DIN VDE 0281-1 : 2003

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View superseded by

CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING THERMOPLASTIC INSULATION - PART 1: GENERAL REQUIREMENTS

Available format(s):

Superseded date: 01-01-2012

Language(s):

Published date: 12-01-2013

Publisher: German Institute for Standardisation (Deutsches Institut für Normung)

Table of Contents - (Show below) - (Hide below)

Vorwort
1 Allgemeines
  1.1 Anwendungsbereich
  1.2 Zweck
  1.3 Gemeinsame Kennzeichnung
2 Definitionen
  2.1 Definitionen für Isolier- und Mantelmischungen
  2.2 Definitionen für Prüfverfahren
  2.3 Nennspannung
3 Kennzeichnung
  3.1 Ursprungskennzeichnung
  3.2 Kennzeichenfolge
  3.3 Beständigkeit
  3.4 Lesbarkeit
  3.5 Gemeinsame Kennzeichnung
  3.6 Verwendung des Wortes CENELEC
4 Aderkennzeichnung
  4.1 Allgemeine Anforderungen
  4.2 Farbschema
  4.3 Farbkombination grün-gelb
  4.4 Aderkennzeichnung flexibler Leitungen durch
      Aufdruck
5 Allgemeine Anforderungen an den Aufbau der Leitungen
  5.1 Leiter
  5.2 Isolierhülle
  5.3 Zwickelfüllung
  5.4 Extrudierte gemeinsame Aderumhüllung
  5.5 Mantel
  5.6 Prüfungen an dervollständigen Leitung
6 Hinweise für die Verwendung
Anhang A (normativ) Normative Verweisungen auf
         internationale Publikationen mit ihren
         entsprechenden europäischen Publikationen
Anhang B (informativ) Nationale Kennzeichnung

Abstract - (Show below) - (Hide below)

HD 21 gilt für Leitungen für feste Verlegung und flexible Leitungen mit Isolierhülle und, sofern vorhanden, Mantel aus Kunststoff auf der Basis von Polyvinylchlorid und mit Nennspannungen U[0]/U bis 450/750 V für Starkstromanlagen mit Nennwechselspannungen bis 450/750 V. ANMERKUNG: Für einige flexible Leitungen wird die Definition 'Schnur' verwendet. Teil 1 legt die allgemeinen Anforderungen für diese Leitungen fest. Die vorgeschriebenen Prüfverfahren sind in Teil 2 dieses HD, in HD 405.1 und EN 60811 angegeben. Die einzelnen Leitungsbauarten sind in Teil 3 und den folgenden Teilen dieses HD festgelegt (nachfolgend Aufbaunormen genannt). Die Typkurzzeichen der Leitungen entsprechen HD 361.

General Product Information - (Show below) - (Hide below)

Document Type	Standard
ISBN
Pages
Published
Publisher	German Institute for Standardisation (Deutsches Institut für Normung)
Status	Superseded
Superseded By	DIN EN 50525-1 : 2012

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
HD 21.1 : 200S4	Corresponds
VDE 0281-1 : 2003	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

DIN 47732:1986-07	CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATION - PVC-SHEATHED FLEXIBLE CABLE 05VV AND 05VVH2 - DIMENSIONS, DESIGNATION, WEIGHTS AND PACKAGING-REQUIREMENT
DIN VDE 0281-403 : 1989	PVC-CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATION - FLAT PVC-SHEATHED FLEXIBLE CABLE 05VVH6
DIN VDE 0281-3 : 2001 AMD 2 2009	POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 3: NON SHEATHED CABLES FOR FIXED WIRING
VDE 0281-10 : 2003	POLYVINYLCHLORID-ISOLIERTE STARKSTROMLEITUNGEN MIT NENNSPANNUNGEN BIS 450/750 V WENDELLEITUNGEN
VDE 0630 : 1992	SWITCHES FOR APPLIANCES FOR A RATED VOLTAGE NOT EXCEEDING 500 V AND A RATED CURRENT NOT EXCEEDING 63 A
DIN EN 1870-16:2013-01	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING
DIN EN 81-2:2000-05	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS
VDE 0281-103 : 1985	PVC-CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATION - PVC SINGLE-CORE NON-SHEATHED CABLE
VDE 0634-1 : 1987	UNDERFLOOR ELECTRICAL INSTALLATION - SERVICE UNITS
DIN EN 1807:2010-02	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES
DIN EN 1870-14:2012-06	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES
DIN EN 1218-1:2010-02	Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table (includes Amendment A1:2009)
DIN EN 1218-4:2009-12	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S)
DIN EN 1870-1:1999-07	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
DIN EN 1218-3:2009-12	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS
DIN EN 1807:1999-10	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES
VDE 0281-3 : 2001 AMD 2 2009	POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 3: NON SHEATHED CABLES FOR FIXED WIRING
VDE 0250-204 : 2000
VDE 0281-8 : 2000	POLYVINYL CHLORIDE INSULATED CABLES OF NOMINAL VOLTAGES UP TO AND INCLUDING 450/750 V - PART 8: SINGLE CORE NON-SHEATHED CABLES FOR DECORATIVE CHAINS
VDE 0620 : 1992	PLUGS AND SOCKET-OUTLETS UP TO 400 V, 25 A
VDE 0281-403 : 1989	PVC-CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATION - FLAT PVC-SHEATHED FLEXIBLE CABLE 05VVH6
DIN VDE 0281-8 : 2000	POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 8: SINGLE CORE NON-SHEATHED CABLES FOR DECORATIVE CHAINS
VDE 0281-302 : 1985	PVC-CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATIONS - FLAT TWIN FLEXIBLE CORD
DIN VDE 0281-301 : 1985	PVC CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATION - FLAT TWIN TINSEL CORD
VDE 0281-301 : 1985	PVC-CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATIONS - FLAT TWIN TINSEL CORD
DIN VDE 0281-404 : 1989	PVC CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATION - FLAT PVC-SHEATHED FLEXIBLE CABLE 07VVH6
DIN VDE 0281-402 : 1988	PVC-CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATIONS - PVC-SHEATHED FLEXIBLE CORD 05VV
VDE 0281-402 : 1988	PVC-CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATIONS - PVC-SHEATHED FLEXIBLE CORD 05VV
VDE 0281-9 : 2001	POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 9: SINGLE CORE NON-SHEATHED CABLES FOR INSTALLATION AT LOW TEMPERATURES
DIN VDE 0281-302 : 1985	PVC CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATION - FLAT TWIN FLEXIBLE CORD
DIN VDE 0634-1 : 1987	UNDERFLOOR ELECTRICAL INSTALLATION - SERVICE UNITS
DIN VDE 0281-7 : 2001	POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - SINGLE CORE NON-SHEATHED CABLES FOR INTERNAL WIRING FOR CONDUCTOR TEMPERATURE OF 90 DEGREE C POUR FILERIE INTERNE
DIN EN 1870-1:2009-08	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
DIN EN 81-2:2010-08	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS
DIN VDE 0250-204 : 2000	CABLES, WIRES AND CORDS FOR POWER INSTALLATION - PVC-INSTALLATION CABLE NYM
VDE 0281-404 : 1989	PVC-CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATIONS - FLAT PVC-SHEATHED FLEXIBLE CABLE 07VVH6
VDE 0281-7 : 2001	POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 7: SINGLE CORE NON-SHEATHED CABLES FOR INTERNAL WIRING FOR CONDUCTOR TEMPERATURE OF 90 DEGREES C
DIN VDE 0281-103 : 1985	PVC-CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATION - PVC SINGLE-CORE NON-SHEATHED CABLE
DIN VDE 0630 : 1992	SWITCHES FOR APPLIANCES FOR A RATED VOLTAGE NOT EXCEEDING 500 V AND A RATED CURRENT NOT EXCEEDING 63 A
DIN EN 1870-4:2012-06	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
DIN EN 1218-5:2010-02	Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or feed chain (includes Amendment A1:2009)
DIN EN 81-3:2011-06	Safety rules for the construction und installation of lifts - Part 3: Electric and hydraulic service lifts (includes Amendment A1:2008 + Corrigendum AC:2009)
DIN EN 81-1:2000-05	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS
DIN EN 81-1:2010-06	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart