DIN EN 15255:2007-11
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ENERGY PERFORMANCE OF BUILDINGS - SENSIBLE ROOM COOLING LOAD CALCULATION - GENERAL CRITERIA AND VALIDATION PROCEDURES
Hardcopy , PDF
01-04-2018
DIN EN ISO 52017-1:2018-04
DIN EN ISO 52016-1:2018-04
DIN EN ISO 52017-1:2015-03 (Draft)
DIN EN ISO 52016-1:2015-03 (Draft)
English
01-01-2007
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Vorwort
Einleitung
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe, Symbole und Einheiten
3.1 Begriffe
3.2 Symbole und Einheiten
3.3 Indizes
4 Grundlegende Annahmen
5 Anforderungen an die Daten
5.1 Allgemeines
5.2 Klimadaten
5.3 Beschreibung der Umfassungsbauteile
5.3.1 Allgemeines
5.3.2 Randbedingunge
5.3.3 Wärmeübertragungskoeffizienten
5.3.4 Geometrische und thermophysikalische Parameter
der Raumumfassung
5.4 Geräte der Kühlanlagen
5.4.1 Allgemeines
5.4.2 Konvektionsgeräte
5.4.3 Kühlflächen-Geräte
5.5 Einstufung des Verfahrens zur Berechnung
der Kühllast
6 Bericht zur Berechnung
6.1 Allgemeines
6.2 Eingangsdaten
6.3 Ausgangsdaten
7 Validierungsverfahren
7.1 Allgemeines
7.2 Bezugsraum
7.3 Klimadaten
7.4 Prüffälle
7.5 Zu berechnende Parameter
7.6 Prüfergebnisse
Anhang A (informativ) Beispiel für ein auf einem
vereinfachten Modell basierenden
Berechnungsverfahren
A.1 Einleitung
A.2 Berechnung der Innenlufttemperatur und der
operativen Temperatur für einen gegebenen
Wert der aufgewendeten Kühlleistung
A.2.1 Darstellung
A.2.2 Bestimmung der Lufttemperatur und der
operativen Temperatur
A.2.3 Ausdrücke in den Gleichungen (A.1), (A.2),
(A.3), (A.4) und (A.5)
A.3 Berechnung der Innentemperaturen und der
erforderlichen Kühlleistung
A.3.1 Allgemeine Beschreibung
A.3.2 Berechnungsverfahren f-ue-r die Regelung
der Lufttemperatur
A.3.3 Berechnungsverfahren f-ue-r die Regelung
der operativen Temperatur
Literaturhinweise
Sets out the level of input and output data, and prescribes the boundary conditions required for a calculation method of the sensible cooling load of a single room under constant and/or floating temperature taking into account the limit of the peak cooling load of the system.
| DocumentType |
Standard
|
| Pages |
49
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NBN EN 15255 : 2007 | Identical |
| NEN EN 15255 : 2007 | Identical |
| BS EN 15255:2007 | Identical |
| NF EN 15255 : 2008 | Identical |
| EN 15255:2007 | Identical |
| UNI EN 15255 : 2008 | Identical |
| NS EN 15255 : 1ED 2007 | Identical |
| I.S. EN 15255:2007 | Identical |
| VDI 2078:2015-06 | Calculation of thermal loads and room temperatures (design cooling load and annual simulation) |
| EN ISO 13792:2012 | Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - Simplified methods (ISO 13792:2012) |
| DIN V 18599-9:2016-10 | ENERGY EFFICIENCY OF BUILDINGS - CALCULATION OF THE NET, FINAL AND PRIMARY ENERGY DEMAND FOR HEATING, COOLING, VENTILATION, DOMESTIC HOT WATER AND LIGHTING - PART 9: FINAL AND PRIMARY ENERGY DEMAND OF POWER GENERATION PLANTS |
| DIN V 18599-6:2016-10 | ENERGY EFFICIENCY OF BUILDINGS - CALCULATION OF THE NET, FINAL AND PRIMARY ENERGY DEMAND FOR HEATING, COOLING, VENTILATION, DOMESTIC HOT WATER AND LIGHTING - PART 6: FINAL ENERGY DEMAND OF VENTILATION SYSTEMS AND AIR HEATING SYSTEMS FOR RESIDENTIAL BUILDINGS |
| EN ISO 15927-4:2005 | Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 4: Hourly data for assessing the annual energy use for heating and cooling (ISO 15927-4:2005) |
| ISO 13792:2012 | Thermal performance of buildings Calculation of internal temperatures of a room in summer without mechanical cooling Simplified methods |
| DIN PAS 1027 : 2004 | ENERGY EFFICIENCY OF HEATING AND VENTILATION SYSTEMS IN EXISTING BUILDING; ADDITION OF THE DIN 4701-12 BLATT 1 |
| DIN V 18599-4:2016-10 | ENERGY EFFICIENCY OF BUILDINGS - CALCULATION OF THE NET, FINAL AND PRIMARY ENERGY DEMAND FOR HEATING, COOLING, VENTILATION, DOMESTIC HOT WATER AND LIGHTING - PART 4: NET AND FINAL ENERGY DEMAND FOR LIGHTING |
| DIN V 18599-2:2016-10 | ENERGY EFFICIENCY OF BUILDINGS - CALCULATION OF THE NET, FINAL AND PRIMARY ENERGY DEMAND FOR HEATING, COOLING, VENTILATION, DOMESTIC HOT WATER AND LIGHTING - PART 2: NET ENERGY DEMAND FOR HEATING AND COOLING OF BUILDING ZONES |
| EN 410:2011 | Glass in building - Determination of luminous and solar characteristics of glazing |
| ISO 15927-4:2005 | Hygrothermal performance of buildings — Calculation and presentation of climatic data — Part 4: Hourly data for assessing the annual energy use for heating and cooling |
| DIN V 18599-3:2016-10 | ENERGY EFFICIENCY OF BUILDINGS - CALCULATION OF THE NET, FINAL AND PRIMARY ENERGY DEMAND FOR HEATING, COOLING, VENTILATION, DOMESTIC HOT WATER AND LIGHTING - PART 3: NET ENERGY DEMAND FOR AIR CONDITIONING |
| DIN V 18599-5:2016-10 | ENERGY EFFICIENCY OF BUILDINGS - CALCULATION OF THE NET, FINAL AND PRIMARY ENERGY DEMAND FOR HEATING, COOLING, VENTILATION, DOMESTIC HOT WATER AND LIGHTING - PART 5: FINAL ENERGY DEMAND OF HEATING SYSTEMS |
| EN ISO 9346:2007 | Hygrothermal performance of buildings and building materials - Physical quantities for mass transfer - Vocabulary (ISO 9346:2007) |
| EN ISO 13786:2017 | Thermal performance of building components - Dynamic thermal characteristics - Calculation methods (ISO 13786:2017, Corrected version 2018-03) |
| EN ISO 9251:1995 | Thermal insulation - Heat transfer conditions and properties of materials - Vocabulary (ISO 9251:1987) |
| EN 15377-1:2008 | Heating systems in buildings - Design of embedded water based surface heating and cooling systems - Part 1: Determination of the design heating and cooling capacity |
| EN ISO 6946:2017 | Building components and building elements - Thermal resistance and thermal transmittance - Calculation methods (ISO 6946:2017, Corrected version 2021-12) |
| EN ISO 9288:1996 | Thermal insulation - Heat transfer by radiation - Physical quantities and definitions (ISO 9288:1989) |
| DIN V 18599-8:2016-10 | ENERGY EFFICIENCY OF BUILDINGS - CALCULATION OF THE NET, FINAL AND PRIMARY ENERGY DEMAND FOR HEATING, COOLING, VENTILATION, DOMESTIC HOT WATER AND LIGHTING - PART 8: NET AND FINAL ENERGY DEMAND OF DOMESTIC HOT WATER SYSTEMS |
| PRCEN/TR 15615 : DRAFT 2014 | ENERGY PERFORMANCE OF BUILDINGS - MODULE M1-X - ACCOMPANYING TECHNICAL REPORT ON DRAFT OVERARCHING STANDARD EPB (PREN 15603) |
| ISO 9288:1989 | Thermal insulation — Heat transfer by radiation — Physical quantities and definitions |
| EN ISO 13791:2012 | Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - General criteria and validation procedures (ISO 13791:2012) |
| ISO 13786:2017 | Thermal performance of building components — Dynamic thermal characteristics — Calculation methods |
| EN ISO 13370:2017 | Thermal performance of buildings - Heat transfer via the ground - Calculation methods (ISO 13370:2017) |
| ISO 13791:2012 | Thermal performance of buildings Calculation of internal temperatures of a room in summer without mechanical cooling General criteria and validation procedures |
| ISO 10077-1:2017 | Thermal performance of windows, doors and shutters — Calculation of thermal transmittance — Part 1: General |
| DIN V 18599-1:2016-10 | ENERGY EFFICIENCY OF BUILDINGS - CALCULATION OF THE NET, FINAL AND PRIMARY ENERGY DEMAND FOR HEATING, COOLING, VENTILATION, DOMESTIC HOT WATER AND LIGHTING - PART 1: GENERAL BALANCING PROCEDURES, TERMS AND DEFINITIONS, ZONING AND EVALUATION OF ENERGY SOURCES |
| DIN V 18599-10:2016-10 | ENERGY EFFICIENCY OF BUILDINGS - CALCULATION OF THE NET, FINAL AND PRIMARY ENERGY DEMAND FOR HEATING, COOLING, VENTILATION, DOMESTIC HOT WATER AND LIGHTING - PART 10: BOUNDARY CONDITIONS OF USE, CLIMATIC DATA |
| ISO 9251:1987 | Thermal insulation Heat transfer conditions and properties of materials Vocabulary |
| ISO 7345:1987 | Thermal insulation Physical quantities and definitions |
| EN ISO 10077-1:2017 | Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General (ISO 10077-1:2017, Corrected version 2020-02) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.