• DIN EN 806-2:2005-06

    Current The latest, up-to-date edition.

    Specification for installations inside buildings conveying water for human consumption - Part 2: Design

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  01-06-2005

    Publisher:  German Institute for Standardisation (Deutsches Institut für Normung)

    Add To Cart

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes DIN 1988-5 and DIN 1988-2. (05/2012)
    Document Type Standard
    Publisher German Institute for Standardisation (Deutsches Institut für Normung)
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    DIN HDBK 15-4 : 6ED 2012
    DIN 1988-200:2012-05 Codes of practice for drinking water installations - Part 200: Installation Type A (closed system) - Planning, components, apparatus, materials; DVGW code of practice
    DIN 50930-6:2013-10 Corrosion of metals - Corrosion of metallic materials under corrosion load by water inside of pipes, tanks and apparatus - Part 6: Evaluation process and requirements regarding the hygienic suitability in contact with drinking water
    DIN 1988-500:2011-02 Codes of practice for drinking water installations - Part 500: Pressure boosting stations with RPM-regulated pumps; DVGW code of practice
    DIN 1988-7:2004-12 CODES OF PRACTICE FOR DRINKING WATER INSTALLATIONS (TRWI) - PART 7: PREVENTION OF CORROSION DAMAGE AND CALCAREOUS DEPOSIT FORMATION - DVGW CODE OF PRACTICE

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 3822-1:1999 Acoustics Laboratory tests on noise emission from appliances and equipment used in water supply installations Part 1: Method of measurement
    EN 10240 : 1997 INTERNAL AND/OR EXTERNAL PROTECTIVE COATINGS FOR STEEL TUBES - SPECIFICATION FOR HOT DIP GALVANIZED COATINGS APPLIED IN AUTOMATIC PLANTS
    EN 1254-3:1998 COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 3: FITTINGS WITH COMPRESSION ENDS FOR USE WITH PLASTICS PIPES
    EN 60534-8-4:2015 INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-4: NOISE CONSIDERATIONS - PREDICTION OF NOISE GENERATED BY HYDRODYNAMIC FLOW
    EN 973 : 2009 CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM CHLORIDE FOR REGENERATION OF ION EXCHANGERS
    EN 12842:2012 DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS
    EN 1452-5 : 1999 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM
    EN ISO 228-2 : 2003 PIPE THREADS WHERE PRESSURE-TIGHT JOINTS ARE NOT MADE ON THE THREADS - PART 2: VERIFICATION BY MEANS OF LIMIT GAUGES
    EN 1254-4:1998/AC:1999 COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 4: FITTINGS COMBINING OTHER END CONNECTIONS WITH CAPILLARY OR COMPRESSION ENDS
    EN 13443-1 : 2002 + A1 2007 Water conditioning equipment inside buildings - Mechanical filters - Part 1: Particle rating 80 µm to 150 µm - Requirements for performances, safety and testing
    EN 12502-1 : 2004 PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN WATER DISTRIBUTION AND STORAGE SYSTEMS - PART 1: GENERAL
    EN ISO 15877-2:2009/A1:2010 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 2: PIPES
    EN 14525:2004 Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, Steel, PVC-U PE, Fibre-cement
    EN 806-1:2000/A1:2001 SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 1: GENERAL
    EN ISO 15875-3:2003 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2003)
    ISO/TS 15875-7:2003 Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 7: Guidance for the assessment of conformity
    ISO 15874-3:2013 Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings
    EN 1254-5:1998 COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 5: FITTINGS WITH SHORT ENDS FOR CAPILLARY BRAZING TO COPPER TUBES
    EN ISO 15874-5:2013 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM (ISO 15874-5:2013)
    ISO 15877-3:2009 Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 3: Fittings
    EN 1057:2006+A1:2010 Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
    EN ISO 15877-3:2009/A1:2010 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 3: FITTINGS
    EN 12201-3:2011+A1:2012 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 3: FITTINGS
    EN 14095:2003 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - ELECTROLYTIC TREATMENT SYSTEMS WITH ALUMINIUM ANODES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
    EN 89:2015 Gas-fired storage water heaters for the production of domestic hot water
    EN 1254-1:1998 COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 1: FITTINGS WITH ENDS FOR CAPILLARY SOLDERING OR CAPILLARY BRAZING TO COPPER TUBES
    EN 1490 : 2000 BUILDING VALVES - COMBINED TEMPERATURE AND PRESSURE RELIEF VALVES - TESTS AND REQUIREMENTS
    EN 1254-2 : 1998 COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 2: FITTINGS WITH COMPRESSION ENDS FOR USE WITH COPPER TUBES
    EN ISO 15876-2:2017 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTENE (PB) - PART 2: PIPES (ISO 15876-2:2017)
    EN 12502-3 : 2004 PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN WATER DISTRIBUTION AND STORAGE SYSTEMS - PART 3: INFLUENCING FACTORS FOR HOT DIP GALVANISED FERROUS MATERIALS
    1989/336/EEC : 1989 COUNCIL DIRECTIVE OF 3 MAY 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY
    EN 805 : 2000 WATER SUPPLY - REQUIREMENTS FOR SYSTEMS AND COMPONENTS OUTSIDE BUILDINGS
    ISO 3822-4:1997 Acoustics Laboratory tests on noise emission from appliances and equipment used in water supply installations Part 4: Mounting and operating conditions for special appliances
    ISO 15875-5:2003 Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 5: Fitness for purpose of the system
    EN ISO 15877-1:2009/A1:2010 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General - Amendment 1 (ISO 15877-1:2009/AMD 1:2010)
    EN ISO 15877-5:2009/A1:2010 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM
    EN 671-2:2012 Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose
    ISO 15874-1:2013 Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 1: General
    IEC 60335-2-21:2012 Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters
    EN 1567 : 1999 BUILDING VALVES - WATER PRESSURE REDUCING VALVES AND COMBINATION WATER PRESSURE REDUCING VALVES - REQUIREMENTS AND TESTS
    CEN ISO/TS 15875-7 : 2003 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CROSSLINKED POLYETHYLENE (PE-X) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    ISO 15877-2:2009 Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 2: Pipes
    EN 1717 : 2000 PROTECTION AGAINST POLLUTION OF POTABLE WATER IN WATER INSTALLATIONS AND GENERAL REQUIREMENTS OF DEVICES TO PREVENT POLLUTION BY BACKFLOW
    ISO 7-2:2000 Pipe threads where pressure-tight joints are made on the threads Part 2: Verification by means of limit gauges
    ISO 15875-2:2003 Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes
    EN ISO 15876-5:2017 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTENE (PB) - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM (ISO 15876-5:2017)
    EN 1491:2000 Building valves - Expansion valves - Tests and requirements
    IEC 60335-2-35:2012+AMD1:2016 CSV Household and similar electrical appliances - Safety - Part 2-35:Particular requirements for instantaneous water heaters
    EN 1488 : 2000 BUILDING VALVES - EXPANSION GROUPS - TESTS AND REQUIREMENTS
    ISO/TS 15876-7:2003 Plastics piping systems for hot and cold water installations Polybutylene (PB) Part 7: Guidance for the assessment of conformity
    ENV 1452-7 : DRAFT 2000 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    EN 12502-5 : 2004 PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN WATER DISTRIBUTION AND STORAGE SYSTEMS - PART 5: INFLUENCING FACTORS FOR CAST IRON, UNALLOYED AND LOW ALLOYED STEELS
    ISO 15877-1:2009 Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 1: General
    ISO 15874-2:2013 Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes
    EN ISO 228-1 : 2003 PIPE THREADS WHERE PRESSURE-TIGHT JOINTS ARE NOT MADE ON THE THREADS - PART 1: DIMENSIONS, TOLERANCES AND DESIGNATION
    ISO 15876-1:2017 Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 1: General
    ISO 15876-3:2017 Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 3: Fittings
    EN ISO 3822-4 : 1997 ACOUSTICS - LABORATORY TESTS ON NOISE EMISSION FROM APPLIANCES AND EQUIPMENT USED IN WATER SUPPLY INSTALLATIONS - PART 4: MOUNTING AND OPERATING CONDITIONS FOR SPECIAL APPLIANCES
    EN 12502-2 : 2004 PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN WATER DISTRIBUTION AND STORAGE SYSTEMS - PART 2: INFLUENCING FACTORS FOR COPPER AND COPPER ALLOYS
    EN 1487:2014 BUILDING VALVES - HYDRAULIC SAFETY GROUPS - TESTS AND REQUIREMENTS
    ISO 15877-5:2009 Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 5: Fitness for purpose of the system
    EN ISO 15875-1:2003/A1:2007 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General - Amendment 1 (ISO 15875-1:2003/Amd 1:2007)
    ISO 7-1:1994 Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation
    EN ISO 15876-1:2017 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTENE (PB) - PART 1: GENERAL (ISO 15876-1:2017)
    EN 60335-2-21:2003/corrigendum Oct. 2010 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-21: PARTICULAR REQUIREMENTS FOR STORAGE WATER HEATERS
    EN ISO/TS 15877-7 : 2003 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    ISO 3822-2:1995 Acoustics Laboratory tests on noise emission from appliances and equipment used in water supply installations Part 2: Mounting and operating conditions for draw-off taps and mixing valves
    EN 60730-2-8:2002/A1:2003 AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-8: PARTICULAR REQUIREMENTS FOR ELECTRICALLY OPERATED WIRE VALVES, INCLUDING MECHANICAL REQUIREMENTS
    EN ISO 15875-5:2003 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system (ISO 15875-5:2003)
    ISO/TS 15877-7:2009 Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 7: Guidance for the assessment of conformity
    EN ISO/TS 15876-7 : 2003 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTYLENE (PB) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    EN 12201-5:2011 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM
    EN ISO 15876-3:2017 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTENE (PB) - PART 3: FITTINGS (ISO 15876-3:2017)
    IEC 60730-2-8:2000+AMD1:2002+AMD2:2015 CSV Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated watervalves, including mechanical requirements
    EN 60335-2-35:2016 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-35: PARTICULAR REQUIREMENTS FOR INSTANTANEOUS WATER HEATERS (IEC 60335-2-35:2012, MODIFIED)
    EN 1452-4 : 1999 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 4: VALVES AND ANCILLARY EQUIPMENT
    EN 1489 : 2000 BUILDING VALVES - PRESSURE SAFETY VALVES - TESTS AND REQUIREMENTS
    ISO 6509:1981 Corrosion of metals and alloys Determination of dezincification resistance of brass
    ISO 15876-2:2017 Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 2: Pipes
    EN 12201-2:2011+A1:2013 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 2: PIPES
    EN 26:2015 Gas-fired instantaneous water heaters for the production of domestic hot water
    ISO 15875-1:2003 Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 1: General
    EN 10284 : 2000 MALLEABLE CAST IRON FITTINGS WITH COMPRESSION ENDS FOR POLYETHYLENE (PE) PIPING SYSTEMS
    IEC 60534-8-4:2015 Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow
    ISO 3822-3:1997 Acoustics Laboratory tests on noise emission from appliances and equipment used in water supply installations Part 3: Mounting and operating conditions for in-line valves and appliances
    EN ISO 3822-1:1999/A1:2008 ACOUSTICS - LABORATORY TESTS ON NOISE EMISSION FROM APPLIANCES AND EQUIPMENT USED IN WATER SUPPLY INSTALLATIONS - PART 1: METHOD OF MEASUREMENT
    EN ISO 3822-2 : 1995 ACOUSTICS - LABORATORY TESTS ON NOISE EMISSION FROM APPLIANCES AND EQUIPMENT USED IN WATER SUPPLY INSTALLATIONS - PART 2: MOUNTING AND OPERATING CONDITIONS FOR DRAW-OFF TAPS AND MIXING VALVES
    EN 1452-1 : 1999 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL
    ISO 15875-3:2003 Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 3: Fittings
    EN ISO/TS 15874-7 : 2003 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    EN ISO 15874-2:2013 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 2: PIPES (ISO 15874-2:2013)
    EN ISO 6509 : 1995 CORROSION OF METALS AND ALLOYS - DETERMINATION OF DEZINCIFICATION RESISTANCE OF BRASS
    EN 545:2010 DUCTILE IRON, PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS
    EN 1452-2 : 1999 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: PIPES
    EN 12201-1:2011 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL
    EN 29453 : 1993 SOFT SOLDER ALLOYS - CHEMICAL COMPOSITIONS AND FORMS
    ISO 15874-5:2013 Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 5: Fitness for purpose of the system
    EN 12499:2003/AC:2006 INTERNAL CATHODIC PROTECTION OF METALLIC STRUCTURES
    ISO/TS 15874-7:2003 Plastics piping systems for hot and cold water installations Polypropylene (PP) Part 7: Guidance for the assessment of conformity
    EN 10242:1994/A2:2003 THREADED PIPE FITTING IN MALLEABLE CAST IRON
    EN 10226-1 : 2004 PIPE THREADS WHERE PRESSURE TIGHT JOINTS ARE MADE ON THE THREADS - PART 1: TAPER EXTERNAL THREADS AND PARALLEL INTERNAL THREADS - DIMENSIONS, TOLERANCES AND DESIGNATION
    ISO 15876-5:2017 Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 5: Fitness for purpose of the system
    ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
    EN 1213 : 1999 BUILDING VALVES - COPPER ALLOY STOPVALVES FOR POTABLE WATER SUPPLY IN BUILDINGS - TESTS AND REQUIREMENTS
    EN 1452-3 : 1999 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 3: FITTINGS
    CEN/TS 12201-7:2014 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    EN ISO 15874-3:2013 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 3: FITTINGS (ISO 15874-3:2013)
    EN 10255:2004+A1:2007 Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions
    EN 60730-1:2016 AUTOMATIC ELECTRICAL CONTROLS - PART 1: GENERAL REQUIREMENTS (IEC 60730-1:2013, MODIFIED + COR1:2014)
    EN 625 : 1995 GAS-FIRED CENTRAL HEATING BOILERS - SPECIFIC REQUIREMENTS FOR THE DOMESTIC HOT WATER OPERATION OF COMBINATION BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 kW
    IEC 60730-1:2013+AMD1:2015 CSV Automatic electrical controls - Part 1: General requirements
    EN ISO 15874-1:2013 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General (ISO 15874-1:2013)
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective