DIN EN ISO 80000-1:2013-08
|
Quantities and units - Part 1: General (ISO 80000-1:2009 + Cor 1:2011) |
ISO/IEC 17025:2005
|
General requirements for the competence of testing and calibration laboratories |
API 5T1 : 2017
|
IMPERFECTION AND DEFECT TERMINOLOGY |
ISO 10893-3:2011
|
Non-destructive testing of steel tubes Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections |
ISO 10893-5:2011
|
Non-destructive testing of steel tubes Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections |
ISO 6506-1:2014
|
Metallic materials Brinell hardness test Part 1: Test method |
ISO 8501-1:2007
|
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
ASNT SNT TC 1A : 2016
|
TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL |
ASTM E 309 : 2016 : REDLINE
|
Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation |
ISO/TR 9769:1991
|
Steel and iron Review of available methods of analysis |
API 5CT : 2012
|
CASING AND TUBING |
MIL-STD-810 Revision G:2008
|
ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
NACE TM 02 84 : 2016
|
EVALUATION OF PIPELINE AND PRESSURE VESSEL STEELS FOR RESISTANCE TO HYDROGEN-INDUCED CRACKING |
DIN EN ISO 8501-1:2007-12
|
PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - VISUAL ASSESSMENT OF SURFACE CLEANLINESS - PART 1: RUST GRADES AND PREPARATION GRADES OF UNCOATED STEEL SUBSTRATES AND OF STEEL SUBSTRATES AFTER OVERALL REMOVAL OF PREVIOUS COATINGS |
ISO 6508-1:2016
|
Metallic materials — Rockwell hardness test — Part 1: Test method |
ASTM E 273 : 2015 : REDLINE
|
Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing |
ISO 6892-1:2016
|
Metallic materials Tensile testing Part 1: Method of test at room temperature |
NACE TM 01 77 : 2016
|
LABORATORY TESTING OF METALS FOR RESISTANCE TO SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING IN H[2]S ENVIRONMENTS |
DIN CEN ISO/TR 10400;DIN SPEC 91040:2011-07
|
Petroleum and natural gas industries - Equations and calculations for the properties of casing, tubing, drill pipe and line pipe used as casing or tubing (ISO/TR 10400:2007); English version CEN ISO/TR 10400:2011, only on CD-ROM |
ISO 10893-11:2011
|
Non-destructive testing of steel tubes Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections |
ASTM E 83 : 2016 : REDLINE
|
Standard Practice for Verification and Classification of Extensometer Systems |
API 5A2 : 6ED 88
|
BULLETIN ON THREAD COMPOUNDS FOR CASING, TUBING AND LINE PIPE |
DIN EN ISO 7500-1:2016-05
|
METALLIC MATERIALS - CALIBRATION AND VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES - PART 1: TENSION/COMPRESSION TESTING MACHINES - CALIBRATION AND VERIFICATION OF THE FORCE-MEASURING SYSTEM (ISO 7500-1:2015) |
DIN EN ISO 10893-11:2011-07
|
NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 11: AUTOMATED ULTRASONIC TESTING OF THE WELD SEAM OF WELDED STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSE IMPERFECTIONS |
ASTM E 10 : 2017-05
|
TEST METHOD FOR BRINELL HARDNESS OF METALLIC MATERIALS |
DIN EN ISO 6506-1:2015-02
|
METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 1: TEST METHOD (ISO 6506-1:2014) |
DIN EN ISO 6508-2:2015-06
|
Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015); German version EN ISO 6508-2:2015 |
ISO/IEC 17011:2004
|
Conformity assessment General requirements for accreditation bodies accrediting conformity assessment bodies |
DIN EN ISO 6892-1:2017-02
|
METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT ROOM TEMPERATURE (ISO 6892-1:2016) |
ISO 9513:2012
|
Metallic materials — Calibration of extensometer systems used in uniaxial testing |
DIN EN ISO 10893-10:2011-07
|
NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 10: AUTOMATED FULL PERIPHERAL ULTRASONIC TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSE IMPERFECTIONS |
ISO 6508-2:2015
|
Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters |
ISO 15156-2:2015
|
Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons |
DIN EN ISO 643:2015-06 (Draft)
|
STEELS - MICROGRAPHIC DETERMINATION OF THE APPARENT GRAIN SIZE (ISO 643:2012) |
DIN EN ISO 10893-2:2011-07
|
NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 2: AUTOMATED EDDY CURRENT TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE DETECTION OF IMPERFECTIONS |
ISO 13678:2010
|
Petroleum and natural gas industries Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements |
DIN EN ISO 10893-5:2011-07
|
Non-destructive testing of steel tubes - Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections (ISO 10893-5:2011); German version EN ISO 10893-5:2011 |
API Q1 : 2013
|
SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR MANUFACTURING ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRY |
DIN EN ISO 15156-2:2015-12
|
PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015) |
DIN EN ISO 6506-2:2016-04 (Draft)
|
METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6506-2:2014) |
DIN EN ISO 9513:2013-05
|
Metallic materials - Calibration of extensometer systems used in uniaxial testing (ISO 9513:2012 + Cor. 1:2013) |
API 5A3 : 2011
|
RECOMMENDED PRACTICE ON THREAD COMPOUNDS FOR CASING, TUBING, LINE PIPE, AND DRILL STEM ELEMENTS |
ISO 80000-1:2009
|
Quantities and units — Part 1: General |
ISO 643:2012
|
Steels Micrographic determination of the apparent grain size |
ISO 11484:2009
|
Steel products — Employer's qualification system for non-destructive testing (NDT) personnel |
ISO 6506-2:2017
|
Metallic materials Brinell hardness test Part 2: Verification and calibration of testing machines |
DIN EN ISO 6508-1:2016-12
|
Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016); German version EN ISO 6508-1:2016 |
ISO/TR 10400:2007
|
Petroleum and natural gas industries Equations and calculations for the properties of casing, tubing, drill pipe and line pipe used as casing or tubing |
ISO 7500-1:2015
|
Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system |
ASTM E 543 : 2015 : REDLINE
|
Standard Specification for Agencies Performing Nondestructive Testing |
DIN EN ISO 13678:2012-04
|
PETROLEUM AND NATURAL GAS INDUSTRIES - EVALUATION AND TESTING OF THREAD COMPOUNDS FOR USE WITH CASING, TUBING, LINE PIPE AND DRILL STEM ELEMENTS (ISO 13678:2010) |
ASTM E 709 : 2015 : REDLINE
|
Standard Guide for Magnetic Particle Testing |
ISO 10893-2:2011
|
Non-destructive testing of steel tubes Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections |
API TR 5C3 : 2008
|
CALCULATING PERFORMANCE PROPERTIES OF PIPE USED AS CASING OR TUBING |
ISO 10893-10:2011
|
Non-destructive testing of steel tubes Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections |
DIN EN ISO 10893-3:2011-07
|
NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 3: AUTOMATED FULL PERIPHERAL FLUX LEAKAGE TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) FERROMAGNETIC STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSE IMPERFECTIONS |
DIN EN ISO/IEC 17011:2016-09 (Draft)
|
CONFORMITY ASSESSMENT - REQUIREMENTS FOR ACCREDITATION BODIES ACCREDITING CONFORMITY ASSESSMENT BODIES (ISO/IEC 17011:2017) |