• Shopping Cart
    There are no items in your cart

DIN EN ISO 1513:2010-10

Current

Current

The latest, up-to-date edition.

Paints and varnishes - Examination and preparation of test samples (ISO 1513:2010)

Available format(s)

Hardcopy , PDF

Language(s)

English, German

Published date

01-10-2010

€57.57
Excluding VAT

DevelopmentNote
Supersedes DIN EN 21513 (05/2002)
DocumentType
Standard
Pages
9
PublisherName
German Institute for Standardisation (Deutsches Institut für Normung)
Status
Current
Supersedes

DIN EN ISO 20567-3:2013-04 PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 3: SINGLE-IMPACT TEST WITH A FREE-FLYING IMPACT BODY (ISO 20567-3:2012)
DIN EN ISO 9117-2:2010-07 Paints and varnishes - Drying tests - Part 2: Pressure test for stackability (ISO 9117-2:2010)
DIN 53781:2016-03 PAINTS AND VARNISHES - METHODS FOR TESTING THE RESISTANCE OF COATINGS TO IONIZING RADIATION IN NUCLEAR PLANTS
DIN 53150:2002-09 PAINTS AND VARNISHES - DETERMINATION OF THE DRYING STAGE OF COATINGS (MODIFIED BANDOW-WOLFF METHOD)
DIN EN ISO 28199-1:2010-01 Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 1: Relevant vocabulary and preparation of test panels (ISO 28199-1:2009)
DIN EN ISO 9117-1:2009-10 Paints and varnishes - Drying tests - Part 1: Determination of through-dry state and through-dry time (ISO 9117-1:2009)
DIN EN ISO 11890-2:2013-07 PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013)
DIN EN ISO 2811-1:2016-08 Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016)
DIN EN ISO 6272-2:2011-11 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011)
DIN EN ISO 11507:2007-05 PAINTS AND VARNISHES - EXPOSURE OF COATINGS TO ARTIFICIAL WEATHERING - EXPOSURE TO FLUORESCENT UV LAMPS AND WATER
DIN EN ISO 2812-2:2007-05 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 2: WATER IMMERSION METHOD
DIN EN ISO 17132:2008-01 PAINTS AND VARNISHES - T-BEND TEST
DIN EN ISO 3233-1:2013-05 PAINTS AND VARNISHES - DETERMINATION OF PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 1: METHOD USING A COATED TEST PANEL TO DETERMINE NON-VOLATILE MATTER AND TO DETERMINE DRY-FILM DENSITY BY THE ARCHIMEDES PRINCIPLE (ISO 3233-1:2013)
DIN EN ISO 2812-3:2012-10 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 3: METHOD USING AN ABSORBENT MEDIUM (ISO 2812-3:2012)
DIN EN ISO 14680-1:2006-04 Paints and varnishes - Determination of pigment content - Part 1: Centrifuge method (ISO 14680-1:2000)
DIN EN ISO 14680-3:2006-04 Paints and varnishes - Determination of pigment content - Part 3: Filtration method (ISO 14680-3:2000)
DIN EN ISO 14680-2:2006-04 Paints and varnishes - Determination of pigment content - Part 2: Ashing method (ISO 14680-2:2000)
DIN EN ISO 6272-1:2011-11 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011)
DIN EN ISO 20566:2013-06 Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory-scale car-wash (ISO 20566:2013)
DIN EN ISO 9038:2013-12 Determination of sustained combustibility of liquids (ISO 9038:2013)
DIN EN ISO 1520:2007-11 PAINTS AND VARNISHES - CUPPING TEST
DIN EN ISO 7783-1:1999-06 PAINTS AND VARNISHES - DETERMINATION OF WATER-VAPOUR TRANSMISSION RATE - PART 1: DISH METHOD FOR FREE FILMS
DIN 53215:1998-11 DETERMINING THE NON-VOLATILE MATTER CONTENT OF BITUMINOUS COATING MATERIALS
DIN 53219:2009-08 PAINTS AND VARNISHES - DETERMINATION OF PERCENTAGE VOLUME OF NON-VOLATILE MATTER - METHOD BY DETERMINATION OF THE PRACTICAL DRY-FILM DENSITY
DIN EN ISO 9117-3:2010-07 Paints and varnishes - Drying tests - Part 3: Surface-drying test using ballotini (ISO 9117-3:2010)
DIN EN ISO 3233-2:2014-10 PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 2: METHOD USING THE DETERMINATION OF NON-VOLATILE-MATTER CONTENT IN ACCORDANCE WITH ISO 3251 AND DETERMINATION OF THE DRY FILM DENSITY ON COATED TEST PANELS BY THE ARCHIMEDES PRINCIPLE (ISO 3233-2:2014)
DIN EN ISO 12137:2012-01 Paints and varnishes - Determination of mar resistance (ISO 12137:2011)
DIN EN ISO 7783:2012-02 PAINTS AND VARNISHES - DETERMINATION OF WATER-VAPOUR TRANSMISSION PROPERTIES - CUP METHOD (ISO 7783:2011)
DIN EN ISO 16474-1:2014-03 PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 16474-1:2013)
DIN EN ISO 2812-5:2007-05 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 5: TEMPERATURE-GRADIENT OVEN METHOD
DIN EN ISO 6860:2006-06 Paints and varnishes - Bend test (conical mandrel) (ISO 6860:2006)
DIN EN ISO 16862:2006-08 Paints and varnishes - Evaluation of sag resistance (ISO 16862:2003)
DIN EN ISO 11997-2:2013-12 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT (ISO 11997-2:2013)
DIN EN ISO 15528:2013-12 PAINTS, VARNISHES AND RAW MATERIALS FOR PAINTS AND VARNISHES - SAMPLING (ISO 15528:2013)
DIN EN ISO 3679:2015-06 Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015)
DIN EN ISO 13803:2015-02 PAINTS AND VARNISHES - DETERMINATION OF HAZE ON PAINT FILMS AT 20 DEGREES (ISO 13803:2014)
DIN EN ISO 3251:2008-06 PAINTS, VARNISHES AND PLASTICS - DETERMINATION OF NON-VOLATILE MATTER CONTENT
DIN EN ISO 11890-1:2007-09 Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007)
DIN EN ISO 1519:2011-04 Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011)
DIN EN ISO 15181-1:2007-10 Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 1: General method for extraction of biocides (ISO 15181-1:2007)
DIN EN ISO 7253:2002-04 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY (FOG)
DIN EN ISO 16925:2014-06 Paints and varnishes - Determination of the resistance of coatings to pressure water-jetting (ISO 16925:2014)
DIN EN ISO 9117-5:2012-11 Paints and varnishes - Drying tests - Part 5: Modified Bandow-Wolff test (ISO 9117-5:2012)
DIN EN ISO 9117-4:2012-11 Paints and varnishes - Drying tests - Part 4: Test using a mechanical recorder (ISO 9117-4:2012)
DIN HDBK 286/4 : 2ED 2013 KORROSIONSSCHUTZ DURCH BESCHICHTUNGEN UND UEBERZUEGE 4 - KORROSIONSGESCHUETZTE ERZEUGNISSE, ALLGEMEINE NORMEN
DIN EN ISO 2431:2012-03 PAINTS AND VARNISHES - DETERMINATION OF FLOW TIME BY USE OF FLOW CUPS (ISO 2431:2011)
DIN EN ISO 1524:2013-06 PAINTS, VARNISHES AND PRINTING INKS - DETERMINATION OF FINENESS OF GRIND (ISO 1524:2013)
DIN EN ISO 1522:2007-04 Paints and varnishes - Pendulum damping test (ISO 1522:2006)
DIN EN ISO 16927:2014-06 PAINTS AND VARNISHES - DETERMINATION OF THE OVERCOATABILITY AND RECOATABILITY OF A COATING (ISO 16927:2014)
DIN HDBK 266 : 2ED 2004 KORROSIONSSCHUTZ VON STAHL DURCH BESCHICHTUNGEN UND UEBERZUEGE 3 - DIN-EN-ISO-NORMEN
DIN EN ISO 1518-2:2012-01 PAINTS AND VARNISHES - DETERMINATION OF SCRATCH RESISTANCE - PART 2: VARIABLE-LOADING METHOD (ISO 1518-2:2011)
DIN EN ISO 6504-3:2007-05 PAINTS AND VARNISHES - DETERMINATION OF HIDING POWER - PART 3: DETERMINATION OF CONTRAST RATIO OF LIGHT-COLOURED PAINTS AT A FIXED SPREADING RATE
DIN EN ISO 6504-1:2006-04 PAINTS AND VARNISHES - DETERMINATION OF HIDING POWER - PART 1: KUBELKA-MUNK METHOD FOR WHITE AND LIGHT-COLOURED PAINTS
DIN EN ISO 2409:2013-06 PAINTS AND VARNISHES - CROSS-CUT TEST (ISO 2409:2013)

DIN EN ISO 4618:2015-01 Paints and varnishes - Terms and definitions (ISO 4618:2014); Trilingual version EN ISO 4618:2014
DIN EN ISO 15528:2013-12 PAINTS, VARNISHES AND RAW MATERIALS FOR PAINTS AND VARNISHES - SAMPLING (ISO 15528:2013)
ISO 15528:2013 Paints, varnishes and raw materials for paints and varnishes Sampling
ISO 4618:2014 Paints and varnishes — Terms and definitions

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.