DIN EN 13218:2002-09

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View superseded by

MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES

Available format(s): Hardcopy, PDF

Superseded date: 01-06-2016

Language(s): English

Published date: 01-01-2002

Publisher: German Institute for Standardisation (Deutsches Institut für Normung)

Table of Contents - (Show below) - (Hide below)

National foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or protective measures
6 Verification of the safety requirements and/or measures
7 Information for use
Annex A (normative) - Abrasive product guards,
         workzone enclosures and their combinations on
         stationary grinding machines
Annex B (normative) - Clamping methods for abrasive
         products and safety requirements for tool
         holding devices
Annex C (informative) - Calculation of the clamping
         force and the tightening torque for the
         mounting of abrasive products by means of flanges
Annex D (informative) - Noise reduction
Annex E (normative) - Noise emission determination,
         declaration and verification
Annex F (normative) - Requirements for grinding machines
         for the machining of materials
         generating flammable and explosive dusts
Annex G (informative) - Relevant and special clauses
         for different types of stationary grinding
         machines
Annex ZA (informative) - Relationship between this
         European Standard and the Essential
         Requirements of EU Directives 98/37/EC
         amended by Directive 98/79/EC, 89/336/EEC and
         73/23/EEC
Annex ZB (informative) - Relationship between this
         European Standard and the Essential
         Requirements of EU Directive 2006/42/EC
Bibliography

Abstract - (Show below) - (Hide below)

Defines the technical safety requirements and/or protective measures to be adopted by persons undertaking the design, construction and supply (including installation and dismantling, arrangements for transport and maintenance) of stationary grinding machines as defined in 3.1 and 3.2 and intended to be used for the grinding of workpieces of cold metal.

General Product Information - (Show below) - (Hide below)

Document Type	Standard
ISBN
Pages
Published
Publisher	German Institute for Standardisation (Deutsches Institut für Normung)
Status	Superseded
Superseded By	DIN EN ISO 16089 E : 2016

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
UNI EN 13218 : 2008	Identical
BS EN 13218 : 2002	Identical
UNE-EN 13218:2003	Identical
NS EN 13218 : 2002 AC 2010	Identical
NF EN 13218 : 2002 + A1 2008	Identical
SN EN 13218 : 2002 CORR 2010	Identical
NEN EN 13218 : 2002 + A1/C2 2010	Identical
I.S. EN 13218:2002	Identical
EN 13218:2002+A1:2008/AC:2010	Identical
NBN EN 13218 : 2002 COR 2010	Identical

Standards Referencing This Book - (Show below) - (Hide below)

EN 13236:2010+A1:2015	Safety requirements for superabrasive products
EN 12096:1997	Mechanical vibration - Declaration and verification of vibration emission values
EN 294:1992/AC:1993	SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS
ISO 11202:2010	Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
EN 1127-1:2011	Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
EN ISO 11204:2010	Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010)
ISO 2553:2013	Welding and allied processes Symbolic representation on drawings Welded joints
EN 418 : 1992	SAFETY OF MACHINERY - EMERGENCY STOP EQUIPMENT, FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN
EN 982:1996+A1:2008	Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
ISO 4871:1996	Acoustics — Declaration and verification of noise emission values of machinery and equipment
EN 1037:1995+A1:2008	Safety of machinery - Prevention of unexpected start-up
ISO 3744:2010	Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
EN 547-2:1996+A1:2008	Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings
EN 12413:2007+A1:2011	Safety requirements for bonded abrasive products
EN 1088:1995+A2:2008	Safety of machinery - Interlocking devices associated with guards - Principles for design and selection
EN 288-1:1992/A1:1997	SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES FOR FUSION WELDING
IEC 61310-2:2007	Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
ISO/TR 11688-1:1995	Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
EN 61310-2:2008	Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
ISO 3574:2012	Cold-reduced carbon steel sheet of commercial and drawing qualities
ISO 1083:2004	Spheroidal graphite cast irons - Classification
EN 1837:1999+A1:2009	Safety of machinery - Integral lighting of machines
EN 349:1993+A1:2008	Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
EN 13478:2001+A1:2008	Safety of machinery - Fire prevention and protection
IEC 60204-1:2016	Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN 547-1:1996+A1:2008	Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery
ISO 11689:1996	Acoustics — Procedure for the comparison of noise-emission data for machinery and equipment
EN 1033 : 1995	HAND-ARM VIBRATION - LABORATORY MEASUREMENT OF VIBRATION AT THE GRIP SURFACE OF HAND-GUIDED MACHINERY - GENERAL
EN 10025:1990/A1:1993	HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS
EN 1050 : 1996	SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT
EN 614-1:2006+A1:2009	Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
ISO 1052:1982	Steels for general engineering purposes
CR 1030-1 : 1995	HAND-ARM VIBRATION - GUIDELINES FOR VIBRATION HAZARDS REDUCTION - PART 1: ENGINEERING METHODS BY DESIGN OF MACHINERY
ISO 6103:2014	Bonded abrasive products Permissible unbalances of grinding wheels as delivered Static testing
ISO 5817:2014	Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections
EN ISO 11201:2010	Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)
EN 287-2:1992/A1:1997	APPROVAL TESTING OF WELDERS - FUSION WELDING - ALUMINIUM AND ALUMINIUM ALLOYS
ISO 3746:2010	Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane
EN 50081-2:1993	Electromagnetic compatibility - Generic emission standard - Part 2: Industrial environment
EN ISO 12100-1:2003/A1:2009	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
EN 729-1 : 1994	QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - GUIDELINES FOR SELECTION AND USE
EN ISO 3746:2010	Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)
ISO 6361-2:2014	Wrought aluminium and aluminium alloys Sheets, strips and plates Part 2: Mechanical properties
EN ISO 3744:2010	Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
EN 22553:1994	Welded, brazed and soldered joints - Symbolic representation on drawings (ISO 2553:1992)
EN 953:1997+A1:2009	Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
ISO 666:2012	Machine tools — Mounting of grinding wheels by means of hub flanges
ISO 12100-2:2003	Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
EN ISO 12100-2:2003/A1:2009	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
ISO 4997:2015	Cold-reduced carbon steel sheet of structural quality
EN 10130:2006	Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions
ENV 26385 : 1990	ERGONOMIC PRINCIPLES OF THE DESIGN OF WORK SYSTEMS
EN 983:1996+A1:2008	Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
EN 954-1 : 1996	SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
ISO 12100-1:2003	Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
EN 50082-2 : 95 AC 95	ELECTROMAGNETIC COMPATIBILITY - GENERIC IMMUNITY STANDARD - INDUSTRIAL ENVIRONMENT
EN ISO 4871:2009	Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
EN 626-1:1994+A1:2008	Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers
EN ISO 11688-1:2009	Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
ISO 6316:2012	Hot-rolled steel strip of structural quality
EN ISO 11202:2010	Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)
ISO 6385:2016	Ergonomics principles in the design of work systems
ISO 3522:2007	Aluminium and aluminium alloys Castings Chemical composition and mechanical properties
EN 1070 : 1998	SAFETY OF MACHINERY - TERMINOLOGY
ISO 11201:2010	Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
ISO 11204:2010	Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
EN 25817 : 1992	ARC WELDED JOINTS IN STEEL - GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS
ISO 230-5:2000	Test code for machine tools Part 5: Determination of the noise emission
EN 60204-1 : 2006 COR 2010	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
EN 287-1:2011	Qualification test of welders - Fusion welding - Part 1: Steels

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Add To Cart

Product Format

Quantity

Buy now

Add to cart

Create account