Development Note
|
Supersedes DIN 51354-1 and DIN 51354-2. (05/2006) |
Document Type
|
Standard |
ISBN
|
|
Pages
|
|
Published
|
|
Publisher
|
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status
|
Current |
Supersedes
|
|
DIN HDBK 173 : 4ED 2008
|
|
BWB TL 9150-0077 : 2ED 2007
|
LUBRICATING OIL, GEAR, EP, ISO VG 460 NATO CODE: NONE, BUNDESWEHR CODE: OY1025 |
BWB TL 9150-0079 : 2ED 2007
|
LUBRICATING OIL, GEAR, EP, ISO VG 150 NATO CODE: NONE, BUNDESWEHR CODE: OY1195 |
DIN EN ISO 12922:2013-04
|
LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU (ISO 12922:2012) |
DIN ISO 281 Beiblatt 3:2009-07
|
ROLLING BEARINGS - DYNAMIC LOAD RATINGS AND RATING LIFE - SUPPLEMENT 3: ESTIMATING OF THE CONTAMINATION FACTOR RESPECTIVELY THE CONTAMINATION LEVEL FOR ROLLING BEARINGS IN CLOSED INDUSTRIAL GEAR UNITS |
BWB TL 9150-0076 : 3ED 2008
|
LUBRICATING OIL, GEAR, EP, ISO VG 320 NATO CODE: NONE BUNDESWEHR CODE: OY1020 |
PD ISO/TR 18792:2008
|
Lubrication of industrial gear drives |
DIN 51515-2:2010-02
|
Lubricants and governor fluids for turbines - Minimum requirements - Part 2: Turbine oils TG for high temperature service |
DIN 51515-1:2010-02
|
Lubricants and governor fluids for turbines - Minimum requirements - Part 1: Turbine oils TD for normal service |
DIN 51524-2:2006-04
|
PRESSURE FLUIDS - HYDRAULIC OILS - PART 2: HLP HYDRAULIC OILS - MINIMUM REQUIREMENTS |
DIN 51524-3:2006-04
|
PRESSURE FLUIDS - HYDRAULIC OILS - PART 3: HVLP HYDRAULIC OILS - MINIMUM REQUIREMENTS |
ISO 4287:1997
|
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
IP 334 : 2015
|
DETERMINATION OF LOAD CARRYING CAPACITY OF LUBRICANTS - FZG GEAR MACHINE METHOD |
ISO 6743-6:1990
|
Lubricants, industrial oils and related products (class L) Classification Part 6: Family C (Gears) |
ISO 1328-1:2013
|
Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth |
DIN 3961:1978-08
|
TOLERANCES FOR CYLINDRICAL GEAR TEETH; BASES |
ISO/TR 13989-1:2000
|
Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears Part 1: Flash temperature method |
ISO/TR 13989-2:2000
|
Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears Part 2: Integral temperature method |
DIN 3962-2:1978-08
|
TOLERANCES FOR CYLINDRICAL GEAR TEETH; TOLERANCES FOR TOOTH TRACE DEVIATIONS |
DIN 3962-1:1978-08
|
TOLERANCES FOR CYLINDRICAL GEAR TEETH; TOLERANCES FOR DEVIATIONS OF INDIVIDUAL PARAMETERS |
DIN 3963:1978-08
|
Tolerances for Cylindrical Gear Teeth; Tolerances for Working Deviations |
DIN 50150:2000-10
|
TESTING OF METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES |
ASTM D 5182 : 1997 : EDT 1
|
Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method) |
ISO 5725-2:1994
|
Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
ISO 4964:1984
|
Steel Hardness conversions |
ISO 12925-1:1996
|
Lubricants, industrial oils and related products (class L) Family C (Gears) Part 1: Specifications for lubricants for enclosed gear systems |
ISO/TR 10064-4:1998
|
Code of inspection practice Part 4: Recommendations relative to surface texture and tooth contact pattern checking |
ISO 10825:1995
|
Gears — Wear and damage to gear teeth — Terminology |
Unfortunately, this product is not available for purchase in your region.
-
Access your standards online with a subscription
Features
- Simple online access to standards, technical information and regulations
- Critical updates of standards and customisable alerts and notifications
- Multi - user online standards collection: secure, flexibile and cost effective