DIN EN ISO 25239-4:2012-03
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
FRICTION STIR WELDING - ALUMINIUM - PART 4: SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES (ISO 25239-4:2011)
Hardcopy , PDF
07-03-2021
German, English
01-03-2012
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Vorwort
Einleitung
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Symbole und Abkürzungen
5 Entwicklung und Qualifizierung von
Schweissverfahren
5.1 Allgemeines
5.2 Technischer Inhalt einer pWPS
5.2.1 Angaben zum Hersteller
5.2.2 Grundwerkstoffart(en), Werkstoffzustand
(-zustände) und Bezugsnorm(en)
5.2.3 Masse des Grundwerkstoffs
5.2.4 Bezeichnung der Einrichtung
5.2.5 Werkzeugbezeichnung
5.2.6 Spannvorrichtung
5.2.7 Verbindungsgeometrie
5.2.8 Vorbereitung der Verbindung und
Reinigungsverfahren
5.2.9 Schweisseinzelheiten
5.2.10 Schweissgeschwindigkeit
5.2.11 Schweissposition
5.2.12 Wärmebehandlung vor dem Schweissen
5.2.13 Vorwärmtemperatur
5.2.14 Haltetemperatur
5.2.15 Zwischenlagentemperatur
5.2.16 Schutzgas
5.2.17 Nachbehandlung
6 Qualifizierung auf Grundlage einer
Schweissverfahrensprüfung
6.1 Allgemeines
6.2 Prüfstücke
6.2.1 Form und Masse der Prüfstücke
6.2.2 Schweissen von Prüfstücken
6.3 Untersuchung und Prüfung von
Prüfstücken
6.3.1 Prüfumfang
6.3.2 Sichtprüfung
6.3.3 Zerstörende Prüfungen
6.3.4 Wiederholungsprüfung
6.4 Geltungsbereich
6.4.1 Allgemeines
6.4.2 Bezogen auf den Hersteller
6.4.3 Vorwärmtemperatur
6.4.4 Zwischenlagentemperatur
6.4.5 Andere Einflussgrössen
6.5 Bericht über die Qualifizierung eines
Schweissverfahrens (WPQR)
7 Qualifizierung auf Grundlage einer schweisstechnischen
Prüfung vor Fertigungsbeginn
7.1 Allgemeines
7.2 Prüfstücke
7.3 Untersuchung und Prüfung von
Prüfstücken
7.4 Geltungsbereich
7.5 Bericht über die Qualifizierung eines
Schweissverfahrens (WPQR)
Anhang A (informativ) Vorläufige Schweissanweisung
(pWPS)
Anhang B (informativ) Zerstörungsfreie Prüfung
Anhang C (informativ) "S"-Biege-Hammerprüfung
für Überlappstösse
Anhang D (informativ) Vordruck für Bericht über
die Qualifizierung eines Schweissverfahrens (WPQR)
Literaturhinweise
This standard is included in DIN DVS Handbook 283 and 532.
| Committee |
CEN/TC 121
|
| DocumentType |
Standard
|
| Pages |
30
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| EN ISO 25239-4:2011 | Identical |
| ISO 25239-4:2011 | Identical |
| DIN DVS HDBK 532 : 1ED 2013 | SCHWEISSTECHNIK 16 - BOLZENSCHWEISSEN, REIBSCHWEISSEN, PRESSSCHWEISSEN |
| DIN EN ISO 25239-5:2012-03 | FRICTION STIR WELDING - ALUMINIUM - PART 5: QUALITY AND INSPECTION REQUIREMENTS (ISO 25239-5:2011) |
| DIN EN ISO 25239-3:2012-03 | FRICTION STIR WELDING - ALUMINIUM - PART 3: QUALIFICATION OF WELDING OPERATORS (ISO 25239-3:2011) |
| DIN EN ISO 25239-2:2012-03 | FRICTION STIR WELDING - ALUMINIUM - PART 2: DESIGN OF WELD JOINTS (ISO 25239-2:2011) |
| ISO 25239-5:2011 | Friction stir welding Aluminium Part 5: Quality and inspection requirements |
| DIN EN ISO 17640:2016-04 (Draft) | NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING - TECHNIQUES, TESTING LEVELS, AND ASSESSMENT (ISO 17640:2017) |
| ISO 209:2007 | Aluminium and aluminium alloys — Chemical composition |
| ISO 6520-1:2007 | Welding and allied processes Classification of geometric imperfections in metallic materials Part 1: Fusion welding |
| DIN EN 1320:1996-12 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - FRACTURE TEST |
| ISO 10042:2005 | Welding Arc-welded joints in aluminium and its alloys Quality levels for imperfections |
| ISO 15614-2:2005 | Specification and qualification of welding procedures for metallic materials Welding procedure test Part 2: Arc welding of aluminium and its alloys |
| DIN EN ISO 10042:2006-02 | WELDING - ARC-WELDED JOINTS IN ALUMINIUM AND ITS ALLOYS - QUALITY LEVELS FOR IMPERFECTIONS |
| ISO 25239-1:2011 | Friction stir welding Aluminium Part 1: Vocabulary |
| DIN EN ISO 3452-3:2014-03 | NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 3: REFERENCE TEST BLOCKS (ISO 3452-3:2013) |
| ISO 9017:2001 | Destructive tests on welds in metallic materials Fracture test |
| ISO 17636:2003 | Non-destructive testing of welds Radiographic testing of fusion-welded joints |
| DIN EN ISO 13916:1996-11 | WELDING - MEASUREMENT OF PREHEATING TEMPERATURE, INTERPASS TEMPERATURE AND PREHEAT MAINTENANCE TEMPERATURE (ISO 13916:2017) |
| DIN EN ISO 25239-5:2012-03 | FRICTION STIR WELDING - ALUMINIUM - PART 5: QUALITY AND INSPECTION REQUIREMENTS (ISO 25239-5:2011) |
| ISO 5173:2009 | Destructive tests on welds in metallic materials — Bend tests |
| ISO 17640:2017 | Non-destructive testing of welds Ultrasonic testing Techniques, testing levels, and assessment |
| DIN EN ISO 4136:2013-02 | Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2012) |
| ISO 857-1:1998 | Welding and allied processes Vocabulary Part 1: Metal welding processes |
| ISO 17639:2003 | Destructive tests on welds in metallic materials Macroscopic and microscopic examination of welds |
| DIN EN ISO 5173:2012-02 | Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009 + Amd. 1:2011) |
| DIN EN ISO 3452-2:2014-03 | Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2013) |
| DIN EN ISO 25239-1:2012-03 | FRICTION STIR WELDING - ALUMINIUM - PART 1: VOCABULARY (ISO 25239-1:2011) |
| DIN EN ISO 3452-5:2009-04 | NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 5: PENETRANT TESTING AT TEMPERATURES HIGHER THAN 50 DEGREE C |
| DIN EN ISO 14175:2008-06 | WELDING CONSUMABLES - GASES AND GAS MIXTURES FOR FUSION WELDING AND ALLIED PROCESSES |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| ISO 17637:2016 | Non-destructive testing of welds Visual testing of fusion-welded joints |
| DIN EN ISO 17637:2015-05 (Draft) | NON-DESTRUCTIVE TESTING OF WELDS - VISUAL TESTING OF FUSION-WELDED JOINTS (ISO 17637:2016) |
| ISO/TR 17671-1:2002 | Welding Recommendations for welding of metallic materials Part 1: General guidance for arc welding |
| DIN EN ISO 3452-4:1999-02 | NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 4: EQUIPMENT |
| ISO 14175:2008 | Welding consumables — Gases and gas mixtures for fusion welding and allied processes |
| DIN EN 1321:1996-12 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - MACROSCOPIC AND MICROSCOPIC EXAMINATION OF WELDS |
| DIN EN ISO 15614-2:2005-07 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005); German version EN ISO 15614-2:2005 |
| DIN EN ISO 17636-2:2013-05 | Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2013) |
| ISO 4136:2012 | Destructive tests on welds in metallic materials Transverse tensile test |
| ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test |
| ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials General rules |
| ISO 2107:2007 | Aluminium and aluminium alloys — Wrought products — Temper designations |
| DIN EN ISO 17636-1:2013-05 | Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2013) |
| ISO 13916:2017 | Welding — Measurement of preheating temperature, interpass temperature and preheat maintenance temperature |
| DIN EN 1011-1:2009-07 | WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 1: GENERAL GUIDANCE FOR ARC WELDING |
| DIN EN ISO 3452-6:2009-04 | NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 6: PENETRANT TESTING AT TEMPERATURES LOWER THAN 10 DEGREE C |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.