EI BLUE BOOK : 3ED 2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
DESIGN, CONSTRUCTION, MODIFICATION, MAINTENANCE AND DECOMMISSIONING OF FILLING STATIONS
11-10-2018
12-01-2013
Foreword
Acknowledgements
1 Scope
2 Risk assessment
3 Hazardous area classification
4 Planning and design
5 Acceptance and verification/commissioning
6 Construction and construction safety
7 Storage and dispensing of autogas
8 Containment systems
9 Dispensers and control equipment
10 Vapour recovery systems
11 Leak containment and leak detection systems
12 Canopies and buildings
13 Drainage systems
14 Electrical installations
15 Decommissioning
Annexes
Annex 2.1 - Hazardous characteristics of petrol
Annex 2.2 - Hazardous characteristics of diesel
Annex 2.3 - Characteristics of autogas
Annex 2.4 - Biofuels
Annex 2.5 - AUS32 (diesel exhaust fluid)
Annex 6.1 - Model safety method statement format
Annex 6.2 - Model permit-to-work format
Annex 6.3 - Model hot work permit format
Annex 8.1 - Containment systems figures
Annex 8.2 - Small (movable) refuelling units
Annex 10.1 - Conversion to Stage 1b and Stage 2 vapour
recovery
Annex 10.2 - Assessment checks prior to conversion of
existing sites
Annex 10.3 - Commissioning and periodic testing/maintenance
of Stage 1b system
Annex 14.1 - Guidance for periodic inspection and testing of
electrical installations
Annex 14.2 - Conductor resistances
Annex 14.3 - Explanatory notes on PME supplies at filling
stations
Annex 14.4 - Notes on measuring earth electrode resistance,
earth fault loop impedance and prospective fault
current and test socket outlet provisions
Annex 14.5A - Model certificate of electrical inspection and
testing for statutory enforcement purposes
Annex 14.5B - Model defect report for an electrical installation
at a filling station for statutory enforcement
purposes
Annex 14.6 - Pre-commissioning test record
Annex 14.7 - Inventory checklist
Annex 14.8 - Model filling station electrical installation
certificate
Annex 14.9 - Model filling station electrical periodic
inspection report
Annex 14.10 - Model electrical danger notification
Annex 14.11 - Explanatory notes on equipment protection
levels
Annex 14.12 - Safety signs and safety information notices
Annex A - Abbreviations
Annex B - Glossary of terms
Annex C - References
Provides information about storage and dispensing of petroleum products used as fuels for motor vehicles (including petrol, diesel and autogas (also known as LPG). Also provides information on civil, mechanical, hydraulic and electrical installation issues for the planning, design, construction, commissioning, modification, maintenance and decommissioning of filling stations, together with information aimed to minimise the risks from fire and explosion, to health and to the environment.
| DevelopmentNote |
Jointly published by the APEA and Energy Institute. (06/2011)
|
| DocumentType |
Standard
|
| PublisherName |
Energy Institute (formerly Institute of Petroleum - IP)
|
| Status |
Superseded
|
| SupersededBy |
| EI GUID. STORAGE AND HANDLING BIOFUELS : 1ED 2017 | GUIDANCE FOR THE STORAGE AND HANDLING OF BIOFUELS AT FILLING STATIONS |
| EI Model code of safe practice Part 15:2015 | MODEL CODE OF SAFE PRACTICE - PART 15: AREA CLASSIFICATION FOR INSTALLATIONS HANDLING FLAMMABLE FLUIDS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.