EN 1859:2009+A1:2013
|
Chimneys - Metal chimneys - Test methods |
IEC 60335-2-102:2004+AMD1:2008+AMD2:2012 CSV
|
Household and similar electrical appliances - Safety - Part 2-102:Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections |
IEC 60730-2-9:2015 RLV
|
Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing controls |
ISO 7005-2:1988
|
Metallic flanges — Part 2: Cast iron flanges |
ISO 6976:2016
|
Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition |
EN 10226-2:2005
|
Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation |
EN 60584-2:1993
|
Thermocouples - Part 2: Tolerances |
DIN ISO 2859-1:2014-08
|
SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 1: SAMPLING SCHEMES INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION (ISO 2859-1:1999 + COR. 1:2001 + AMD.1:2011) |
EN 60730-2-9:2010
|
Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls |
ISO 7005-3:1988
|
Metallic flanges Part 3: Copper alloy and composite flanges |
EN ISO 3166-1:2014
|
Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2013) |
EN 161:2011+A3:2013
|
Automatic shut-off valves for gas burners and gas appliances |
ISO 1182:2010
|
Reaction to fire tests for products Non-combustibility test |
EN ISO 228-1:2003
|
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
EN 437:2003+A1:2009
|
Test gases - Test pressures - Appliance categories |
EN 125:2010+A1:2015
|
Flame supervision devices for gas burning appliances - Thermoelectric flame supervision devices |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code) |
EN 126:2012
|
Multifunctional controls for gas burning appliances |
IEC 61058-1:2016
|
Switches for appliances - Part 1: General requirements |
EN 60584-1:2013
|
Thermocouples - Part 1: EMF specifications and tolerances |
CR 1404:1994
|
Determination of emissions from appliances burning gaseous fuels during type-testing |
EN 60335-2-102:2016
|
Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections |
ISO 3166-1:2013
|
Codes for the representation of names of countries and their subdivisions Part 1: Country codes |
EN 61058-1:2002/A2:2008
|
SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
EN 60335-1:2012/A13:2017
|
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
EN 298:2012
|
Automatic burner control systems for burners and appliances burning gaseous or liquid fuels |
ISO 7005-1:2011
|
Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems |
EN 60529:1991/AC:2016-12
|
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
EN ISO 6976:2016
|
Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition (ISO 6976:2016) |
EN 10226-1:2004
|
Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation |
IEC 60584-1:2013
|
Thermocouples - Part 1: EMF specifications and tolerances |
EN 88-1:2011+A1:2016
|
Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa |
ISO 228-1:2000
|
Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
EN 60730-1:2016
|
Automatic electrical controls - Part 1: General requirements |
IEC 60730-1:2013+AMD1:2015 CSV
|
Automatic electrical controls - Part 1: General requirements |
EN 257:2010
|
Mechanical thermostats for gas-burning appliances |