|
DIN EN 16473:2015-03
|
Firefighters helmets - Helmets for technical rescue |
|
DIN 14151-3:2016-08
|
RESCUE CUSHIONS - PART 3: JUMPING CUSHION TYPE 16 - REQUIREMENTS, TESTING |
|
DIN 51517-1:2014-02
|
LUBRICANTS - LUBRICATING OILS - PART 1: LUBRICATING OILS C, MINIMUM REQUIREMENTS |
|
DIN HDBK 479 : 2ED 2017
|
KAUTSCHUK UND ELASTOMERE - PHYSIKALISCHE UND CHEMISCHE PRUEFVERFAHREN |
|
DIN EN ISO 3821:2016-10 (Draft)
|
GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
|
DIN EN ISO 3949:2016-08 (Draft)
|
PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION (ISO 3949:2009) |
|
DIN EN ISO 6185-4:2011-10
|
INFLATABLE BOATS - PART 4: BOATS WITH A HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER |
|
DIN EN ISO 6185-3:2014-12
|
INFLATABLE BOATS - PART 3: BOATS WITH A HULL LENGTH LESS THAN 8 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER (ISO 6185-3:2014) |
|
DIN EN ISO/IEC 80079-38:2012-08 (Draft)
|
EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016) |
|
DIN EN 14241-1:2013-11
|
CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS |
|
DIN EN ISO 11114-2:2013-07
|
Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2013); German version EN ISO 11114-2:2013 |
|
DIN EN 13483:2013-09
|
Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification |
|
DIN EN 853:2016-09
|
Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification |
|
DIN EN 15649-7:2010-04
|
FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 7: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS E DEVICES |
|
BWB TL 8415-0309 : 1ED 2006
|
FINGERHANDSCHUH, CHEMIKALIENSCHUTZ FUER PROBENAHMEVORRICHTUNG TPZ-1 ABC |
|
BWB TL 4720-0022 : 2ED 2006
|
|
|
DIN EN 1762:2016-09 (Draft)
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION |
|
DIN EN 877:2010-01
|
Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance (includes Amendment A1:2006 and Corrigendum AC:2008) |
|
DIN EN ISO 22435:2013-03
|
GAS CYLINDERS - CYLINDER VALVES WITH INTEGRATED PRESSURE REGULATORS - SPECIFICATION AND TYPE TESTING (ISO 22435:2007 + AMD.1:2012) |
|
BWB TL 8305-0333 : 3ED 2008
|
WATER VAPOUR PERMEABLE COMPOSITES, TWO AND THREE-LAYER LAMINATED FABRIC FOR SHIPBOARD PARKA, FLAME-RETARDANT, ANTISTATIC |
|
DIN EN 16820:2015-03 (Draft)
|
RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - BONDED ELASTOMERIC HOSES WITH OR WITHOUT A LINING |
|
DIN 51517-2:2014-02
|
LUBRICANTS - LUBRICATING OILS - PART 2: LUBRICATING OILS CL, MINIMUM REQUIREMENTS |
|
DIN 51517-3:2014-02
|
LUBRICANTS - LUBRICATING OILS - PART 3: LUBRICATING OILS CLP, MINIMUM REQUIREMENTS |
|
DIN EN ISO 6808:2014-10
|
PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION (ISO 6808:2014) |
|
DIN EN ISO 14113:2014-02
|
GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013) |
|
DIN EN 682:2006-10
|
Elastomeric seals - Material requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids |
|
DIN EN 856:2016-09
|
RUBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE REINFORCED HYDRAULIC TYPE - SPECIFICATION |
|
BWB TL 8305-0324 : 4ED 2013
|
WATER VAPOUR PERMEABLE COMPOSITES; 3-LAYER LAMINATES FOR GLOVES |
|
BWB TL 9150-0076 : 3ED 2008
|
LUBRICATING OIL, GEAR, EP, ISO VG 320 NATO CODE: NONE BUNDESWEHR CODE: OY1020 |
|
BWB TL 8335-0017 : 3ED 2005
|
RUBBER SOLING MATERIAL FOR FLYING BOOTS |
|
DIN EN ISO 21487:2016-05
|
SMALL CRAFT - PERMANENTLY INSTALLED PETROL AND DIESEL FUEL TANKS (ISO 21487:2012 + AMD 1:2014 + AMD 2:2015) |
|
BWB TL 9330-0012 : 3ED 2006
|
|
|
DIN EN 3826:2015-12
|
AEROSPACE SERIES - FLUOROSILICONE RUBBER (FVMQ) - HARDNESS 70 IRHD |
|
BWB TL 8305-0158 : 6ED 2004
|
TWO-SIDED RUBBER-COATED POLYAMIDE FABRIC |
|
DIN EN 15649-1:2014-06
|
FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
|
DIN ISO 13226:2015-12
|
Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers (ISO 13226:2011) |
|
DIN EN ISO 6806:2015-08 (Draft)
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR USE IN OIL BURNERS - SPECIFICATION (ISO 6806:2017) |
|
DIN EN ISO 6134:2015-10 (Draft)
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR SATURATED STEAM - SPECIFICATION (ISO 6134:2017) |
|
DIN EN 15069:2010-07
|
Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel |
|
DIN EN 16436-1:2016-04
|
RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS |
|
DIN EN ISO 9539:2014-04
|
GAS WELDING EQUIPMENT - MATERIALS FOR EQUIPMENT USED IN GAS WELDING, CUTTING AND ALLIED PROCESSES (ISO 9539:2010 + AMD.1:2013) |
|
DIN ISO 3384-1:2015-12
|
Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression - Part 1: Testing at constant temperature (ISO 3384-1:2011 + Amd.1:2013) |
|
DIN 19704-2:2014-11
|
HYDRAULIC STEEL STRUCTURES - PART 2: DESIGN AND MANUFACTURING |
|
DIN EN 857:2016-09
|
RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED COMPACT TYPE FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
|
DIN EN 854:2016-09
|
RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE REINFORCED HYDRAULIC TYPE - SPECIFICATION |