EN 10240:1997
|
Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants |
EN 1514-1:1997
|
Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts |
EN 751-3:1996/AC:1997
|
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes |
EN 817:2008
|
Sanitary tapware - Mechanical mixing valves (PN 10) - General technical specifications |
EN ISO 7091 : 2000
|
PLAIN WASHERS - NORMAL SERIES - PRODUCT GRADE C |
EN 1254-4:1998/AC:1999
|
COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 4: FITTINGS COMBINING OTHER END CONNECTIONS WITH CAPILLARY OR COMPRESSION ENDS |
EN 13443-1:2002+A1:2007
|
Water conditioning equipment inside buildings - Mechanical filters - Part 1: Particle rating 80 µm to 150 µm - Requirements for performances, safety and testing |
EN 12502-1 : 2004
|
PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN WATER DISTRIBUTION AND STORAGE SYSTEMS - PART 1: GENERAL |
EN 681-1:1996/A3:2005
|
ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER |
EN 806-1:2000/A1:2001
|
SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 1: GENERAL |
EN ISO 15875-3:2003
|
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2003) |
ISO 15874-3:2013
|
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings |
EN 1254-5:1998
|
Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes |
ISO 15877-3:2009
|
Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 3: Fittings |
EN 1057:2006+A1:2010
|
Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
EN ISO 15877-3:2009/A1:2010
|
PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 3: FITTINGS |
ISO 4016:2011
|
Hexagon head bolts Product grade C |
EN 12502-4 : 2004
|
PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN WATER DISTRIBUTION AND STORAGE SYSTEMS - PART 4: INFLUENCING FACTORS FOR STAINLESS STEELS |
ISO 4034:2012
|
Hexagon regular nuts (style 1) Product grade C |
EN ISO 21003-3:2008
|
Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings (ISO 21003-3:2008) |
EN 1254-1:1998
|
Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes |
EN 1254-2:1998
|
Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes |
EN 12502-3 : 2004
|
PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN WATER DISTRIBUTION AND STORAGE SYSTEMS - PART 3: INFLUENCING FACTORS FOR HOT DIP GALVANISED FERROUS MATERIALS |
EN 805:2000
|
Water supply - Requirements for systems and components outside buildings |
EN 10312:2002/A1:2005
|
WELDED STAINLESS STEEL TUBES FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS - TECHNICAL DELIVERY CONDITIONS |
EN 15161:2006
|
Water conditioning equipment inside buildings - Installation, operation, maintenance and repair |
EN 751-2:1996
|
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds |
EN 1717:2000
|
Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow |
EN ISO 4016:2011
|
Hexagon head bolts - Product grade C (ISO 4016:2011) |
EN 10088-2:2014
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
ISO 9454-1:2016
|
Soft soldering fluxes Classification and requirements Part 1: Classification, labelling and packaging |
EN 12502-5 : 2004
|
PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN WATER DISTRIBUTION AND STORAGE SYSTEMS - PART 5: INFLUENCING FACTORS FOR CAST IRON, UNALLOYED AND LOW ALLOYED STEELS |
EN ISO 1127:1996
|
Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992) |
EN 1044 : 1999
|
BRAZING - FILLER METALS |
EN ISO 4034:2012/AC:2013
|
HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C (ISO 4034:2012/COR 1:2013) |
EN ISO 228-1:2003
|
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
ISO 15876-3:2017
|
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 3: Fittings |
EN 12502-2 : 2004
|
PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN WATER DISTRIBUTION AND STORAGE SYSTEMS - PART 2: INFLUENCING FACTORS FOR COPPER AND COPPER ALLOYS |
EN ISO 9453:2014
|
Soft solder alloys - Chemical compositions and forms (ISO 9453:2014) |
EN ISO 15876-3:2017
|
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings (ISO 15876-3:2017) |
ISO 7091:2000
|
Plain washers Normal series Product grade C |
EN 29454-1:1993
|
Soft soldering fluxes - Classification and requirements - Part 1: Classification, labelling and packaging (ISO 9454-1:1990) |
EN 806-2:2005
|
Specification for installations inside buildings conveying water for human consumption - Part 2: Design |
EN 751-1:1996
|
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds |
ISO 9453:2014
|
Soft solder alloys Chemical compositions and forms |
EN 200:2008
|
Sanitary tapware - Single taps and combination taps for water supply systems of type 1 and type 2 - General technical specification |
EN 60335-1:2012/A13:2017
|
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
ISO 15875-3:2003
|
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 3: Fittings |
ISO 21003-3:2008
|
Multilayer piping systems for hot and cold water installations inside buildings — Part 3: Fittings |
EN 545:2010
|
Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods |
EN 10242:1994/A2:2003
|
THREADED PIPE FITTING IN MALLEABLE CAST IRON |
EN 1111:2017
|
Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification |
ISO 228-1:2000
|
Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
EN ISO 15874-3:2013
|
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings (ISO 15874-3:2013) |
EN 10255:2004+A1:2007
|
Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions |
ISO 1127:1992
|
Stainless steel tubes Dimensions, tolerances and conventional masses per unit length |