DIN EN 10149-1:2013-12
|
HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
UNE-EN 10363:2016
|
Continuously hot-rolled patterned steel strip and plate/sheet cut from wide strip - Tolerances on dimensions and shape |
I.S. EN 12079-1:2006
|
OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 1: OFFSHORE CONTAINERS - DESIGN, MANUFACTURE AND MARKING |
I.S. EN ISO 14713-2:2009
|
ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 2: HOT DIP GALVANIZING |
16/30338590 DC : 0
|
BS EN 10164 - STEEL PRODUCTS WITH IMPROVED DEFORMATION PROPERTIES PERPENDICULAR TO THE SURFACE OF THE PRODUCT - TECHNICAL DELIVERY CONDITIONS |
08/30190326 DC : DRAFT DEC 2008
|
BS EN 10225 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
15/30318676 DC : 0
|
BS EN 10056-1 - STRUCTURAL STEEL EQUAL AND UNEQUAL LEG ANGLES - PART 1: DIMENSIONS |
PREN 10225-4 : DRAFT 2017
|
WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS |
09/30202029 DC : 0
|
BS EN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES |
09/30156692 DC : 0
|
BS EN 10029 - HOT-ROLLED STEEL PLATES 3 MM THICK OR ABOVE - TOLERANCES ON DIMENSIONS AND SHAPE |
UNE-EN 1993-1-8:2013
|
Eurocode 3: Design of steel structures - Part 1-8: Design of joints |
09/30187535 DC : 0
|
BS EN 13000 - CRANES - MOBILE CRANES |
PREN 10051 : DRAFT 2009
|
HOT-ROLLED STRIP AND PLATE/SHEET CUT FROM WIDE STRIP OF NON-ALLOY AND ALLOY STEELS - TOLERANCES ON DIMENSIONS AND SHAPE |
UNE-EN 1994-1-1:2013
|
Eurocode 4: Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings |
I.S. CEN ISO TR 20172:2006
|
WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS |
S.R. CEN TS 13001-3-5:2010
|
CRANES - GENERAL DESIGN - PART 3-5: LIMIT STATES AND PROOF OF COMPETENCE OF FORGED HOOKS |
I.S. EN 10363:2016
|
CONTINUOUSLY HOT-ROLLED PATTERNED STEEL STRIP AND PLATE/SHEET CUT FROM WIDE STRIP - TOLERANCES ON DIMENSIONS AND SHAPE |
17/30346735 DC : 0
|
BS EN 10225-3 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 3: HOT FINISHED HOLLOW SECTIONS |
I.S. EN 13000:2010
|
Cranes - Mobile cranes |
BS EN 13001-3-1 : 2012
|
CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE |
UNI EN 13001-3-1 : 2013
|
CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE |
DIN EN 1994-1-1:2010-12
|
Eurocode 4: Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings (includes Corrigendum AC:2009) |
BS EN 13000 : 2010
|
CRANES - MOBILE CRANES |
14/30278953 DC : 0
|
BS ISO 17842-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE |
I.S. EN 14276-1:2006
|
PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
BS EN 1993-1-1 : 2005
|
EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
BS EN 15272-4:2007
|
Inland navigation vessels. Equipment for rope leading Rope lead |
BS EN 10029:2010
|
Hot-rolled steel plates 3 mm thick or above. Tolerances on dimensions and shape |
BS EN 10238:2009
|
Automatically blast-cleaned and automatically prefabrication primed structural steel products |
EN 10149-1:2013
|
Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions |
EN 10219-1:2006
|
Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
EN 10210-1:2006
|
Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
EN 10025-1:2004
|
Hot rolled products of structural steels - Part 1: General technical delivery conditions |
EN 10363:2016
|
Continuously hot-rolled patterned steel strip and plate/sheet cut from wide strip - Tolerances on dimensions and shape |
EN 10238:2009
|
Automatically blast-cleaned and automatically prefabrication primed structural steel products |
DIN EN 10238:2009-10
|
AUTOMATICALLY BLAST-CLEANED AND AUTOMATICALLY PREFABRICATION PRIMED STRUCTURAL STEEL PRODUCTS |
DIN EN 1090-2:2011-10
|
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
EN 13001-3-1:2012+A2:2018
|
Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure |
EN 12693:2008
|
Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors |
I.S. EN 1994-1-2:2005
|
EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
DIN EN ISO 14713-2 E : 2010
|
ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 2: HOT DIP GALVANIZING |
13/30285283 DC : 0
|
BS EN 13001-3-5 - CRANES - GENERAL DESIGN - PART 3-5: LIMIT STATE AND PROOF OF COMPETENCE OF FORGED HOOKS |
08/30190329 DC : DRAFT DEC 2008
|
BS EN 10238 - AUTOMATICALLY BLAST-CLEANED AND AUTOMATICALLY PREFABRICATION PRIMED STRUCTURAL STEEL PRODUCTS |
PREN 10164 : DRAFT 2016
|
STEEL PRODUCTS WITH IMPROVED DEFORMATION PROPERTIES PERPENDICULAR TO THE SURFACE OF THE PRODUCT - TECHNICAL DELIVERY CONDITIONS |
11/30235009 DC : 0
|
BS EN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES |
ISO 630-3:2012
|
Structural steels Part 3: Technical delivery conditions for fine-grain structural steels |
UNE-EN 1993-1-1:2013
|
Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings |
PREN 1090-2 : DRAFT 2015
|
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
BS EN 15551:2017
|
Railway applications. Railway rolling stock. Buffers |
BS EN 12693:2008
|
Refrigerating systems and heat pumps. Safety and environmental requirements. Positive displacement refrigerant compressors |
09/30200092 DC : 0
|
BS EN 10051 - HOT-ROLLED STRIP AND PLATE/SHEET CUT FROM WIDE STRIP OF NON-ALLOY AND ALLOY STEELS - TOLERANCES ON DIMENSIONS AND SHAPE |
PREN 10029 : DRAFT 2009
|
HOT-ROLLED STEEL PLATES 3 MM THICK OR ABOVE - TOLERANCES ON DIMENSIONS AND SHAPE |
UNE-EN 1090-2:2011
|
Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
UNE-EN 1994-2:2013
|
Eurocode 4 - Design of composite steen and concrete structures - Part 2: General rules and rules for bridges |
I.S. EN 13001-3-1:2012
|
CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE |
DIN EN 14592 E : 2012
|
TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS |
BS EN 14592 : 2008
|
TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS |
EN 10164:2004
|
Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions |
17/30346741 DC : 0
|
BS EN 10225-1 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 1: PLATES |
UNE-EN 10365:2018
|
Hot rolled steel channels, I and H sections - Dimensions and masses |
UNE-EN 1993-1-3:2012
|
Eurocode 3 - Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting |
UNI EN ISO 14713-2 : 2010
|
ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 2: HOT DIP GALVANIZING |
BS EN 1090-2 : 2008
|
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
DIN EN 1090-2:2015-07 (Draft)
|
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
UNI EN 1090-2 : 2011
|
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
I.S. EN 1993-1-1:2005
|
EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
DIN EN 13000:2014-11
|
CRANES - MOBILE CRANES |
DIN EN 1993-1-3:2010-12
|
Eurocode 3: Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting (includes Corrigendum AC:2009) |
DIN EN 1993-1-8:2010-12
|
Eurocode 3: Design of steel structures - Part 1-8: Design of joints (includes Corrigendum AC:2009) |
I.S. EN 10029:2010
|
HOT-ROLLED STEEL PLATES 3 MM THICK OR ABOVE - TOLERANCES ON DIMENSIONS AND SHAPE |
I.S. EN 1994-2:2005
|
EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 2: GENERAL RULES AND RULES FOR BRIDGES (INCLUDING IRISH NATIONAL ANNEX) |
I.S. EN 13852-1:2013
|
CRANES - OFFSHORE CRANES - PART 1: GENERAL - PURPOSE OFFSHORE CRANES |
DIN EN 10210-1:2006-07
|
Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
I.S. EN 1994-1-1:2005
|
EUROCODE 4: DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS (INCLUDING IRISH NATIONAL ANNEX) |
UNE-EN 10238:2011
|
Automatically blast-cleaned and automatically prefabrication primed structural steel products |
I.S. EN 10149-1:2013
|
HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
I.S. EN 10219-1:2006
|
COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
I.S. EN 14394:2006
|
HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
I.S. EN 10210-1:2006
|
HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
I.S. EN 10238:2009
|
AUTOMATICALLY BLAST-CLEANED AND AUTOMATICALLY PREFABRICATION PRIMED STRUCTURAL STEEL PRODUCTS |
DIN EN 10025-1:2005-02
|
Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version EN 10025-1:2004 |
UNI EN 10029 : 2011
|
Hot rolled steel sheets with a thickness greater than or equal to 3 mm - Tolerances on dimensions and shape |
16/30332608 DC : DRAFT JAN 2016
|
BS EN 10210-2 - HOT FINISHED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS |
UNI EN 12693 : 2008
|
REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
11/30215307 DC : 0
|
BS ISO 630-3 - STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR FINE GRAINED STRUCTURAL STEELS |
BS EN 10363:2016
|
Continuously hot-rolled patterned steel strip and plate/sheet cut from wide strip. Tolerances on dimensions and shape |
CEN ISO/TR 20172:2009
|
Welding - Grouping systems for materials - European materials (ISO/TR 20172:2009) |
DIN EN 10363 E : 2016
|
CONTINUOUSLY HOT-ROLLED PATTERNED STEEL STRIP AND PLATE/SHEET CUT FROM WIDE STRIP - TOLERANCES ON DIMENSIONS AND SHAPE |
I.S. EN 10365:2017
|
HOT ROLLED STEEL CHANNELS, I AND H SECTIONS - DIMENSIONS AND MASSES |
15/30318326 DC : 0
|
BS EN 16828 - HOT ROLLED STEEL CHANNELS, I AND H SECTIONS - DIMENSIONS AND MASSES |
EN 13001-3-5:2016
|
Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks |
13/30279826 DC : 0
|
BS EN 15551 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
05/30132920 DC : DRAFT APR 2005
|
EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR THE EXECUTION OF STEEL STRUCTURES |
EN 115-1:2017
|
Safety of escalators and moving walks - Part 1: Construction and installation |
UNI EN 14592 : 2012
|
TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS |
UNI EN 15272-4 : 2008
|
INLAND NAVIGATION VESSELS - EQUIPMENT FOR ROPE LEADING - PART 4: ROPE LEAD |
BS EN ISO 14713-2:2009
|
Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structures Hot dip galvanizing |
PD CEN ISO/TR 20172:2009
|
Welding. Grouping systems for materials. European materials |
DIN EN 13001-3-1:2013-12
|
CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE |
I.S. EN 115-1:2017
|
SAFETY OF ESCALATORS AND MOVING WALKS - PART 1: CONSTRUCTION AND INSTALLATION |
PREN 10210-2 : DRAFT 2016
|
HOT FINISHED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS |
ISO 10855-1:2018
|
Offshore containers and associated lifting sets Part 1: Design, manufacture and marking of offshore containers |
I.S. EN 10164:2005
|
STEEL PRODUCTS WITH IMPROVED DEFORMATION PROPERTIES PERPENDICULAR TO THE SURFACE OF THE PRODUCT - TECHNICAL DELIVERY CONDITIONS |
BS EN 10056-1:2017
|
Structural steel equal and unequal leg angles Dimensions |
UNE-EN 10029:2011
|
Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape |
UNE-EN 10056-1:2017
|
Structural steel equal and unequal leg angles - Part 1: Dimensions |
CEN/TR 10347:2006
|
Guidance for forming of structural steels in processing |
I.S. EN 15551:2017
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
ISO 630-6:2014
|
Structural steels — Part 6: Technical delivery conditions for seismic-improved structural steels for building |
UNE-EN ISO 14713-2:2011
|
Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 2: Hot dip galvanizing (ISO 14713-2:2009) |
ISO/TR 14799-1:2015
|
Comparison of worldwide escalator and moving walk safety standards Part 1: Rule by rule comparison |
EN 1090-2:2008+A1:2011
|
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
ISO 17842-1:2015
|
Safety of amusement rides and amusement devices — Part 1: Design and manufacture |
I.S. EN 10225:2009
|
WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
EN ISO 14713-2:2009
|
Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 2: Hot dip galvanizing (ISO 14713-2:2009) |
DIN EN 15272-4:2007-12
|
Inland navigation vessels - Equipment for rope leading - Part 4: Rope lead |
DIN EN 14276-1:2011-05
|
PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
DIN EN 1994-2:2010-12
|
Eurocode 4: Design of composite steel and concrete structures - Part 2: General rules and rules for bridges (includes Corrigendum AC:2008) |
DIN EN 14394 E : 2008
|
HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
DIN EN 14394:2008-12
|
HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
BS EN 1993-1-3:2006
|
Eurocode 3. Design of steel structures General rules - Supplementary rules for cold-formed members and sheeting |
EN 14276-1:2020
|
Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements |
UNI EN 14276-1 : 2011
|
PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
UNE-EN 10225:2010
|
Weldable structural steels for fixed offshore structures - Technical delivery conditions |
UNI EN 10225 : 2009
|
WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
UNI EN 10238 : 2009
|
AUTOMATICALLY BLAST-CLEANED AND AUTOMATICALLY PREFABRICATION PRIMED STRUCTURAL STEEL PRODUCTS |
UNI EN 14394 : 2008
|
HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREES C |
UNI EN 10219-1 : 2006
|
COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
UNI EN 1994-2 : 2006
|
EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 2: GENERAL RULES AND RULES FOR BRIDGES |
UNI EN 1993-1-3 : 2007
|
EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-3: GENERAL RULES - SUPPLEMENTARY RULES FOR COLD-FORMED MEMBERS AND SHEETING |
UNI EN 1994-1-2 : 2014
|
EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
UNI EN 10051 : 2011
|
CONTINUOUSLY HOT-ROLLED STRIP AND PLATE/SHEET CUT FROM WIDE STRIP OF NON-ALLOY AND ALLOY STEELS - TOLERANCES ON DIMENSIONS AND SHAPE |
UNI EN 1993-1-8 : 2005
|
EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-8: DESIGN OF JOINTS |
UNI EN 13852-1 : 2013
|
CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES |
UNI EN 13000 : 2014
|
CRANES - MOBILE CRANES |
UNI EN 1994-1-1 : 2005
|
EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
UNI EN 1993-1-1 : 2014
|
EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
UNI EN 10149-1 : 2013
|
HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
DD CEN/TS 13001-3-5:2010
|
Cranes. General design Limit states and proof of competence of forged hooks |
DIN EN 10365 E : 2017
|
HOT ROLLED STEEL CHANNELS, I AND H SECTIONS - DIMENSIONS AND MASSES |
08/30181655 DC : DRAFT SEP 2008
|
BS EN 13001-3-1 - CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES |
17/30346738 DC : 0
|
BS EN 10225-2 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 2: SECTIONS |
I.S. EN 10025-1:2004
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
17/30351224 DC : 0
|
BS EN 14276-1 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
DIN EN 10056-1:2017-06
|
STRUCTURAL STEEL EQUAL AND UNEQUAL LEG ANGLES - PART 1: DIMENSIONS |
15/30320416 DC : 0
|
BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
DIN EN 10210-1:2016-01 (Draft)
|
Hot finished structural steel hollow sections - Part 1: General; German and English version prEN 10210-1:2016 |
DIN EN 14592:2012-07
|
Timber structures - Dowel-type fasteners - Requirements (includes Amendment A1:2012) |
PREN 14592 : DRAFT 2017
|
TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS |
15/30331856 DC : 0
|
BS EN ISO 10855-1 - OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 1: OFFSHORE CONTAINER - DESIGN, MANUFACTURE AND MARKING |
I.S. EN 10056-1:2017
|
STRUCTURAL STEEL EQUAL AND UNEQUAL LEG ANGLES - PART 1: DIMENSIONS |
DIN EN 10365:2017-05
|
Hot rolled steel channels, I and H sections - Dimensions and masses; English version EN 10365: 2017 |
UNE-EN 14592:2009
|
Timber structures - Dowel-type fasteners - Requirements |
I.S. EN 12693:2008
|
REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
XP CEN/TS 13001-3-5 : 2010 XP
|
CRANES - GENERAL DESIGN - PART 3-5: LIMIT STATES AND PROOF OF COMPETENCE FOR FORGED HOOKS |
PREN 13852-1 : DRAFT 2011
|
CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES |
NF EN 1090-2 : 2009 + A1 2011
|
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
UNE-EN 15551:2017
|
Railway applications - Railway rolling stock - Buffers |
DIN EN 12693:2016-10 (Draft)
|
REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
ISO/TR 14799-2:2015
|
Comparison of worldwide escalator and moving walk safety standards — Part 2: Abbreviated comparison and comments |
I.S. EN 14592:2008
|
TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS |
S.R. CEN ISO TR 20172:2009
|
WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS |
NF EN 10225 : 2009
|
WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
DIN EN 10029:2011-02
|
Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape |
DIN EN 10225:2009-10
|
WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
DIN EN 13852-1:2014-01
|
Cranes - Offshore cranes - Part 1: General-purpose offshore cranes |
DIN EN 10219-1:2016-01 (Draft)
|
Cold formed welded structural steel hollow sections - Part 1: General; German and English version prEN 10219-1:2016 |
ISO 14713-2:2009
|
Zinc coatings Guidelines and recommendations for the protection against corrosion of iron and steel in structures Part 2: Hot dip galvanizing |
BS EN 14394 : 2005
|
HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
BS EN 10025-1:2004
|
Hot rolled products of structural steels General technical delivery conditions |
BS ISO 17842-1:2015
|
Safety of amusement rides and amusement devices Design and manufacture |
BS EN 1994-2:2005
|
Eurocode 4. Design of composite steel and concrete structures General rules and rules for bridges |
15/30324856 DC : 0
|
BS EN 115-1 - SAFETY OF ESCALATORS AND MOVING WALKS - PART 1: CONSTRUCTION AND INSTALLATION |
EN 14276-1:2006+A1:2011
|
Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements |
BS EN 14276-1 : 2006
|
PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
PD ISO/TR 14799-2:2005
|
Comparison of worldwide escalator and moving walk safety standards Abbreviated comparison and comments |
BS EN 1994-1-2 : 2005
|
EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
BS EN 1993-1-8:2005
|
Eurocode 3. Design of steel structures Design of joints |
BS EN 1994-1-1:2004
|
Eurocode 4. Design of composite steel and concrete structures General rules and rules for buildings |
UNE-EN 13000:2010
|
Cranes - Mobile cranes |
UNE-EN 10149-1:2014
|
Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions |
UNE-EN 13852-1:2014
|
Cranes - Offshore cranes - Part 1: General-purpose offshore cranes |
BS EN 10149-1:2013
|
Hot rolled flat products made of high yield strength steels for cold forming General technical delivery conditions |
EN 14592:2008+A1:2012
|
Timber structures - Dowel-type fasteners - Requirements |
EN 1994-1-1:2004/AC:2009
|
EUROCODE 4: DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
EN 10225:2009
|
Weldable structural steels for fixed offshore structures - Technical delivery conditions |
EN 14394:2005+A1:2008
|
Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C |
EN 1994-2:2005/AC:2008
|
EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 2: GENERAL RULES AND RULES FOR BRIDGES |
EN 1993-1-3:2006/AC:2009
|
EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-3: GENERAL RULES - SUPPLEMENTARY RULES FOR COLD-FORMED MEMBERS AND SHEETING |
EN 15551:2017
|
Railway applications - Railway rolling stock - Buffers |
EN 1993-1-8:2005/AC:2009
|
EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-8: DESIGN OF JOINTS |
EN 13852-1:2013
|
Cranes - Offshore cranes - Part 1: General-purpose offshore cranes |
EN 1993-1-1:2005/A1:2014
|
EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
EN 1994-1-2:2005/A1:2014
|
EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
EN 15272-4:2007
|
Inland navigation vessels - Equipment for rope leading - Part 4: Rope lead |
I.S. EN 1993-1-3:2006
|
EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-3: GENERAL RULES - SUPPLEMENTARY RULES FOR COLD-FORMED MEMBERS AND SHEETING (INCLUDING IRISH NATIONAL ANNEX) |
DIN EN 10363:2016-10
|
CONTINUOUSLY HOT-ROLLED PATTERNED STEEL STRIP AND PLATE/SHEET CUT FROM WIDE STRIP - TOLERANCES ON DIMENSIONS AND SHAPE |
PREN 10056-1 : DRAFT 2015
|
STRUCTURAL STEEL EQUAL AND UNEQUAL LEG ANGLES - PART 1: DIMENSIONS |
S.R. CEN ISO/TR 20172:2021
|
Welding - Grouping systems for materials - European materials (ISO/TR 20172:2021) |
BS EN 13001-3-5:2016
|
Cranes. General design Limit states and proof of competence of forged hooks |
BS EN 10365:2017
|
Hot rolled steel channels, I and H sections. Dimensions and masses |
EN 12079-1 : 2006
|
OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 1: OFFSHORE CONTAINERS - DESIGN, MANUFACTURE AND MARKING |
PREN 10238 : DRAFT 2008
|
AUTOMATICALLY BLAST-CLEANED AND AUTOMATICALLY PREFABRICATION PRIMED STRUCTURAL STEEL PRODUCTS |
DD CEN/TR 10347:2006
|
Guidance for forming of structural steels in processing |
PREN 10219-2 : DRAFT 2016
|
COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS |
PREN 14276-1 : DRAFT 2017
|
PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
I.S. EN 1090-2:2008
|
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
KTA 3205.2 : 2015 COR 2016
|
COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS - PART 2: COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS FOR PRESSURE AND ACTIVITY-RETAINING COMPONENTS IN SYSTEMS OUTSIDE THE PRIMARY CIRCUIT |
UNE-EN 1994-1-2:2016
|
Eurocode 4 - Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design. |
BS EN 115-1:2017
|
Safety of escalators and moving walks Construction and installation |
DIN EN 10164:2016-04 (Draft)
|
STEEL PRODUCTS WITH IMPROVED DEFORMATION PROPERTIES PERPENDICULAR TO THE SURFACE OF THE PRODUCT - TECHNICAL DELIVERY CONDITIONS |
17/30346732 DC : 0
|
BS EN 10225-4 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS |
16/30332614 DC : 0
|
BS EN 10219-2 - COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS |
BS EN 10164:2004
|
Steel products with improved deformation properties perpendicular to the surface of the product. Technical delivery conditions |
EN 13000:2010+A1:2014
|
Cranes - Mobile cranes |
DIN EN 1993-1-1:2010-12
|
Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings (includes Corrigendum AC:2009) |
I.S. CEN TR 10347:2006
|
GUIDANCE FOR FORMING OF STRUCTURAL STEELS IN PROCESSING |
DIN EN 1994-1-2:2010-12
|
Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design (includes Corrigendum AC:2008) |
DIN EN 10025-1:2011-04 (Draft)
|
Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version prEN 10025-1:2011 |
BS EN 12079-1:2006
|
Offshore containers and associated lifting sets Offshore containers. Design, manufacture and marking |
BS EN 10210-1:2006
|
Hot finished structural hollow sections of non-alloy and fine grain steels Technical delivery requirements |
BS EN 10225:2009
|
Weldable structural steels for fixed offshore structures. Technical delivery conditions |
BS EN 13852-1:2013
|
Cranes. Offshore cranes General-purpose offshore cranes |
PD ISO/TR 14799-1:2005
|
Comparison of worldwide escalator and moving walk safety standards Rule by rule comparison |
BS EN 10219-1:2006
|
Cold formed welded structural hollow sections of non-alloy and fine grain steels Technical delivery requirements |
ISO/TR 20172:2009
|
Welding Grouping systems for materials European materials |
DIN EN 12693:2008-09
|
REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
DIN EN ISO 14713-2:2010-05
|
ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 2: HOT DIP GALVANIZING |
CEN/TS 13001-3-5:2010
|
Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks |
DIN EN 10056-1:1998-10
|
STRUCTURAL STEEL EQUAL AND UNEQUAL LEG ANGLES - PART 1: DIMENSIONS |
EN 10365:2017
|
Hot rolled steel channels, I and H sections - Dimensions and masses |
DIN EN 10219-1:2006-07
|
Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
EN 10029:2010
|
Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape |
UNE-EN 14276-1:2007
|
Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements |