DIN SPEC 19674-1:2011-02
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Plastics piping systems made from glass fibre reinforced polyethylene (PE-GF) for water supply and for drainage and sewerage under pressure - Part 1: General
Available format(s)
Hardcopy , PDF
Language(s)
English, German
Published date
01-02-2011
Withdrawn date
02-10-2025
Excluding VAT
| DocumentType |
Standard
|
| Pages |
18
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Withdrawn
|
| DIN SPEC 19674-2:2011-02 | Plastics piping systems made from glass fibre reinforced polyethylene (PE-GF) for water supply and for drainage and sewerage under pressure - Part 2: Pipes |
| DIN EN ISO 13479:2010-01 | Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (ISO 13479:2009) |
| DIN EN ISO 1167-1:2006-05 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006) |
| DIN EN ISO 9080:2013-02 | PLASTICS PIPING AND DUCTING SYSTEMS - DETERMINATION OF THE LONG-TERM HYDROSTATIC STRENGTH OF THERMOPLASTICS MATERIALS IN PIPE FORM BY EXTRAPOLATION (ISO 9080:2012) |
| ISO 22314:2006 | Plastics — Glass-fibre-reinforced products — Determination of fibre length |
| DIN EN ISO 1167-2:2006-05 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces (ISO 1167-2:2006) |
| ISO 13953:2001 | Polyethylene (PE) pipes and fittings — Determination of the tensile strength and failure mode of test pieces from a butt-fused joint |
| DIN EN ISO 6259-1:2015-08 | THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL TEST METHOD (ISO 6259-1:2015) |
| DIN EN 12201-1:2011-11 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General |
| ISO 6964:1986 | Polyolefin pipes and fittings — Determination of carbon black content by calcination and pyrolysis — Test method and basic specification |
| DIN EN 637:1994-08 | Plastics piping systems - Glass-reinforced plastics components - Determination of the amounts of constituents using the gravimetric method; German version EN 637:1994 |
| ISO 3:1973 | Preferred numbers — Series of preferred numbers |
| ISO 18553:2002 | Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds |
| DIN EN ISO 3344:1997-08 | REINFORCEMENT PRODUCTS - DETERMINATION OF MOISTURE CONTENT |
| DIN EN ISO 1183-1:2013-04 | PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD (ISO 1183-1:2012) |
| ISO 11414:2009 | Plastics pipes and fittings — Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion |
| DIN EN ISO 15512:2016-06 (Draft) | PLASTICS - DETERMINATION OF WATER CONTENT (ISO 15512:2016) |
| DIN EN ISO 2078:2016-05 | Textile glass - Yarns - Designation (ISO 2078:1993 + Amd 1:2015) (includes Amendment :2015) |
| DIN EN ISO 16871:2003-12 | PLASTICS PIPING AND DUCTING SYSTEMS - PLASTICS PIPES AND FITTINGS - METHOD FOR EXPOSURE TO DIRECT (NATURAL) WEATHERING |
| ISO 1887:2014 | Textile glass — Determination of combustible-matter content |
| ISO 11357-6:2008 | Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) |
| DIN EN ISO 9969:2016-06 | THERMOPLASTICS PIPES - DETERMINATION OF RING STIFFNESS (ISO 9969:2016) |
| ISO 4065:1996 | Thermoplastics pipes — Universal wall thickness table |
| DIN EN 12814-3:2014-07 | TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 3: TENSILE CREEP TEST |
| ISO 497:1973 | Guide to the choice of series of preferred numbers and of series containing more rounded values of preferred numbers |
| ISO 13761:2017 | Plastics pipes and fittings — Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C |
| DIN EN ISO 13967:2010-04 | Thermoplastics fittings - Determination of ring stiffness (ISO 13967:2009) |
| ISO 1888:2006 | Textile glass — Staple fibres or filaments — Determination of average diameter |
| ISO 6259-3:2015 | Thermoplastics pipes — Determination of tensile properties — Part 3: Polyolefin pipes |
| DIN EN ISO 12162:2010-04 | Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient (ISO 12162:2009) |
| DIN EN ISO 1133:2005-09 | PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.