|
ISO 7783-2:1999
|
Paints and varnishes Coating materials and coating systems for exterior masonry and concrete Part 2: Determination and classification of water-vapour transmission rate (permeability) |
|
ISO 2811-1:2016
|
Paints and varnishes — Determination of density — Part 1: Pycnometer method |
|
EN ISO 4628-2:2016
|
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016) |
|
EN 13578:2003
|
Products and systems for the protection and repair of concrete structure - Test Method - Compatibility on wet concrete |
|
EN 13687-3:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 3: Thermal cycling without de-icing salt impact |
|
EN ISO 5470-1:2016
|
Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO 5470-1:2016) |
|
EN 13581:2002
|
Products and systems for the protection and repair of concrete structures - Test method - Determination of loss of mass of hydrophobic impregnated concrete after freeze-thaw salt stress |
|
ISO 3451-1:2008
|
Plastics Determination of ash Part 1: General methods |
|
EN 13529:2003
|
Products and systems for the protection and repair of concrete structures - Test methods - Resistance to severe chemical attack |
|
EN 12190:1998
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of compressive strength of repair mortar |
|
EN 13687-5:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 5: Resistance to temperature shock |
|
EN ISO 2431:2011
|
Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011) |
|
ISO 3219:1993
|
Plastics — Polymers/resins in the liquid state or as emulsions or dispersions — Determination of viscosity using a rotational viscometer with defined shear rate |
|
EN 1242:2013
|
Adhesives - Determination of isocyanate content |
|
EN 13687-2:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 2: Thunder-shower cycling (thermal shock) |
|
EN 13579:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Drying test for hydrophobic impregnation |
|
ISO 2808:2007
|
Paints and varnishes Determination of film thickness |
|
EN 13580:2002
|
Products and systems for the protection and repair of concrete structures - Test Methods - Water absorption and resistance to alkali for hydrophobic impregnations |
|
EN ISO 3451-1:2008
|
Plastics - Determination of ash - Part 1: General methods (ISO 3451-1:2008) |
|
EN 1542:1999
|
Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off |
|
EN 1767:1999
|
Products and systems for the protection and repair of concrete structures - Test methods - Infrared analysis |
|
EN ISO 2811-2:2011
|
Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:2011) |
|
EN 13395-2:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 2: Test for flow of grout or mortar |
|
EN 13036-4:2011
|
Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test |
|
EN ISO 2409:2013
|
Paints and varnishes - Cross-cut test (ISO 2409:2013) |
|
EN 1015-7:1998
|
Methods of test for mortar for masonry - Part 7: Determination of air content of fresh mortar |
|
EN 1062-11:2002/AC:2005
|
PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR MASONRY AND CONCRETE - PART 11: METHODS OF CONDITIONING BEFORE TESTING |
|
EN ISO 3251:2008
|
Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2008) |
|
EN ISO 9514:2005
|
Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing (ISO 9514:2005) |
|
EN ISO 4628-4:2016
|
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2016) |
|
EN ISO 2811-1:2016
|
Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016) |
|
EN 1877-2:2000
|
Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 2: Determination of amine functions using the total basicity number |
|
ISO 4628-4:2016
|
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 4: Assessment of degree of cracking |
|
EN 1240:2011
|
Adhesives - Determination of hydroxyl value and/or hydroxyl content |
|
ISO 4628-5:2016
|
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking |
|
EN ISO 7783-1:1999
|
Paints and varnishes - Determination of water-vapour transmission rate - Part 1: Dish method for free films (ISO 7783-1:1996, including Technical Corrigendum 1:1998) |
|
ISO 2811-2:2011
|
Paints and varnishes Determination of density Part 2: Immersed body (plummet) method |
|
EN ISO 11358 : 1997
|
PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - GENERAL PRINCIPLES |
|
ISO 5470-1:2016
|
Rubber- or plastics-coated fabrics Determination of abrasion resistance Part 1: Taber abrader |
|
EN 1062-6:2002
|
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 6: Determination of carbon dioxide permeability |
|
EN 12192-1:2002
|
Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 1: Test method for dry components of premixed mortar |
|
EN ISO 3219:1994
|
Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate (ISO 3219:1993) |
|
ISO 1517:1973
|
Paints and varnishes Surface-drying test Ballotini method |
|
ISO 11358:1997
|
Plastics Thermogravimetry (TG) of polymers General principles |
|
ISO 2815:2003
|
Paints and varnishes Buchholz indentation test |
|
ISO 2812-1:2017
|
Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water |
|
ISO 6272-1:2011
|
Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1: Falling-weight test, large-area indenter |
|
EN 1015-3:1999/A2:2006
|
METHODS OF TEST FOR MORTAR FOR MASONRY - PART 3: DETERMINATION OF CONSISTENCE OF FRESH MORTAR (BY FLOW TABLE) |
|
EN ISO 2815:2003
|
Paints and varnishes - Buchholz indentation test (ISO 2815:2003) |
|
EN 206-1:2000/A2:2005
|
CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
|
EN 1015-6:1998/A1:2006
|
METHODS OF TEST FOR MORTAR FOR MASONRY - PART 6: DETERMINATION OF BULK DENSITY OF FRESH MORTAR |
|
ISO 3251:2008
|
Paints, varnishes and plastics Determination of non-volatile-matter content |
|
EN 12617-1:2003
|
Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Determination of linear shrinkage for polymers and surface protection systems (SPS) |
|
EN ISO 7783-2:1999
|
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 2: Determination and classification of water-vapour transmission rate (permeability) (ISO 7783-2:1999) |
|
EN 1877-1:2000
|
Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 1: Determination of epoxy equivalent |
|
EN 1504-1:2005
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1: Definitions |
|
EN 1504-8:2016
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and AVCP - Part 8: Quality control and Assessment and verification of the constancy of performance (AVCP) |
|
EN ISO 868:2003
|
Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
|
EN ISO 4628-5:2016
|
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2016) |
|
EN 1062-3:2008
|
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 3: Determination of liquid water permeability |
|
ISO 2409:2013
|
Paints and varnishes Cross-cut test |
|
EN 13687-1:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 1: Freeze-thaw cycling with de-icing salt immersion |
|
EN 1081:1998
|
Resilient floor coverings - Determination of the electrical resistance |
|
EN 1766:2017
|
Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing |
|
ISO 9514:2005
|
Paints and varnishes Determination of the pot life of multicomponent coating systems Preparation and conditioning of samples and guidelines for testing |
|
EN 1770:1998
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of the coefficient of thermal expansion |
|
EN ISO 6272-1:2011
|
Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011) |
|
EN ISO 2808:2007
|
Paints and varnishes - Determination of film thickness (ISO 2808:2007) |
|
ISO 4628-2:2016
|
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering |
|
EN 13813:2002
|
Screed material and floor screeds - Screed material - Properties and requirements |
|
ISO 868:2003
|
Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
|
EN 1062-7:2004
|
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 7: Determination of crack bridging properties |
|
ENV 1504-9 : DRAFT 1997
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - GENERAL PRINCIPLES FOR THE USE OF PRODUCTS AND SYSTEMS |
|
ISO 2431:2011
|
Paints and varnishes Determination of flow time by use of flow cups |
|
EN 13294:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of stiffening time |