DIN EN 13241-1:2011-06
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - PRODUCT STANDARD - PART 1: PRODUCTS WITHOUT FIRE RESISTANCE OR SMOKE CONTROL CHARACTERISTICS
Hardcopy , PDF
01-12-2016
01-01-2011
Foreword
Introduction
1 Scope
1.1 General
1.2 Exclusions
1.3 Specific applications
2 Normative references
3 Terms and definitions
4 Requirements
4.1 Mechanical aspects
4.1.1 Force for manual operation
4.1.2 Mechanical resistance
4.1.3 Mechanical durability
4.1.4 Geometry of glazing/glass components
4.1.5 Protection against cutting
4.1.6 Protection against tripping
4.1.7 Safe openings
4.1.8 Release of dangerous substances
4.2 Power operation
4.2.1 Protection against crushing, shearing and drawing-in
4.2.2 Operating forces
4.2.3 Electrical safety
4.2.4 Electromagnetic compatibility (EMC)
4.2.5 Alternative requirements
4.2.6 Upgrading of manually operated doors
4.3 Additional requirements for specific performance characteristics
4.3.1 Water tightness
4.3.2 Resistance to wind load
4.3.3 Noise
4.3.4 Thermal resistance
4.3.5 Air permeability
4.3.6 Durability of the performance characteristics
4.4 Instructions for installation, operation and maintenance
5 Marking and labelling
6 Evaluation of conformity
6.1 General
6.2 Initial type test
6.3 Test on site
6.4 Production control
Annex A (informative) Form for designation and classification
of performances
Annex B (normative) Procedure for the determination of values for
thermal resistance
B.1 Introduction
B.2 Procedure
Annex C (informative) Safety factors to be considered in door
design in respect of their resistance to wind load
Annex ZA (informative) Relationship of this European Standard with
the Construction Products Directive
ZA.1 Clauses of this European Standard addressing the provisions
of EU Construction Products Directive
ZA.2 Procedures for the attestation of conformity of industrial,
commercial and garage doors and gates
ZA.2.1 General
ZA.2.2 Procedure according to system 3
ZA.3 CE-marking and labelling
Annex ZB (informative) Relationship of this European Standard with
the Machinery Directive
Annex ZC (informative) Relationship of this European Standard with
the EMC Directive
Bibliography
This standard is included in DIN Handbook 297 and 300/4.
DevelopmentNote |
Supersedes DIN EN 13241:DRAFT 1998. (04/2004) Supersedes DIN 18073. (05/2008)
|
DocumentType |
Standard
|
Pages |
30
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
NS EN 13241-1 : 2003 + A1 2011 | Identical |
NF EN 13241-1 : 2004 + A2 2016 | Identical |
I.S. EN 13241-1:2003 | Identical |
EN 13241-1:2003+A1:2011 | Identical |
NEN EN 13241-1 : 2003 + A2 2016 | Identical |
UNE-EN 13241-1:2004 | Identical |
BS EN 13241-1 : 2003 | Identical |
UNI EN 13241-1 : 2011 | Identical |
NBN EN 13241-1 : 2003 + A1 2011 | Identical |
SN EN 13241-1 : 2003 + A1 2011 | Identical |
DIN HDBK 297 : 5ED 2014 | FEUERWEHRWESEN - BAULICHE ANLAGEN, EINRICHTUNGEN, ORGANISATORISCHER BRANDSCHUTZ |
DIN HDBK 300/4 : 1ED 2011 | |
DIN 18320:2016-09 | GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - LANDSCAPE WORKS |
DIN 4108-4:2016-07 (Draft) | THERMAL INSULATION AND ENERGY ECONOMY IN BUILDINGS - PART 4: HYGROTHERMAL DESIGN VALUES |
EN 12489:2000 | Industrial, commercial and garage doors and gates - Resistance to water penetration - Test method |
EN 418 : 1992 | SAFETY OF MACHINERY - EMERGENCY STOP EQUIPMENT, FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN |
EN 1037:1995+A1:2008 | Safety of machinery - Prevention of unexpected start-up |
EN 61000-6-3:2007/A1:2011/AC:2012 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS (IEC 61000-6-3:2006/A1:2010) |
EN 12605:2000 | Industrial, commercial and garage doors and gates - Mechanical aspects - Test methods |
EN 12433-1:1999 | Industrial, commercial and garage doors and gates - Terminology - Part 1: Types of doors |
IEC 61000-6-2:2016 | Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
EN 12635:2002+A1:2008 | Industrial, commercial and garage doors and gates - Installation and use |
EN 12978:2003+A1:2009 | Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods |
ISO 140-3:1995 | Acoustics — Measurement of sound insulation in buildings and of building elements — Part 3: Laboratory measurements of airborne sound insulation of building elements |
EN 12428:2013 | Industrial, commercial and garage doors - Thermal transmittance - Requirements for the calculation |
EN 12426:2000 | Industrial, commercial and garage doors and gates - Air permeability - Classification |
EN 12445:2000 | Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Test methods |
IEC 61000-6-3:2006+AMD1:2010 CSV | Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
ISO 12567-1:2010 | Thermal performance of windows and doors Determination of thermal transmittance by the hot-box method Part 1: Complete windows and doors |
EN 12433-2:1999 | Industrial, commercial and garage doors and gates - Terminology - Part 2: Parts of doors |
EN 61000-6-2:2005/corrigendum:2005 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005) |
EN 12444:2000 | Industrial, commercial and garage doors and gates - Resistance to wind load - Testing and calculation |
ENV 1991-2-4 : 1995 | EUROCODE 1: BASIS OF DESIGN AND ACTIONS ON STRUCTURES - ACTIONS ON STRUCTURES - WIND ACTIONS (TOGETHER WITH UNITED KINGDOM NATIONAL APPLICATION DOCUMENT) |
EN 12427:2000 | Industrial, commercial and garage doors and gates - Air permeability - Test method |
ISO 717-1:2013 | Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation |
EN 12424:2000 | Industrial, commercial and garage doors and gates - Resistance to wind load - Classification |
EN 12425:2000 | Industrial, commercial and garage doors and gates - Resistance to water penetration - Classification |
EN 12604:2017 | Industrial, commercial and garage doors and gates - Mechanical aspects - Requirements and test methods |
EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.