ISO 1514:2016
|
Paints and varnishes — Standard panels for testing |
EN 295-3:2012
|
Vitrified clay pipe systems for drains and sewers - Part 3: Test methods |
EN ISO 4628-2:2016
|
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016) |
ISO 8501-1:2007
|
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
ISO 9377-2:2000
|
Water quality Determination of hydrocarbon oil index Part 2: Method using solvent extraction and gas chromatography |
EN 681-1:1996/A3:2005
|
ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER |
EN ISO 180:2000/A2:2013
|
PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH (ISO 180:2000/AMD 2:2013) |
ISO 527-4:1997
|
Plastics Determination of tensile properties Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites |
EN 978:1997
|
Underground tanks of glass-reinforced plastics (GRP) - Determination of factor alpha and factor beta |
EN ISO 527-4:1997
|
PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 4: TEST CONDITIONS FOR ISOTROPIC AND ORTHOTROPIC FIBRE-REINFORCED PLASTIC COMPOSITES |
EN 976-1:1997
|
Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 1: Requirements and test methods for single wall tanks |
EN 1253-4:2016
|
Gullies for buildings - Part 4: Access covers |
ISO 2808:2007
|
Paints and varnishes Determination of film thickness |
ISO 1083:2004
|
Spheroidal graphite cast irons - Classification |
EN ISO 527-2:2012
|
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) |
EN 10088-3:2014
|
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
ISO 1172:1996
|
Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content — Calcination methods |
EN ISO 2409:2013
|
Paints and varnishes - Cross-cut test (ISO 2409:2013) |
EN ISO 178:2010/A1:2013
|
PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013) |
EN ISO 7253 : 2001
|
PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY (FOG) |
EN 10088-2:2014
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
ISO 8217:2017
|
Petroleum products Fuels (class F) Specifications of marine fuels |
ISO 527-2:2012
|
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
EN ISO 1514:2016
|
Paints and varnishes - Standard panels for testing (ISO 1514:2016) |
EN 288-2:1992/A1:1997
|
SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 2: WELDING PROCEDURE SPECIFICATION FOR ARC WELDING |
ISO 4628-3:2016
|
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 3: Assessment of degree of rusting |
ISO 15614-1:2017
|
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
ISO 6272:1993
|
Paints and varnishes — Falling-weight test |
ISO 7253:1996
|
Paints and varnishes — Determination of resistance to neutral salt spray (fog) |
EN 476:2011
|
General requirements for components used in drains and sewers |
EN ISO 4628-3:2016
|
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016) |
ISO 4624:2016
|
Paints and varnishes — Pull-off test for adhesion |
ISO 180:2000
|
Plastics Determination of Izod impact strength |
EN ISO 9001:2015
|
Quality management systems - Requirements (ISO 9001:2015) |
ENV 10080 : 1995
|
STEEL FOR THE REINFORCEMENT OF CONCRETE WELDABLE RIBBED REINFORCING STEEL B500 - TECHNICAL DELIVERY CONDITIONS FOR BARS, COILS AND WELDED FABRIC |
ISO 1183-1:2012
|
Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method |
ISO 1183-2:2004
|
Plastics Methods for determining the density of non-cellular plastics Part 2: Density gradient column method |
EN 12390-2:2009
|
Testing hardened concrete - Part 2: Making and curing specimens for strength tests |
ISO 1518:1992
|
Paints and varnishes Scratch test |
EN 124:1994
|
Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, type testing, marking, quality control |
EN ISO 4624:2016
|
Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016) |
ISO 2815:2003
|
Paints and varnishes Buchholz indentation test |
EN ISO 1172:1998
|
Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods (ISO 1172:1996) |
EN ISO 14125:1998/A1:2011
|
FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF FLEXURAL PROPERTIES |
ISO 2812-1:2017
|
Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water |
ISO 14125:1998
|
Fibre-reinforced plastic composites Determination of flexural properties |
ISO 877:1994
|
Plastics Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors |
ISO 4012:1978
|
Concrete — Determination of compressive strength of test specimens |
EN ISO 2815:2003
|
Paints and varnishes - Buchholz indentation test (ISO 2815:2003) |
EN 206-1:2000/A2:2005
|
CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
EN ISO 291:2008
|
Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008) |
EN 12350-1:2009
|
Testing fresh concrete - Part 1: Sampling |
ISO 185:2005
|
Grey cast irons Classification |
ISO 630:1995
|
Structural steels Plates, wide flats, bars, sections and profiles |
EN ISO 1518:2000
|
Paints and varnishes - Scratch test (ISO 1518:1992) |
EN ISO 8501-1:2007
|
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings (ISO 8501-1:2007) |
ISO 1920:1976
|
Concrete tests Dimensions, tolerances and applicability of test specimens |
ISO 2409:2013
|
Paints and varnishes Cross-cut test |
ISO 48:2010
|
Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
ISO 15607:2003
|
Specification and qualification of welding procedures for metallic materials General rules |
ISO 178:2010
|
Plastics Determination of flexural properties |
ISO 3755:1991
|
Cast carbon steels for general engineering purposes |
ISO 1133:2005
|
Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics |
ISO 1521:1973
|
Paints and varnishes Determination of resistance to water Water immersion method |
EN ISO 9377-2 : 2000
|
WATER QUALITY - DETERMINATION OF HYDROCARBON OIL INDEX - PART 2: METHOD USING SOLVENT EXTRACTION AND GAS CHROMATOGRAPHY (ISO 9377-2:2000) |
EN ISO 2808:2007
|
Paints and varnishes - Determination of film thickness (ISO 2808:2007) |
ISO 4628-2:2016
|
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering |
EN ISO 15607:2003
|
Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003) |
ISO 1817:2015
|
Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
EN 10088-1:2014
|
Stainless steels - Part 1: List of stainless steels |