DIN EN ISO 11812:2003-07
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
SMALL CRAFT - WATERTIGHT COCKPITS AND QUICK-DRAINING COCKPITS
Hardcopy , PDF
09-04-2019
English, German
01-01-2003
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 General requirements
5.1 Loading and measurement conditions
5.2 Requirements for 'watertight' cockpits and recesses
5.3 Requirements for 'quick draining' cockpits and recesses
5.4 Closing appliances
6 Requirements for quick-draining cockpit bottom
6.1 Minimum cockpit bottom height, H[B,min]
6.2 Exception to 6.1 for recesses or lockers
6.2.1 Exception up to 10 % of cockpit bottom area
6.2.2 Lockers in the cockpit bottom
7 Requirements for drainage of quick-draining cockpits
7.1 Cockpit drainage
7.1.1 General
7.1.2 When the boat is upright
7.1.3 When the boat is heeled
7.2 Draining time
7.3 Number of drains
7.4 Minimum drain dimensions
7.4.1 Internal dimensions of the drain
7.4.2 Eventual protective grids
7.5 Centreboard housings and other types of drain
7.6 Drain fitting
7.7 Drain piping design and construction
7.8 Draining time assessment
7.8.1 General
7.8.2 Measurement of the draining time
7.8.3 Calculation of the draining time
7.8.4 Quick method of calculation for cockpit fitted
with two drains
8 Requirement for sills
8.1 Sill height for watertight cockpits
8.2 Sill height and other requirements for quick-draining
cockpits
8.2.1 Sill-height measurement
8.2.2 Requirements for sill height of quick draining
cockpits
8.2.3 Requirements for companionway doors and appliances
above sill height
8.2.4 Other requirements
9 Watertightness requirements
9.1 Watertightness requirements of watertight cockpits
9.2 Watertightness requirements of quick-draining cockpits
9.2.1 Watertightness of the cockpit
9.2.2 Permanently open ventilation openings
10 Owner's manual - Documentation
Annex A (informative) Examples of single-plane cockpit bottoms
Annex B (normative) Analysis of multi-level cockpit bottom
Annex C (normative) Draining time calculation using tables
Annex D (normative) Alternative method of calculation - Direct
calculation with head losses
Annex E (normative) Watertightness tests
Bibliography
Specifies the requirements for cockpits and recesses to be designated either as 'watertight' or as 'quick-draining' on small craft of hull length up to 24 m. It does not set requirements for the size and shape of a cockpit or recess, nor when or where it shall be used. It only considers draining by gravity, and not by pumping or other methods.
| DevelopmentNote |
DRAFT 2018 issued in March 2018. (03/2018) THE 2020 DRAFT VERSION HAS RELEASED FOR THE STANDARD DIN EN ISO 11812
|
| DocumentType |
Standard
|
| Pages |
42
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Withdrawn
|
| Standards | Relationship |
| UNE-EN ISO 11812:2002 | Identical |
| UNI EN ISO 11812 : 2003 | Identical |
| NBN EN ISO 11812 : 2002 | Identical |
| BS EN ISO 11812:2002 | Identical |
| ONORM EN ISO 11812 : 2002 | Identical |
| NS EN ISO 11812 : 1ED 2002 | Identical |
| I.S. EN ISO 11812:2002 | Identical |
| SN EN ISO 11812 : 2001 | Identical |
| NEN EN ISO 11812 : 2002 | Identical |
| NF EN ISO 11812 : 2003 | Identical |
| ISO 11812:2001 | Identical |
| EN ISO 11812:2001 | Identical |
| DIN EN ISO 12217-2:2016-03 | SMALL CRAFT - STABILITY AND BUOYANCY ASSESSMENT AND CATEGORIZATION - PART 2: SAILING BOATS OF HULL LENGTH GREATER THAN OR EQUAL TO 6 M (ISO 12217-2:2015) |
| DIN EN ISO 6185-4:2011-10 | INFLATABLE BOATS - PART 4: BOATS WITH A HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER |
| DIN EN ISO 6185-3:2014-12 | INFLATABLE BOATS - PART 3: BOATS WITH A HULL LENGTH LESS THAN 8 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER (ISO 6185-3:2014) |
| DIN EN ISO 12217-3:2016-03 | SMALL CRAFT - STABILITY AND BUOYANCY ASSESSMENT AND CATEGORIZATION - PART 3: BOATS OF HULL LENGTH LESS THAN 6 M (ISO 12217-3:2015) |
| DIN EN ISO 12217-1:2016-08 | SMALL CRAFT - STABILITY AND BUOYANCY ASSESSMENT AND CATEGORIZATION - PART 1: NON-SAILING BOATS OF HULL LENGTH GREATER THAN OR EQUAL TO 6 M (ISO 12217-1:2015) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.