DIN HDBK 286/4 : 2ED 2013
Current
Current
The latest, up-to-date edition.
KORROSIONSSCHUTZ DURCH BESCHICHTUNGEN UND UEBERZUEGE 4 - KORROSIONSGESCHUETZTE ERZEUGNISSE, ALLGEMEINE NORMEN
Published date
12-01-2013
Sorry this product is not available in your region.
The individual standards included in this DIN Handbook are listed in the Reference Standards fields.
DevelopmentNote |
Supersedes DIN HDBK 143, 168, 266 and 286. (04/2008) 2ED 2013 edition currently is not available, new 2018 edition expected in January 2018. (10/2017)
|
DocumentType |
Standard
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Current
|
Supersedes |
DIN EN ISO 4628-1:2016-07 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 1: GENERAL INTRODUCTION AND DESIGNATION SYSTEM (ISO 4628-1:2016) |
DIN EN ISO 4628-7:2016-07 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 7: ASSESSMENT OF DEGREE OF CHALKING BY VELVET METHOD (ISO 4628-7:2016) |
DIN EN ISO 4628-6:2011-12 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method (ISO 4628-6:2011) |
DIN EN ISO 9224:2012-05 | Corrosion of metals and alloys - Corrosivity of atmospheres - Guiding values for the corrosivity categories (ISO 9224:2012) |
DIN 50986:2015-03 | PAINTS AND VARNISHES - DETERMINATION OF DRY-FILM THICKNESS USING THE WEDGE-CUT METHOD (SCRIBE AND DRILL METHOD) |
DIN EN ISO 4628-2:2016-07 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 2: ASSESSMENT OF DEGREE OF BLISTERING (ISO 4628-2:2016) |
DIN 3476:1996-08 | VALVES AND FITTINGS FOR UNTREATED AND POTABLE WATER - PROTECTION AGAINST CORROSION BY INTERNAL EPOXY COATING OF COATING POWDERS (P) OR LIQUID VARNISHES (F) - REQUIREMENTS AND TESTS |
DIN EN ISO 9225:2012-05 | Corrosion of metals and alloys - Corrosivity of atmospheres - Measurement of environmental parameters affecting corrosivity of atmospheres (ISO 9225:2012) |
DIN EN ISO 2360:2016-05 (Draft) | NON-CONDUCTIVE COATINGS ON NON-MAGNETIC ELECTRICALLY CONDUCTIVE BASE METALS - MEASUREMENT OF COATING THICKNESS - AMPLITUDE-SENSITIVE EDDY-CURRENT METHOD (ISO 2360:2017) |
DIN EN 1123-1:2004-12 | Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control; German version EN 1123-1:1999 + A1:2004 |
DIN EN ISO 9223:2012-05 | Corrosion of metals and alloys - Corrosivity of atmospheres - Classification, determination and estimation (ISO 9223:2012) |
DIN EN ISO 4618:2015-01 | Paints and varnishes - Terms and definitions (ISO 4618:2014); Trilingual version EN ISO 4618:2014 |
DIN EN ISO 9117-5:2012-11 | Paints and varnishes - Drying tests - Part 5: Modified Bandow-Wolff test (ISO 9117-5:2012) |
DIN EN ISO 4628-4:2016-07 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 4: ASSESSMENT OF DEGREE OF CRACKING (ISO 4628-4:2016) |
DIN 50977:2005-12 | Measurement of coating thickness - Non contact measurement of coating thickness on continuously moving objects |
DIN EN ISO 15528:2013-12 | PAINTS, VARNISHES AND RAW MATERIALS FOR PAINTS AND VARNISHES - SAMPLING (ISO 15528:2013) |
DIN EN ISO 2409:2013-06 | PAINTS AND VARNISHES - CROSS-CUT TEST (ISO 2409:2013) |
DIN EN ISO 1513:2010-10 | Paints and varnishes - Examination and preparation of test samples (ISO 1513:2010) |
DIN 55950:2001-08 | PAINTS, VARNISHES AND SIMILAR COATING MATERIALS; ABBREVIATIONS (SYMBOLS) FOR THE BASIS OF THE PAINT MEDIUM |
DIN EN ISO 2431:2012-03 | PAINTS AND VARNISHES - DETERMINATION OF FLOW TIME BY USE OF FLOW CUPS (ISO 2431:2011) |
DIN EN ISO 2178:2015-01 (Draft) | NON-MAGNETIC COATINGS ON MAGNETIC SUBSTRATES - MEASUREMENT OF COATING THICKNESS - MAGNETIC METHOD (ISO 2178:2016) |
DIN EN ISO 4628-8:2013-03 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 8: ASSESSMENT OF DEGREE OF DELAMINATION AND CORROSION AROUND A SCRIBE OR OTHER ARTIFICIAL DEFECT (ISO 4628-8:2012) |
DIN 55900-1:2002-05 | COATINGS FOR RADIATORS - PART 1: TERMS, REQUIREMENTS AND TESTS FOR PRIMERS AND INDUSTRIALLY APPLIED PRIMING COATS |
DIN EN ISO 4628-3:2016-07 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016); German version EN ISO 4628-3:2016 |
DIN 55900-2:2002-05 | COATINGS FOR RADIATORS - PART 2: TERMS, REQUIREMENTS AND TESTS FOR FINISHING PAINTS AND INDUSTRIALLY APPLIED FINISHING COATS |
DIN EN ISO 4628-10:2016-07 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree of filiform corrosion (ISO 4628-10:2016) |
DIN 6607:2016-07 | EXTERNAL PROTECTIVE COATING OF UNDERGROUND STEEL TANKS - REQUIREMENTS AND TESTING |
DIN EN ISO 4628-5:2016-07 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2016) |
DIN EN ISO 9226:2012-05 | Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity (ISO 9226:2012) |
DIN EN ISO 2080:2009-08 | Metallic and other inorganic coatings - Surface treatment, metallic and other inorganic coatings - Vocabulary (ISO 2080:2008) |
DIN EN ISO 9117-1:2009-10 | Paints and varnishes - Drying tests - Part 1: Determination of through-dry state and through-dry time (ISO 9117-1:2009) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.