DIN HDBK 459 : 1ED 2003
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Superseded date
01-06-2012
Superseded by
Published date
12-01-2013
Sorry this product is not available in your region.
The individual standards included in this DIN Handbook are listed in the Reference Standards fields.
| DevelopmentNote |
Supersedes DIN HDBK 26. (02/2005)
|
| DocumentType |
Standard
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| DIN 59761:2006-09 | SQUARE BARS OF WROUGHT NICKEL AND WROUGHT NICKEL ALLOYS, HOT ROLLED - DIMENSIONS AND TOLERANCES ON DIMENSIONS AND FORM |
| DIN 1701:1980-05 | REFINED NICKEL |
| DIN 59780:2008-05 | ROUND WIRE OF WROUGHT NICKEL AND WROUGHT NICKEL ALLOYS, HOT ROLLED - DIMENSIONS AND TOLERANCES ON DIMENSIONS AND FORM |
| DIN 1736-1:1985-08 | WELDING FILLER METALS FOR NICKEL AND NICKEL ALLOYS - COMPOSITION, APPLICATION AND TECHNICAL DELIVERY CONDITIONS |
| DIN 59746:2004-07 | Strip and sheet of straightened strip sections of wrought nickel and wrought nickel alloys, cold rolled - Dimensions and tolerances on dimensions and form |
| DIN 17862:2012-03 | TITANIUM AND TITANIUM ALLOY BARS - TECHNICAL SPECIFICATION |
| DIN 59767:2008-05 | HEXAGONAL BARS OF WROUGHT NICKEL AND WROUGHT NICKEL ALLOYS, DRAWN - DIMENSIONS AND TOLERANCES ON DIMENSIONS AND FORM |
| DIN 17744:2002-09 | WROUGHT NICKEL ALLOYS WITH MOLYBDENUM AND CHROMIUM - CHEMICAL COMPOSITION |
| DIN 59765:2008-05 | ROUND BARS OF WROUGHT NICKEL AND WROUGHT NICKEL ALLOYS, DRAWN - DIMENSIONS AND TOLERANCES ON DIMENSIONS AND FORM |
| DIN 59760:2006-09 | ROUND BARS OF WROUGHT NICKEL AND WROUGHT NICKEL ALLOYS, HOT ROLLED - DIMENSIONS AND TOLERANCES ON DIMENSIONS AND FORM |
| DIN 59766:2008-05 | SQUARE BARS OF WROUGHT NICKEL AND WROUGHT NICKEL ALLOYS, DRAWN - DIMENSIONS AND TOLERANCES ON DIMENSIONS AND FORM |
| DIN 59768:2008-05 | RECTANGULAR BARS OF WROUGHT NICKEL AND WROUGHT NICKEL ALLOYS, DRAWN WITH SHARP EDGES - DIMENSIONS AND TOLERANCES ON DIMENSIONS AND FORM |
| DIN 17741:2002-09 | WROUGHT NICKEL ALLOYS, LOW ALLOYED - CHEMICAL COMPOSITION |
| DIN 17750:2002-09 | Wrought nickel and nickel alloys sheet, plate and strip - Requirements and testing |
| DIN 59762:1974-12 | HEXAGONAL BARS OF WROUGHT NICKEL ALLOYS, HOT ROLLED; DIMENSIONS, TOLERANCES |
| DIN EN 12659:1999-11 | LEAD AND LEAD ALLOYS - LEAD |
| DIN 1702:1967-01 | NICKEL ANODES |
| DIN EN 1179:2003-09 | ZINC AND ZINC ALLOYS - PRIMARY ZINC |
| DIN 59781:2008-05 | ROUND WIRES OF WROUGHT NICKEL AND WROUGHT NICKEL ALLOYS, DRAWN - DIMENSIONS AND TOLERANCES ON DIMENSIONS AND FORM |
| DIN 59783:1974-12 | HEXAGONAL WIRE OF WROUGHT NICKEL AND NICKEL ALLOYS, DRAWN; DIMENSIONS, TOLERANCES |
| DIN EN 611-1:1995-09 | TIN AND TIN ALLOYS - PEWTER AND PEWTERWARE - PART 1: PEWTER |
| DIN 9711-1:1963-02 | MAGNESIUM EXTRUDED SECTIONS; TECHNICAL CONDITIONS OF DELIVERY |
| DIN EN 12421:2015-12 (Draft) | MAGNESIUM AND MAGNESIUM ALLOYS - UNALLOYED MAGNESIUM |
| DIN 17864:2012-03 | TITANIUM AND TITANIUM WROUGHT ALLOYS FORGINGS (HAMMER AND DROP FORGINGS) - TECHNICAL SPECIFICATION |
| DIN 17007-4:2012-12 | MATERIAL NUMBERS - PART 4: SYSTEM OF THE PRINCIPAL GROUPS 2 AND 3: NON-FERROUS METALS |
| DIN EN 10204:2005-01 | Metallic products - Types of inspection documents; German version EN 10204:2004 |
| DIN 9005-1:1973-11 | DROP FORGINGS OF WROUGHT MAGNESIUM ALLOYS; TECHNICAL CONDITIONS OF DELIVERY |
| DIN 17742:2002-09 | WROUGHT NICKEL ALLOYS WITH CHROMIUM - CHEMICAL COMPOSITION |
| DIN 59610:2004-02 | Lead and lead alloys - Rolled lead sheet for general purposes |
| DIN 17751:2002-09 | TUBES OF WROUGHT NICKEL AND NICKEL ALLOYS - PROPERTIES |
| DIN EN 611-2:1996-08 | TIN AND TIN ALLOYS - PEWTER AND PEWTERWARE - PART 2: PEWTERWARE |
| DIN EN 12402:1999-10 | LEAD AND LEAD ALLOYS - METHODS OF SAMPLING FOR ANALYSIS |
| DIN 59740:2004-07 | Sheets of wrought nickel and wrought nickel alloys, hot rolled - Dimensions and tolerances on dimensions and form |
| DIN 1707-100:2011-09 | SOFT SOLDER ALLOYS - CHEMICAL COMPOSITION AND FORMS ADDITIONAL TO DIN EN ISO 9453:2014-12 |
| DIN EN 13615:2002-04 | METHODS FOR THE ANALYSIS OF INGOT TIN - DETERMINATION OF IMPURITY ELEMENT CONTENTS IN TIN GRADES 99,90 % AND 99,85 % BY ATOMIC SPECTROMETRY |
| DIN EN 12588:2007-03 | Lead and lead alloys - Rolled lead sheet for building purposes |
| DIN 17752:2002-09 | RODS AND BARS OF WROUGHT AND NICKEL ALLOYS - PROPERTIES |
| DIN 17743:2002-09 | WROUGHT NICKEL ALLOYS WITH COPPER - CHEMICAL COMPOSITION |
| DIN 59745:2004-07 | Sheet of wrought nickel and wrought nickel alloys, cold rolled - Dimensions and tolerances on dimensions and form |
| DIN 59782:1974-12 | SQUARE WIRE OF WROUGHT NICKEL AND NICKEL ALLOYS, DRAWN; DIMENSIONS, TOLERANCES |
| DIN EN 13283:2003-01 | ZINC AND ZINC ALLOYS - SECONDARY ZINC |
| DIN 17860:2010-01 | Titanium and titanium alloy strip, sheet and plate - Technical conditions of delivery |
| DIN 9005-3:1974-01 | DROP FORGINGS OF WROUGHT MAGNESIUM ALLOYS; PERMISSIBLE VARIATIONS |
| DIN 59755:1974-12 | TUBES OF WROUGHT NICKEL AND NICKEL ALLOYS, COLD WORKED; DIMENSIONS, TOLERANCES |
| DIN 9711-2:1963-02 | MAGNESIUM EXTRUDED SECTIONS; DESIGN |
| DIN 9715:1982-08 | MAGNESIUM SEMI-FINISHED PRODUCTS; PROPERTIES |
| DIN EN 12938:2000-10 | Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry (includes AC:2000); German version EN 12938:1999 + AC:2000 |
| DIN 17640-1:2004-02 | Lead alloys for general purposes |
| DIN 17740:2002-09 | WROUGHT NICKEL - CHEMICAL COMPOSITION |
| DIN EN 29453:1994-02 | SOFT SOLDER ALLOYS - CHEMICAL COMPOSITIONS AND FORMS |
| DIN 17753:2002-09 | WIRES OF WROUGHT NICKEL AND NICKEL ALLOYS - PROPERTIES |
| DIN 59742:2004-07 | Circular blanks and rings of wrought nickel and wrought nickel alloys, hot rolled - Dimensions and tolerances on dimensions and form |
| DIN EN 12548:1999-11 | LEAD AND LEAD ALLOYS - LEAD ALLOY INGOTS FOR ELECTRIC CABLE SHEATHING AND FOR SLEEVES |
| DIN 59763:2006-09 | RECTANGULAR BARS OF WROUGHT NICKEL AND NICKEL ALLOYS, HOT ROLLED - DIMENSIONS AND TOLERANCES ON DIMENSIONS AND FORM |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.