DIN EN 438-1:2016-06
Current
Current
The latest, up-to-date edition.
HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 1: INTRODUCTION AND GENERAL INFORMATION
Available format(s)
Hardcopy , PDF
Language(s)
German, English
Published date
01-01-2016
€68.04
Excluding VAT
This standard is included in DIN Handbook 82 and 94.
| DevelopmentNote |
Supersedes DIN 16926 and DIN 53799-10. (07/2002) Supersedes DIN EN 438-2 issue 02-1992. (08/2005)
|
| DocumentType |
Standard
|
| Pages |
11
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| EN 438-1:2016 | Identical |
| I.S. EN 438-1:2016 | Equivalent |
| BWB TL 9905-0016 : 2ED 2001 | MARKING PLATES, WITH NOS. 1 THROUGH 100, COLOURED |
| DIN 4569 E : 1997 | STEPS - TERMS FUNCTIONAL SIZES, REQUIREMENTS, TESTING |
| DIN HDBK 296 : 4ED 2015 | MOEBEL 2 - MOEBELFERTIGUNG UND -ZUBEHOER - ALLE NORMATIVEN ANFORDERUNGEN AN MOEBELFERTIGUNG UND MOEBELZUBEHOER |
| DIN 5510-2:2009-05 | PREVENTIVE FIRE PROTECTION IN RAILWAY VEHICLES - PART 2: FIRE BEHAVIOUR AND FIRE SIDE EFFECTS OF MATERIALS AND PARTS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS |
| BWB TL 7105-0049 : 6ED 2005 | |
| DIN 4102-4:2016-05 | Fire behaviour of building materials and building components - Part 4: Synopsis and application of classified building materials, components and special components |
| DIN HDBK 82 : 11ED 2017 | TISCHLERARBEITEN VOB/STLB-BAU - VOB TEIL C: ATV DIN 18299, ATV DIN 18355 |
| DIN HDBK 94 : 5ED 2016 | FASSADENARBEITEN - VORGEHAENGTE HINTERLUEFTETE FASSADEN VOB/STLB-BAU - VOB TEIL C: ATV DIN 18299, ATV DIN 18351 |
| EN 1186-2:2002 | Materials and articles in contact with foodstuffs - Plastics - Part 2: Test methods for overall migration into olive oil by total immersion |
| EN 1186-14:2002 | Materials and articles in contact with foodstuffs - Plastics - Part 14: Test methods for 'substitute tests' for overall migration from plastics intended to come into contact with fatty foodstuffs using test media iso-octane and 95 % ethanol |
| EN 438-3:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates |
| EN 13329:2016+A1:2017 | Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods |
| EN 438-7:2005 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes |
| EN 1186-4:2002 | Materials and articles in contact with foodstuffs - Plastics - Part 4: Test methods for overall migration into olive oil by cell |
| EN 1186-6:2002 | Materials and articles in contact with foodstuffs - Plastics - Part 6: Test methods for overall migration into olive oil using a pouch |
| ISO 846:1997 | Plastics — Evaluation of the action of microorganisms |
| EN 438-4:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater |
| EN 1186-11:2002 | Materials and articles in contact with foodstuffs - Plastics - Part 11: Test methods for overall migration into mixtures of C-labelled synthetic triglycerides |
| EN 1186-8:2002 | Materials and articles in contact with foodstuffs - Plastics - Part 8: Test methods for overall migration into olive oil by article filling |
| EN 438-6:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 6: Classification and specifications for Exterior-grade compact laminates of thickness 2 mm and greater |
| EN 1186-10:2002 | Materials and articles in contact with foodstuffs - Plastics - Part 10: Test methods for overall migration into olive oil (modified method for use in cases where incomplete extraction of olive oil occurs) |
| EN ISO 846:1997 | Plastics - Evaluation of the action of microorganisms (ISO 846:1997) |
| EN 1186-1:2002 | Materials and articles in contact with foodstuffs - Plastics - Part 1: Guide to the selection of conditions and test methods for overall migration |
| EN 1186-13:2002 | Materials and articles in contact with foodstuffs - Plastics - Part 13: Test methods for overall migration at high temperatures |
| EN 1186-12:2002 | Materials and articles in contact with foodstuffs - Plastics - Part 12: Test methods for overall migration at low temperatures |
| EN 1186-5:2002 | Materials and articles in contact with foodstuffs - Plastics - Part 5: Test methods for overall migration into aqueous food simulants by cell |
| EN 1186-7:2002 | Materials and articles in contact with foodstuffs - Plastics - Part 7: Test methods for overall migration into aqueous food simulants using a pouch |
| EN 438-2:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties |
| EN 1186-3:2002 | Materials and articles in contact with foodstuffs - Plastics - Part 3: Test methods for overall migration into aqueous food simulants by total immersion |
| EN 438-8:2009 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 8: Classification and specifications for design laminates |
| EN 1186-15:2002 | Materials and articles in contact with foodstuffs - Plastics - Part 15: Alternative test methods to migration into fatty food simulants by rapid extraction into iso-octane and/or 95 % ethanol |
| EN 1186-9:2002 | Materials and articles in contact with foodstuffs - Plastics - Part 9: Test methods for overall migration into aqueous food simulants by article filling |
| EN 438-5:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.