IEC 60243-1:2013
|
Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies |
IEC 60695-11-20:2015
|
Fire hazard testing - Part 11-20: Test flames - 500 W flame test method |
IEC 60112:2003+AMD1:2009 CSV
|
Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
ISO 6603-2:2000
|
Plastics — Determination of puncture impact behaviour of rigid plastics — Part 2: Instrumented impact testing |
DIN EN 60707 : 1999
|
FLAMMABILITY OF SOLID NON-METALLIC MATERIALS WHEN EXPOSED TO FLAME SOURCES - LIST OF TEST METHODS |
ISO 3671:1976
|
Plastics — Aminoplastic moulding materials — Determination of volatile matter |
ISO 3167:2014
|
Plastics Multipurpose test specimens |
IEC 60250:1969
|
Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths |
ISO 171:1980
|
Plastics — Determination of bulk factor of moulding materials |
DIN IEC 60093 : 1993
|
METHODS OF TEST FOR INSULATING MATERIALS FOR ELECTRICAL PURPOSES; VOLUME RESISTIVITY AND SURFACE RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS |
DIN EN ISO 3671:1998-10
|
Aminoplastic moulding materials - Determination of volatile matter (ISO 3671:1976) |
ISO 120:1977
|
Plastics Phenol-formaldehyde mouldings Determination of free ammonia and ammonium compounds Colorimetric comparison method |
ISO 295:2004
|
Plastics — Compression moulding of test specimens of thermosetting materials |
ISO 10350-1:2017
|
Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials |
DIN EN ISO 60:2000-01
|
Plastics - Determination of apparent density of material that can be poured from a specified funnel (ISO 60:1977); English version of DIN EN ISO 60 |
ISO 2039-1:2001
|
Plastics Determination of hardness Part 1: Ball indentation method |
ISO 10724-1:1998
|
Plastics — Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) — Part 1: General principles and moulding of multipurpose test specimens |
DIN EN 60243-1 : 2014
|
ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 1: TESTS AT POWER FREQUENCIES (IEC 60243-1:2013) |
DIN IEC 60167 : 1993
|
METHODS OF TEST FOR INSULATING MATERIALS FOR ELECTRICAL PURPOSES; INSULATION RESISTANCE OF SOLID MATERIALS |
ISO 8256:2004
|
Plastics — Determination of tensile-impact strength |
ISO 11359-2:1999
|
Plastics Thermomechanical analysis (TMA) Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature |
ISO 60:1977
|
Plastics — Determination of apparent density of material that can be poured from a specified funnel |
DIN EN 60695-11-20 : 2016
|
FIRE HAZARD TESTING - PART 11-20: TEST FLAMES - 500 W FLAME TEST METHODS (IEC 60695-11-20:2015 + COR1:2016) |
DIN EN ISO 6603-2:2002-04
|
Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented impact testing (ISO 6603-2:2000); English version of DIN EN ISO 6603-2 |
ISO 75-2:2013
|
Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite |
DIN EN ISO 120:1998-10
|
Plastics - Phenol-formaldehyde mouldings - Determination of free ammonia and ammonium compounds; Colorimetric comparison method (ISO 120:1977); German version EN ISO 120:1998 |
ISO 527-2:2012
|
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
DIN EN ISO 4589-2:2016-03 (Draft)
|
PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 2: AMBIENT-TEMPERATURE TEST (ISO 4589-2:2017) |
IEC 60167:1964
|
Methods of test for the determination of the insulation resistance of solid insulating materials |
ISO 14530-1:1999
|
Plastics Unsaturated-polyester powder moulding compounds (UP-PMCs) Part 1: Designation system and basis for specifications |
ISO 14530-3:1999
|
Plastics Unsaturated-polyester powder moulding compounds (UP-PMCs) Part 3: Requirements for selected moulding compounds |
ISO 1183:1987
|
Plastics Methods for determining the density and relative density of non-cellular plastics |
IEC 60296:2012 RLV
|
Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear |
IEC 60707:1999
|
Flammability of solid non-metallic materials when exposed to flame sources - List of test methods |
IEC 60093:1980
|
Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials |
ISO 472:2013
|
Plastics Vocabulary |
DIN EN ISO 295:2004-05
|
Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:2004) |
ISO 2577:2007
|
Plastics Thermosetting moulding materials Determination of shrinkage |
DIN EN ISO 10350:1995-09
|
PLASTICS- ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA |
IEC 60695-11-10:2013
|
Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
ISO 291:2008
|
Plastics Standard atmospheres for conditioning and testing |
ISO 179-1:2010
|
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test |
ISO 62:2008
|
Plastics Determination of water absorption |
ISO 7808:1992
|
Plastics — Thermosetting moulding materials — Determination of transfer flow |
DIN EN ISO 62:2008-05
|
PLASTICS - DETERMINATION OF WATER ABSORPTION |
ISO 4589-2:2017
|
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test |
ISO 2818:1994
|
Plastics — Preparation of test specimens by machining |
ISO 899-1:2017
|
Plastics — Determination of creep behaviour — Part 1: Tensile creep |
ISO 4614:1977
|
Plastics Melamine-formaldehyde mouldings Determination of extractable formaldehyde |
DIN 53466:1984-02
|
TESTING OF PLASTICS; DETERMINATION OF BULK FACTOR AND APPARENT DENSITY OF MOULDING MATERIALS |
ISO 178:2010
|
Plastics Determination of flexural properties |
DIN EN ISO 75-2:2013-08
|
PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD - PART 2: PLASTICS AND EBONITE (ISO 75-2:2013) |
DIN VDE 0370-1 : 1978
|
INSULATING OILS - NEW INSULATING OILS FOR TRANSFORMERS AND SWITCHGEAR |
DIN EN ISO 3167:2014-11
|
PLASTICS - MULTIPURPOSE TEST SPECIMENS (ISO 3167:2014) |
DIN IEC 60112 : 1984
|
METHOD FOR DETERMINING THE COMPARATIVE AND THE PROOF TRACKING INDICES OF SOLID INSULATING MATERIALS UNDER MOIST CONDITIONS |
DIN EN ISO 4614:2000-05
|
PLASTICS - MELAMINE-FORMALDEHYDE MOULDINGS - DETERMINATION OF EXTRACTABLE FORMALDEHYDE |
ISO 527-1:2012
|
Plastics Determination of tensile properties Part 1: General principles |
ISO 10724-2:1998
|
Plastics — Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) — Part 2: Small plates |