• There are no items in your cart

DIN HDBK 6 : 14ED 2016

Current

Current

The latest, up-to-date edition.

BOHRER, SENKER, REIBAHLEN, GEWINDEBOHRER, GEWINDESCHNEIDEISEN UND GEWINDEFURCHER

Published date

12-01-2013

The individual standards included in this DIN Handbook are listed in the Reference Standards fields.

DocumentType
Standard
PublisherName
German Institute for Standardisation (Deutsches Institut für Normung)
Status
Current

DIN 205:1996-12 HAND REAMERS FOR METRIC TAPERS
DIN ISO 5419:1998-06 TWIST DRILLS - TERMS, DEFINITIONS AND TYPES
DIN 6539:1991-05 CONTINUOUS PARALLEL SHANK SOLID HARDMETAL TWIST DRILLS; DIMENSIONS
DIN 357:2016-02 MACHINE NUT TAPS FOR COARSE PITCH METRIC ISO-THREADS M3 TO M68
DIN 2172-1:2013-11 REAMERS - PART 1: TECHNICAL SPECIFICATIONS FOR REAMERS WITH SHANK
DIN 2174:2008-11 COLD-FORMING TAPS FOR ISO METRIC COARSE PITCH THREAD M2 TO M39 AND ISO METRIC FINE PITCH THREAD M3 X 0,25 TO M52 X 4 - DIMENSIONS
DIN EN 24230:1990-06 HAND AND MACHINE-OPERATED CIRCULAR SCREWING DIES FOR TAPER PIPE THREADS, R SERIES
DIN EN 24231:1990-06 HAND AND MACHINE-OPERATED CIRCULAR SCREWING DIES FOR PARALLEL PIPE THREADS, G SERIES
DIN 2181:2015-09 SETS OF 2 TAPS FOR METRIC FINE ISO-THREADS M1 X 0,2 TO M52 X 4
DIN 1899:2006-11 MICRO-PRECISION DRILLS
DIN 335:2007-12 COUNTERSINKS 90 DEGREES
DIN 8050:1997-06 MACHINE-REAMERS WITH PARALLEL SHANKS, WITH CARBIDE TIPS, WITH SHORT CUTTING PART
DIN 1414-2:1998-06 Technical specifications for twist drills of high-speed steel - Part 2: Inspection
DIN 346:2006-11 MORSE TAPER SHANK TWIST DRILLS, OVERSIZE SHANK
DIN 376:2016-02 MACHINE SCREWING TAPS FOR COARSE PITCH METRIC ISO-THREADS M1,6 TO M68
DIN 204:1996-12 HAND REAMERS FOR MORSE TAPERS
DIN 40435:2003-07 MACHINE TAPS FOR THE TAPPED HOLES (EG) FOR WIRE THREAD INSERTS FOR ISO METRIC SCREW THREADS ACCORDING TO DIN 8140 - COARSE PITCH THREADS EG M2 TO EG M52 AND FINE PITCH THREADS EG M8 X 1 TO EG M48 X 3 - DIMENSIONS
DIN 8093-1:2013-11 HARDMETAL MACHINE REAMERS WITH PARALLEL SHANK - PART 1: REAMERS WITH TIPS
DIN 8051:1979-09 Machine-reamers with Morse taper shank, with carbide tips, with short cutting part
DIN 2172-2:2007-12 REAMERS - PART 2: TECHNICAL SPECIFICATIONS FOR SHELL REAMERS
DIN 802-3:2016-03 TOLERANCES ON THE THREADED PORTION OF TAPS - PART 3: GROUND TAPS FOR PIPE THREAD (G) ACCORDING TO DIN EN ISO 228-1 AND PIPE THREAD (RP) ACCORDING TO DIN EN 10226-1 - MANUFACTURING TOLERANCES ON THE THREADED PORTION
DIN 212-2:2011-02 Machine reamers with parallel shanks - Part 2: Stepped shanks
DIN 1898-2:2007-05 TAPER PIN HOLE DRILLS - PART 2: PIN HOLE DRILLS WITH MORSE TAPER SHANK
DIN 802-5:1997-02 TOLERANCES ON THE THREADED PORTION OF TAPE - PART 5: GROUND THREADED TAPS FOR ISO METRIC THREAD; THREADS FOR INTERFERENCE FITS ACCORDING TO DIN 8141-1, COARSE AND FINE PITCHES; MANUFACTURING TOLERANCES ON THE THREADED PORTION
DIN 10:2009-12 SQUARES OF PARALLEL SHANKS FOR ROTATING TOOLS
DIN 6540-2:1993-04 TECHNICAL DELIVERY CONDITIONS FOR SOLID HARDMETAL TWIST DRILLS ACCORDING TO DIN 6537 AND DIN 6539; INSPECTION
DIN 6538-1:1993-06 TWIST DRILLS WITH HARDMETAL CUTTING EDGES WITH REINFORCED PARALLEL SHANK; DIMENSIONS
DIN 8037:1971-08 TWIST DRILLS WITH PARALLEL SHANK WITH CARBIDE TIPS FOR DRILLING METAL
DIN 2175-1:2015-03 COLD-FORMING TAPS - PART 1: TECHNICAL DELIVERY CONDITIONS FOR HIGH-SPEED STEEL COLD-FORMING TAPS
DIN 1867:2007-12 COUNTERSINKS 90 DEGREE, WITH MORSE TAPER SHANK AND DETACHABLE PILOT
DIN 338:2006-11 Parallel shank twist drills, jobber series
DIN 6540-1:1993-04 TECHNICAL DELIVERY CONDITIONS FOR SOLID HARDMETAL TWIST DRILLS ACCORDING TO DIN 6537 AND DIN 6539; REQUIREMENTS
DIN 382:2009-12 HEXAGONAL DIE - NUTS
DIN 8094:1979-09 MACHINE-REAMERS WITH MORSE TAPER SHANK, WITH CARBIDE TIPS, WITH LONG CUTTING PART
DIN ISO 513:2014-05 Classification and application of hard cutting materials for metal removal with defined cutting edges - Designation of the main groups and groups of application (ISO 513:2012)
DIN 9:1996-12 HAND TAPER PIN REAMERS
DIN 375:2007-12 COUNTERBORES WITH MORSE TAPER SHANK AND DETACHABLE PILOT
DIN 8011:2007-12 CARBIDE TIPS FOR REAMERS, COUNTERBORES AND SHANK-TYPE CUTTERS
DIN 206:2008-03 HAND REAMERS
DIN 40433:2008-11 MACHINE TAPS FOR STEEL CONDUIT THREAD PG 7 TO PG 48
DIN 2184-1:2015-02 TAPS AND COLD FORMING TAPS - PART 1: LONG TYPE; GENERAL PLAN OF DIMENSIONS
DIN 138:2003-04 METAL - CUTTING TOOLS - BORES, KEYWAYS AND DRIVING FEATURES FOR TOOLS WITH PARALLEL BORE AND 1 IN 30 TAPER BORE
DIN 1866:2007-12 COUNTERSINKS 90 DEGREE, WITH PARALLEL SHANK SOLID PILOT
DIN 339:2006-11 Parallel shank twist drills for use in jig bushes
DIN EN 25968:1990-07 CIRCULAR SCREWING DIES; TERMINOLOGY
DIN 334:2007-12 COUNTERSINKS 60 DEGREES
DIN 336:2003-07 DIAMETERS OF DRILLS FOR MINOR DIAMETERS OF TAPPED THREADS
DIN 2197-2:2015-03 SCREWING TAPS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR GROUND CARBIDE TAPS
DIN 1414-1:2006-11 TECHNICAL SPECIFICATIONS FOR TWIST DRILLS OF HIGH-SPEED STEEL - PART 1: REQUIREMENTS
DIN 371:2016-01 MACHINE TAPS WITH REINFORCED SHANK FOR COARSE PITCH METRIC ISO-THREADS M1 TO M10 AND FINE PITCH METRIC ISO-THREADS M1 X 0,2 TO M10 X 1,25
DIN 222:1981-10 SHELL DRILLS
DIN 1412:2001-03 Twist drills made of high-speed steel - Shapes of points
DIN 8043:2007-12 CORE DRILLS WITH CARBIDE TIPS
DIN 345:2006-11 MORSE TAPER SHANK TWIST DRILLS
DIN 2173:2008-03 COUNTERSINKS AND COUNTERBORES, TOOLS WITH PILOT AND SHANK - TECHNICAL SPECIFICATIONS
DIN 2189:2008-11 COLD-FORMING TAPS FOR PIPE THREADS G1/16 TO G1 - DIMENSIONS
DIN 1897:2006-11 PARALLEL SHANK TWIST DRILLS, STUB SERIES
DIN 2175-2:2015-03 COLD-FORMING TAPS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR CARBIDE COLD-FORMING TAPS
DIN 6537:1993-04 SOLID-HARDMETAL TWIST DRILLS WITH STEPPED PARALLEL SHANK; DIMENSIONS
DIN 374:2016-01 MACHINE SCREWING TAPS FOR FINE PITCH METRIC ISO-THREADS M3 X 0,2 TO M52 X 4
DIN 2184-2:2003-12 TAPS AND COLD FORMING TAPS - PART 2: SHORT TYPE - GENERAL PLAN OF DIMENSIONS
DIN 802-4:2012-01 Ground thread taps for ISO metric threads of tolerances 7G, 8G and special tolerances, coarse and fine pitches - Part 4: Manufacturing tolerances on the threaded portion
DIN EN 25967:1990-07 TAPS FOR THREAD CUTTING; NOMENCLATURE OF THE MAIN TYPES AND TERMINOLOGY
DIN 341:2006-11 MORSE TAPER SHANK TWIST DRILLS FOR USE IN JIG BUSHES, LONG SERIES
DIN 5156:2008-11 MACHINE TAPS FOR PIPE THREADS G 1/16 TO G 2 AND RP 1/16 TO RP 2
DIN 1869:2006-11 PARALLEL SHANK TWIST DRILLS, EXTRA LONG SERIES
DIN 2197-1:2015-03 SCREWING TAPS - PART 1: TECHNICAL DELIVERY CONDITIONS FOR GROUND HIGH-SPEED STEEL TAPS
DIN 1870:2006-11 MORSE TAPER SHANK TWIST DRILLS, EXTRA LONG SERIES
DIN 8379:2006-11 SUBLAND TWIST DRILLS WITH MORSE TAPER SHANKS FOR HOLES PRIOR TO TAPPING SCREW THREADS
DIN 311:1975-03 BRIDGE REAMERS WITH MORSE TAPER SHANK
DIN 1898-1:2007-05 TAPER PIN HOLE DRILLS - PART 1: PIN HOLE DRILLS WITH PARALLEL SHANK
DIN 347:1962-03 COUNTERSINKS WITH 120 DEGREES POINT ANGLE
DIN EN ISO 4957:2001-02 TOOL STEELS
DIN 352:2016-01 SETS OF TAPS - SETS OF 3 TAPS FOR METRIC COARSE ISO-THREADS M1 TO M68
DIN 1895:2007-05 MACHINE REAMERS FOR MORSE TAPERS
DIN ISO 11054:2006-09 Cutting tools - Designation of high-speed steel groups (ISO 11054:2006)
DIN 8093-2:2013-11 HARDMETAL MACHINE REAMERS WITH PARALLEL SHANK - PART 2: NC-REAMERS
DIN 859:2007-12 HAND REAMERS WITH PARALLEL SHANK - ADJUSTABLE, SLOTTED
DIN 802-6:2003-07 TOLERANCES ON THE THREADED PORTION OF TAPS - PART 6: GROUND TAPS FOR TAPPED HOLES (EG) FOR WIRE THREAD INSERTS ACCORDING TO DIN 8140 FOR ISO METRIC COARSE AND FINE PITCH THREADS - MANUFACTURING TOLERANCES ON THE THREADED PORTION
DIN 340:2006-11 Parallel shank twist drills, long series

Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.