DIN EN 326-2:2000-10
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL
Hardcopy , PDF
07-03-2021
English
01-01-2000
National foreword
National Annex NA (informative) - Bibliography
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and indices
5 Initial type testing (ITT)
6 Factory production control
Annex A (informative) - Example of initial
type testing by variables - Evaluation
of bending strength of particleboards
Annex B (informative) - Factory production
control by variables - Example:
Batch production
Annex C (informative) - Example of initial
type testing attributes - Evaluation
of bonding quality of plywood
Annex D (informative) - Control of factory
production control records - Examples
of the determination of differences
between factory testing and external
testing
Annex E (informative) - Example of the
calculation of a linear correlation
Annex F (informative) - Example of the
determination of a significant
difference between the results
from the alternative test procedure
and from the standard reference
test method in accordance with
EN 13986
Bibliography
Defines methods for internal initial type testing (ITT) and internal factory production control (FPC) as well as external control of wood-based panels for their compliance with EN 13986 and other relevant product specifications.
DocumentType |
Standard
|
Pages |
32
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Superseded
|
Standards | Relationship |
NBN EN 326-2 : 2010 + A1 2014 | Identical |
UNE-EN 326-2:2011 | Identical |
EN 326-2:2010+A1:2014 | Identical |
UNI EN 326-2 : 2014 | Identical |
NEN EN 326-2 : 2010 + A1 2014 | Identical |
BS EN 326-2 : 2010 | Identical |
SN EN 326-2 : 2010 + A1 2014 | Identical |
NS EN 326-2 : 2010 + A1 2014 | Identical |
NF EN 326-2 : 2010 + A1 2014 | Identical |
I.S. EN 326-2:2010 | Identical |
EN 326-3:2003 | Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels |
EN 13353:2008+A1:2011 | Solid wood panels (SWP) - Requirements |
EN 634-1:1995 | Cement-bonded particleboards - Specification - Part 1: General requirements |
EN 319:1993 | Particleboards and fibreboards - Determination of tensile strength perpendicular to the plane of the board |
EN 13986:2004 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
EN 310:1993 | Wood-based panels - Determination of modulus of elasticity in bending and of bending strength |
EN 326-1:1994 | Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results |
EN 14755:2005 | Extruded particleboards - Specifications |
ISO 2854:1976 | Statistical interpretation of data — Techniques of estimation and tests relating to means and variances |
DIN ISO 2859-1:2014-08 | SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 1: SAMPLING SCHEMES INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION (ISO 2859-1:1999 + COR. 1:2001 + AMD.1:2011) |
EN 14279:2004+A1:2009 | Laminated Veneer Lumber (LVL) - Definitions, classification and specifications |
EN 317:1993 | Particleboards and fibreboards - Determination of swelling in thickness after immersion in water |
EN 1058:2009 | Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values |
EN 300:2006 | Oriented Strand Boards (OSB) - Definitions, classification and specifications |
EN 312:2010 | Particleboards - Specifications |
EN 622-5:2009 | Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF) |
EN 789:2004 | Timber structures - Test methods - Determination of mechanical properties of wood based panels |
ISO 2602:1980 | Statistical interpretation of test results Estimation of the mean Confidence interval |
EN 15197:2007 | Wood-based panels - Flaxboards - Specifications |
EN 622-3:2004 | Fibreboards - Specifications - Part 3: Requirements for medium boards |
EN 622-4:2009 | Fibreboards - Specifications - Part 4: Requirements for softboards |
EN 314-2:1993 | Plywood - Bonding quality - Part 2: Requirements |
EN 634-2:2007 | Cement-bonded particleboards - Specifications - Part 2: Requirements for OPC bonded particleboards for use in dry, humid and external conditions |
EN 636:2012+A1:2015 | Plywood - Specifications |
EN 622-1:2003 | Fibreboards - Specifications - Part 1: General requirements |
EN 314-1:2004 | Plywood - Bonding quality - Part 1: Test methods |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.