EN 10028-1:2017

Current

Current The latest, up-to-date edition.

Flat products made of steels for pressure purposes - Part 1: General requirements

Available format(s):

Language(s):

Published date: 26-07-2017

Publisher: Comite Europeen de Normalisation

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Tolerances on dimensions
5 Calculation of mass
6 Classification and designation
7 Information to be supplied by the purchaser
8 Requirements
9 Inspection
10 Sampling
11 Test methods
12 Marking
Annex A (informative) - Changes to the previous version
        EN 10028-1:2007+A1:2009
Annex ZA (informative) - Relationship between this
         European Standard and the Essential
         Requirements of EU Directive 2014/68/EU
aimed to be covered

Abstract - (Show below) - (Hide below)

This European Standard specifies general technical delivery conditions for flat products for the construction of pressure equipment.The general technical delivery conditions in EN 10021 also apply.NOTEOnce this European Standard is published in the EU Official Journal (OJEU) under Directive 2014/68/EU, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 2014/68/EU is limited to technical data of materials in this European Standard (Part 1 and the other relevant part of the series) and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 2014/68/EU are satisfied, needs to be done.

General Product Information - (Show below) - (Hide below)

Development Note	Supersedes NFA 36 207. Supersedes EURONORM 28. (07/2004) Supersedes PREN 10028-1. (07/2017)
Document Type	Standard
ISBN
Pages
Published
Publisher	Comite Europeen de Normalisation
Status	Current
Supersedes	NFA 36 205 : 1982 NFA 36 206 : 1983 PREN 10028-1 : DRAFT 2014 NFA 36 207 : 1982 EURONORM 28 : 1986

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
BS EN 10028-1:2017	Identical
NBN EN 10028-1 : 2008 + A1 2009	Identical
SN EN 10028-1 : 2008 CORR 2010	Identical
SS-EN 10028-1:2017	Identical
NBN EN 286-2 : 1993	Identical
NBN EN 10028-4 : 2009	Identical
UNE-EN 10028-1:2017	Identical
UNE-EN 10028-1:2009	Identical
UNI EN 10028-1 : 2009	Identical
NS EN 10028-1 : 2017	Identical
NEN EN 10028-1 : 2017	Identical
NF EN 10028-1 : 2017	Identical
PN EN 10028-1 : 2017	Identical
I.S. EN 10028-1:2017	Identical
SANS 50028-1 : 1ED 2004	Identical
UNI EN 10028-1:2017	Identical
DIN EN 10028-1:2017-10	Identical
DIN 17155-1:1959-01	Similar to

Standards Referenced By This Book - (Show below) - (Hide below)

10/30216705 DC : 0	BS EN 12953-2 - SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
99/707159 DC : DRAFT APR 99	BS PREN 13480-2 - METALLIC INDUSTRIAL PIPING - PART 2: MATERIALS
UNI EN 4632-003 : 2011	AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 003: WELDING AND BRAZING OF HOMOGENEOUS ASSEMBLIES OF UNALLOYED AND LOW ALLOY STEELS
I.S. EN 13445-2:2014	UNFIRED PRESSURE VESSELS - PART 2: MATERIALS
05/30133802 DC : 0	EN 10028-7 - FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 7: STAINLESS STEELS
PREN 4632-003 : DRAFT 2008	AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 003: HOMOGENEOUS ASSEMBLIES OF UNALLOYED AND LOW ALLOY STEELS
I.S. EN 14638-3:2010	TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED RECEPTACLES OF A CAPACITY NOT EXCEEDING 150 LITRES - PART 3: WELDED CARBON STEEL CYLINDERS MADE TO A DESIGN JUSTIFIED BY EXPERIMENTAL METHODS
BS EN 14917 : 2009	METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
I.S. EN 13322-1:2003	TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED STEEL GAS CYLINDERS - DESIGN AND CONSTRUCTION - PART 1: CARBON STEEL
EN 14917:2009+A1:2012	Metal bellows expansion joints for pressure applications
BS EN ISO 4126-2:2003	Safety devices for protection against excessive pressure Bursting disc safety devices
EN 10028-3:2017	Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
BS EN 13480-2:2017	Metallic industrial piping Materials
DIN EN 10028-7:2016-10	FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 7: STAINLESS STEELS
DIN EN 14879-1 E : 2005	ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 1: TERMINOLOGY, DESIGN AND PREPARATION OF SUBSTRATE
UNE-EN 10028-4:2017	Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties
BS EN 10028-5:2017	Flat products made of steels for pressure purposes Weldable fine grain steels, thermomechanically rolled
DIN EN 14879-1:2005-12	Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate
BS EN 14208:2004	Transportable gas cylinders. Specification for welded pressure drums up to 1000 litre capacity for the transport of gases. Design and construction
DIN EN 14893:2014-09	LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
BS EN 10028-6:2017	Flat products made of steels for pressure purposes Weldable fine grain steels, quenched and tempered
BS EN 1252-1:1998	Cryogenic vessels. Materials Toughness requirements for temperatures below -80°C
EN 12952-3:2011	Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler
EN 1252-1:1998/AC:1998	CRYOGENIC VESSELS - MATERIALS - PART 1: TOUGHNESS REQUIREMENTS FOR TEMPERATURES BELOW -80 DEGREE C
EN 10028-6:2017	Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered
EN 10028-5:2017	Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled
EN 12953-2:2012	Shell boilers - Part 2: Materials for pressure parts of boilers and accessories
DIN EN 14917:2012-06	Metal bellows expansion joints for pressure applications (includes Amendment A1:2012)
PD CEN/TR 13445-101:2015	Unfired pressure vessels. Example of application
I.S. EN 1964-1:1999	TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE TRANSPORTABLE SEAMLESS STEEL GAS CYLINDERS OF WATER CAPACITIES FROM 0.5 LITRE UP TO AND INCLUDING 50 LITRES - PART 1: CYLINDERS MADE OF SEAMLESS STEEL WITH AN RM VALUE OF LESS THAN 1100 MPA
I.S. EN 1252-1:1998	CRYOGENIC VESSELS - MATERIALS - PART 1: TOUGHNESS REQUIREMENTS FOR TEMPERATURES BELOW -80 DEGREE C
13/30248693 DC : 0	BS EN 14893 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
04/30116684 DC : DRAFT JUL 2004	EN 14893 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LPG METALLIC PRESSURE DRUMS WITH A CAPACITY BETWEEN (150 AND 1 000 LITRES)
08/30187561 DC : 0	BS EN 10028-4 - FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 4: NICKEL ALLOY STEELS WITH SPECIFIED LOW TEMPERATURE PROPERTIES
DIN EN 14893 E : 2014	LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
ISO 4126-2:2003	Safety devices for protection against excessive pressure Part 2: Bursting disc safety devices
BS EN 13445-2 : 2014	UNFIRED PRESSURE VESSELS - PART 2: MATERIALS
EN ISO 4126-2:2003/AC:2006	SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 2: BURSTING DISC SAFETY DEVICES
UNE-EN 10028-7:2016	Flat products made of steels for pressure purposes - Part 7: Stainless steels
I.S. EN 10028-6:2017	FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 6: WELDABLE FINE GRAIN STEELS, QUENCHED AND TEMPERED
DIN EN 10028-2:2017-10	FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 2: NON-ALLOY AND ALLOY STEELS WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
I.S. EN 10028-2:2017	FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 2: NON-ALLOY AND ALLOY STEELS WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
I.S. EN 12953-2:2012	SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
I.S. EN 10028-7:2016&LC:2016	FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 7: STAINLESS STEELS
I.S. EN 10028-3:2017	FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 3: WELDABLE FINE GRAIN STEELS, NORMALIZED
I.S. EN 10028-4:2017	FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 4: NICKEL ALLOY STEELS WITH SPECIFIED LOW TEMPERATURE PROPERTIES
DIN EN 10028-4:2017-10	FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 4: NICKEL ALLOY STEELS WITH SPECIFIED LOW TEMPERATURE PROPERTIES
I.S. EN 14893:2014	LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
I.S. EN 12952-3:2011	WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 3: DESIGN AND CALCULATION FOR PRESSURE PARTS OF THE BOILER
DIN EN 10028-3:2017-10	FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 3: WELDABLE FINE GRAIN STEELS, NORMALIZED
I.S. EN 10028-5:2017	FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 5: WELDABLE FINE GRAIN STEELS, THERMOMECHANICALLY ROLLED
KTA 3507 : 2014(R2017)	FACTORY TESTS, POST-REPAIR TESTS AND CERTIFICATION OF SATISFACTORY PERFORMANCE IN SERVICE OF MODULES AND DEVICES FOR THE INSTRUMENTATION AND CONTROLS OF THE SAFETY SYSTEM
KTA 3702 : 2014(R2017)	EMERGENCY POWER GENERATING FACILITIES WITH DIESEL-GENERATOR UNITS IN NUCLEAR POWER PLANTS
NF EN 12952-3 : 2012	WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 3: DESIGN AND CALCULATION FOR PRESSURE PARTS OF THE BOILER
NFL 06 380-21 : 2003	AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 21: HOMOGENEOUS ASSEMBLIES OF UNALLOYED AND LOW ALLOY STEELS
05/30042957 DC : DRAFT JAN 2005	EN 15047 - TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE SEAMLESS STEEL CYLINDERS FOR PORTABLE FIRE EXTINGUISHERS AND BOTTLES FOR BREATHING APPARATUS OF WATER CAPACITIES FROM 0,5 LITRE UP TO 15 LITRES
08/30187567 DC : 0	BS EN 10028-6 - FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 6: WELDABLE FINE GRAIN STEELS, QUENCHED AND TEMPERED
BS EN 14638-3:2010	Transportable gas cylinders. Refillable welded receptacles of a capacity not exceeding 150 litres Welded carbon steel cylinders made to a design justified by experimental methods
02/710460 DC : DRAFT AUG 2002	ISO/DIS 21028-1 - CRYOGENIC VESSELS - TOUGHNESS REQUIREMENTS FOR MATERIALS AT CRYOGENIC TEMPERATURE - PART 1: TEMPERATURES BELOW -80 DEGREES C
08/30167676 DC : DRAFT JAN 2008	BS EN 10120 - STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS
07/30166946 DC : DRAFT AUG 2007	BS EN 15711 - VITREOUS AND PORCELAIN ENAMELS - GLASS LINED FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS - QUALITY REQUIREMENTS
04/30109196 DC : DRAFT FEB 2004	EN 14879 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 1: TERMINOLOGY, DESIGN AND PREPARATION OF SUBSTRATE
DIN EN 14917 E : 2012	METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
NF EN 4632-003 : 2010	AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 003: WELDING AND BRAZING OF HOMOGENEOUS ASSEMBLIES OF UNALLOYED AND LOW ALLOY STEELS
ONORM EN 13322-1 : 2006	TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED STEEL GAS CYLINDERS - DESIGN AND CONSTRUCTION - PART 1: CARBON STEEL
EN 13445-2:2014/A2:2018	UNFIRED PRESSURE VESSELS - PART 2: MATERIALS
UNI EN 1092-1 : 2013	FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
DIN EN 1092-1:2016-05 (Draft)	FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
I.S. EN 4632-003:2010	AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 003: WELDING AND BRAZING OF HOMOGENEOUS ASSEMBLIES OF UNALLOYED AND LOW ALLOY STEELS
I.S. EN 14917:2009	METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
EN 10028-2:2017	Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
EN 10028-4:2017	Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties
EN 10028-7:2016	Flat products made of steels for pressure purposes - Part 7: Stainless steels
BS EN 1964-2:2001	Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres Cylinders made of seamless steel with an R_m value of 1 100 MPa and above
BS EN 13322-1 : 2003	TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED STEEL GAS CYLINDERS - DESIGN AND CONSTRUCTION - PART 1: CARBON STEEL
EN 14208:2004	Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction
UNI EN 14893 : 2014	LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
UNI EN 12952-3 : 2012	WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 3: DESIGN AND CALCULATION FOR PRESSURE PARTS OF THE BOILER
UNI EN 12953-2 : 2012	SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
DIN EN 10028-6:2009-09	FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 6: WELDABLE FINE GRAIN STEELS, QUENCHED AND TEMPERED
04/30125076 DC : 0	EN 10111 - CONTINUOUSLY HOT ROLLED LOW CARBON STEEL SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
BS EN 4632-003:2010	Aerospace series. Weldability and brazeability of materials in aerospace constructions Welding and brazing of homogeneous assemblies of unalloyed and low alloy steels
DIN 19211:2004-02	Measurement of fluid flow by means of pressure differential devices - Condensation chambers
08/30187564 DC : 0	BS EN 10028-5 - FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 5: WELDABLE FINE GRAIN STEELS, THERMOMECHANICALLY ROLLED
DIN EN 14638-3:2012-06	Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel cylinders made to a design justified by experimental methods (includes Corrigendum AC:2012)
UNI EN 14917 : 2012	METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
13/30288581 DC : 0	BS EN 10028-7 - FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 7: STAINLESS STEELS
UNI EN 14638-3 : 2010	TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED RECEPTACLES OF A CAPACITY NOT EXCEEDING 150 LITRES - PART 3: WELDED CARBON STEEL CYLINDERS MADE TO A DESIGN JUSTIFIED BY EXPERIMENTAL METHODS
I.S. EN ISO 4126-2:2003	SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 2: BURSTING DISC SAFETY DEVICES
EN 1092-1:2018	Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges
PREN 14893 : DRAFT 2013	LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
DIN EN 13322-1:2006-05	TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED STEEL GAS CYLINDERS - DESIGN AND CONSTRUCTION - PART 1: CARBON STEEL
I.S. EN 1092-1:2007	FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES,FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
BS EN 13480-2:2017+A3:2018	Metallic industrial piping Materials
DIN EN 14208:2004-05	Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction
BS EN 10028-3:2017	Flat products made of steels for pressure purposes Weldable fine grain steels, normalized
BS EN 10028-2:2017	Flat products made of steels for pressure purposes Non-alloy and alloy steels with specified elevated temperature properties
BS EN 14879-1:2005	0rganic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Terminology, design and preparation of substrate
UNE-EN 10028-2:2017	Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
UNE-EN 12953-2:2013	Shell boilers - Part 2: Materials for pressure parts of boilers and accessories
BS EN 1964-1:2000	Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres Cylinders made of seamless steel with an R_m value of less than 1100 MPa
BS EN 1964-3:2000	Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres Cylinders made of seamless stainless steel with an R_m value of less than 1 100 MPa
EN 13480-2:2017	Metallic industrial piping - Part 2: Materials
BS EN 10028-4:2017	Flat products made of steels for pressure purposes Nickel alloy steels with specified low temperature properties
UNE-EN 10028-5:2017	Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled
BS EN 10028-7:2007	Flat products made of steels for pressure purposes Stainless steels
UNE-EN 12952-3:2012	Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler
BS EN 12953-2:2012	Shell boilers Materials for pressure parts of boilers and accessories
EN 14893:2014	LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres
EN 1964-2 : 2001	TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE TRANSPORTABLE SEAMLESS STEEL GAS CYLINDERS OF WATER CAPACITIES FROM 0,5 LITRE UP TO AND INCLUDING 150 LITRES - PART 2: CYLINDERS MADE OF SEAMLESS STEEL WITH AN R[M] VALUE OF 1 100 MPA AND ABOVE
EN 1964-3:2000	Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres - Part 3: Cylinders made of seamless stainless steel with an Rm value of less than 1100 MPa
EN 14638-3:2010/AC:2012	TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED RECEPTACLES OF A CAPACITY NOT EXCEEDING 150 LITRES - PART 3: WELDED CARBON STEEL CYLINDERS MADE TO A DESIGN JUSTIFIED BY EXPERIMENTAL METHODS
EN 4632-003:2010	Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 003: Welding and brazing of homogeneous assemblies of unalloyed and low alloy steels
EN 1964-1:1999/AC:1999	TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE TRANSPORTABLE SEAMLESS STEEL GAS CYLINDERS OF WATER CAPACITIES FROM 0.5 LITRE UP TO AND INCLUDING 150 LITRES - PART 1: CYLINDERS MADE OF SEAMLESS STEEL WITH AN RM VALUE OF LESS THAN 1100 MPA
EN 14879-1:2005	Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate
UNE-EN 14893:2014	LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres
ONORM EN ISO 4126-2 : 2006	SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 2: BURSTING DISC SAFETY DEVICES
08/30184300 DC : DRAFT SEP 2008	BS EN 12952-2 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
16/30336440 DC : DRAFT MAR 2016	BS EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
08/30187558 DC : 0	BS EN 10028-3 - FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 3: WELDABLE FINE GRAIN STEELS, NORMALIZED
08/30187555 DC : 0	BS EN 10028-2 - FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 2: NON-ALLOY AND ALLOY STEELS WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
NF EN 14638-3 : 2010	TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED RECEPTACLES OF A CAPACITY NOT EXCEEDING 150 LITRES - PART 3: WELDED CARBON STEEL, CYLINDERS MADE TO A DESIGN JUSTIFIED BY EXPERIMENTAL METHODS
UNE-EN 14638-3:2011	Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel cylinders made to a design justified by experimental methods
S.R. CEN/TR 13445-101:2015	UNFIRED PRESSURE VESSELS - PART 101: EXAMPLE OF APPLICATION
UNE-EN 13445-2:2015	Unfired pressure vessels - Part 2: Materials
UNI EN ISO 4126-2 : 2003	SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - BURSTING DISC SAFETY DEVICES
CEN/TR 13445-101:2015	Unfired pressure vessels - Example of application
UNE-EN 14917:2011	Metal bellows expansion joints for pressure applications
EN 13322-1:2003/A1:2006	TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED STEEL GAS CYLINDERS - DESIGN AND CONSTRUCTION - PART 1: CARBON STEEL
DIN EN 12952-3:2012-03	Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler
DIN EN 12953-2:2012-05	Shell boilers - Part 2: Materials for pressure parts of boilers and accessories
UNE-EN 10028-3:2017	Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
UNE-EN 10028-6:2017	Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered
BS EN 14893:2014	LPG equipment and accessories. Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres
BS EN 12952-3:2011	Water-tube boilers and auxiliary installations Design and calculation for pressure parts of the boiler
BS EN 13293:2002	Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless normalized carbon manganese steel gas cylinders of water capacity up to 0,5 litre for compressed, liquefied and dissolved gases and up to 1 litre for carbon dioxide
EN 13293:2002	Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless normalized carbon manganese steel gas cylinders of water capacity up to 0,5 litre for compressed, liquefied and dissolved gases and up to 1 litre for carbon dioxide
UNE-EN 13480-2:2017	Metallic industrial piping - Part 2: Materials (Endorsed by Asociación Española de Normalización in September of 2019.)

Standards Referencing This Book - (Show below) - (Hide below)

EN ISO 14284:2002	Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996)
EN 10048:1996	Hot rolled narrow steel strip - Tolerances on dimensions and shape
EN 10051:2010	Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape
EN ISO 9445-2:2010	Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 2: Wide strip and plate/sheet (ISO 9445-2:2009)
ISO 9444-2:2009	Continuously hot-rolled stainless steel Tolerances on dimensions and form Part 2: Wide strip and sheet/plate
EN 10079:2007	Definition of steel products
CEN/TR 10261:2013	Iron and steel - European standards for the determination of chemical composition
EN ISO 6892-1:2016	Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
EN 10028-3:2017	Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
EN 10029:2010	Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
EN 10164:2004	Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
EN 10028-6:2017	Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered
EN ISO 377:2017	Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017)
ISO 2566-2:1984	Steel Conversion of elongation values Part 2: Austenitic steels
EN ISO 9444-2:2010	Continuously hot-rolled stainless steel - Tolerances on dimensions and form - Part 2: Wide strip and sheet/plate (ISO 9444-2:2009)
EN ISO 9445-1:2010	Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 1: Narrow strip and cut lengths (ISO 9445-1:2009)
ISO 6892-1:2016	Metallic materials Tensile testing Part 1: Method of test at room temperature
EN ISO 18286:2010	Hot-rolled stainless steel plates - Tolerances on dimensions and shape (ISO 18286:2008)
EN 10168:2004	Steel products - Inspection documents - List of information and description
EN ISO 2566-1:1999	Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984)
EN 764-5:2014	Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification
EN 10028-2:2017	Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
EN 10028-7:2016	Flat products made of steels for pressure purposes - Part 7: Stainless steels
ISO 148-1:2016	Metallic materials — Charpy pendulum impact test — Part 1: Test method
EN 10163-2:2004	Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats
EN 10028-5:2017	Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled
ISO 9445-2:2009	Continuously cold-rolled stainless steel Tolerances on dimensions and form Part 2: Wide strip and plate/sheet
EN 10021:2006	General technical delivery conditions for steel products
ISO 9444-1:2009	Continuously hot-rolled stainless steel Tolerances on dimensions and form Part 1: Narrow strip and cut lengths
ISO 3651-2:1998	Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid
ISO 2566-1:1984	Steel Conversion of elongation values Part 1: Carbon and low alloy steels
EN ISO 2566-2:1999	Steel - Conversion of elongation values - Part 2: Austenitic steels (ISO 2566-2:1984)
EN 10204:2004	Metallic products - Types of inspection documents
EN 10307:2001	Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method)
EN ISO 6892-2:2011	Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011)
EN ISO 3651-2 : 1998	DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID
ISO 6892-2:2011	Metallic materials Tensile testing Part 2: Method of test at elevated temperature
EN 10020:2000	Definition and classification of grades of steel
EN ISO 148-1:2016	Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016)
ISO 18286:2008	Hot-rolled stainless steel plates — Tolerances on dimensions and shape
ISO 9445-1:2009	Continuously cold-rolled stainless steel Tolerances on dimensions and form Part 1: Narrow strip and cut lengths
EN 10160:1999	Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
EN 10028-4:2017	Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties
ISO 377:2017	Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
ISO 14284:1996	Steel and iron — Sampling and preparation of samples for the determination of chemical composition
EN 10088-1:2014	Stainless steels - Part 1: List of stainless steels

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart