Skip to content
Please enter a keyword to search

  • DIN EN 14398-2:2008-11

    Current The latest, up-to-date edition.

    CRYOGENIC VESSELS - LARGE TRANSPORTABLE NON-VACUUM INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  01-01-2008

    Publisher:  German Institute for Standardisation (Deutsches Institut für Normung)

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Vorwort
    1 Anwendungsbereich
    2 Normative Verweisungen
    3 Begriffe und Symbole
      3.1 Begriffe
      3.2 Symbole
    4 Bemessung
      4.1 Möglichkeiten für den Nachweis der Bemessung
      4.2 Allgemeine Anforderungen für die Bemessung
      4.3 Rechnerischer Nachweis
    5 Herstellung
      5.1 Allgemeines
      5.2 Schneiden
      5.3 Kaltumformen
      5.4 Warmumformen
      5.5 Fertigungstoleranzen
      5.6 Schweissen
      5.7 Andere Verbindungen als Schweissverbindungen
    6 Prüfung
      6.1 Prüfplan
      6.2 Probeplatten für die Arbeitsprüfungen
      6.3 Zerstörungsfreie Prüfungen
      6.4 Ausbesserung von Fehlern
      6.5 Druckprüfungen
    Anhang A (informativ) Elastische Spannungsanalyse
           A.1 Allgemeines
           A.2 Begriffe
           A.3 Grenzwert für die allgemeine Membranspannung
               durch Längsdruck
           A.4 Spannungskategorien und Spannungsgrenzwerte
           A.5 Spezifische Kriterien, Spannungskategorien
               und Spannungsgrenzwerte für begrenzte Anwendung
    Anhang B (normativ) Zusätzliche Anforderungen für
             9-%-Nickel-Stähle
             B.1 Einleitung
             B.2 Besondere Anforderungen
    Anhang C (normativ) Druckverstärkung an Behältern aus
             austenitischen nichtrostenden Stä
           C.1 Einleitung
           C.2 Anwendungsbereich
           C.3 Begriffe und Einheiten
           C.4 Werkstoffe
           C.5 Bemessung
           C.6 Herstellung und Prüfung
           C.7 Kommentare
    Anhang D (informativ) Besondere Angaben zum Schweissen
           D.1 Anwendungsbereich
           D.2 Schweissangaben
           D.3 Anforderungen für den Sauerstoff-Betrieb
    Anhang E (normativ) Erhöhte Eigenschaften für austenitische
             nichtrostende Stähle
    Literaturhinweise

    Abstract - (Show below) - (Hide below)

    This standard is included in DIN Handbook 366.

    General Product Information - (Show below) - (Hide below)

    Document Type Standard
    Publisher German Institute for Standardisation (Deutsches Institut für Normung)
    Status Current

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 1252-2:2001 Cryogenic vessels - Materials - Part 2: Toughness requirements for temperatures between -80 °C and -20 °C
    EN ISO 6520-1:2007 Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007)
    ISO 6520-1:2007 Welding and allied processes Classification of geometric imperfections in metallic materials Part 1: Fusion welding
    ISO 9606-2:2004 Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys
    EN 1708-1:2010 Welding - Basic welded joint details in steel - Part 1: Pressurized components
    EN 288-1:1992/A1:1997 SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES FOR FUSION WELDING
    EN ISO 15613:2004 Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004)
    ISO 15614-2:2005 Specification and qualification of welding procedures for metallic materials Welding procedure test Part 2: Arc welding of aluminium and its alloys
    EN 14398-3:2003/A1:2005 CRYOGENIC VESSELS - LARGE TRANSPORTABLE NON-VACUUM INSULATED VESSELS - PART 3: OPERATIONAL REQUIREMENTS
    EN 14398-1:2003 Cryogenic vessels - Large transportable non-vacuum insulated vessels - Part 1: Fundamental requirements
    EN 1252-1:1998/AC:1998 CRYOGENIC VESSELS - MATERIALS - PART 1: TOUGHNESS REQUIREMENTS FOR TEMPERATURES BELOW -80 DEGREE C
    EN 895:1995 Destructive tests on welds in metallic materials - Transverse tensile test
    EN 13133:2000 Brazing - Brazer approval
    EN 473:2008 Non-destructive testing - Qualification and certification of NDT personnel - General principles
    EN 910 : 1996 DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS
    EN 1797:2001 Cryogenic vessels - Gas/material compatibility
    EN 10028-7:2016 Flat products made of steels for pressure purposes - Part 7: Stainless steels
    EN 288-2:1992/A1:1997 SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 2: WELDING PROCEDURE SPECIFICATION FOR ARC WELDING
    ISO 15614-1:2017 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
    EN 1626:2008 Cryogenic vessels - Valves for cryogenic service
    EN 13445-4 : 2014 COR 2017 UNFIRED PRESSURE VESSELS - PART 4: FABRICATION
    EN 12300 : 1998 AMD 1 2006 CRYOGENIC VESSELS - CLEANLINESS FOR CRYOGENIC SERVICE
    ISO 1106-1:1984 Recommended practice for radiographic examination of fusion welded joints — Part 1: Fusion welded butt joints in steel plates up to 50 mm thick
    EN 875:1995 Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination
    EN ISO 15614-2:2005 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005)
    EN ISO 9606-2:2004 Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004)
    EN 13134:2000 Brazing - Procedure approval
    ISO 15613:2004 Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test
    EN 1418:1997 Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials
    EN 10028-4:2017 Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties
    EN 970:1997 Non-destructive examination of fusion welds - Visual examination
    EN 13068-3:2001 Non-destructive testing - Radioscopic testing - Part 3: General principles of radioscopic testing of metallic materials by X- and gamma rays
    EN 13648-3:2002 Cryogenic vessels - Safety devices for protection against excessive pressure - Part 3: Determination of required discharge - Capacity and sizing
    EN 13458-3:2003/A1:2005 CRYOGENIC VESSELS - STATIC VACUUM INSULATED VESSELS - PART 3: OPERATIONAL REQUIREMENTS
    EN 1435:1997/A2:2003 NON-DESTRUCTIVE TESTING OF WELDS - RADIOGRAPHIC TESTING OF WELDED JOINTS
    EN 287-1:2011 Qualification test of welders - Fusion welding - Part 1: Steels
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective