATION OF FIRES
    1987/404/EEC : 1987 COUNCIL DIRECTIVE OF 25 JUNE 1987 ON THE HARMONIZATION OF THE LAWS OF THE MEMBER STATES RELATING TO SIMPLE PRESSURE VESSELS
    EN ISO 7096:2008/AC:2009 EARTH-MOVING MACHINERY - LABORATORY EVALUATION OF OPERATOR SEAT VIBRATION
    ISO 4014:2011 Hexagon head bolts Product grades A and B
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective