Skip to content
Please enter a keyword to search

  • EN 10088-2:2014

    Current The latest, up-to-date edition.

    STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES

    Available format(s): 

    Language(s): 

    Published date:  22-10-2014

    Publisher:  Comite Europeen de Normalisation

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Abstract - (Show below) - (Hide below)

    This European Standard specifies the technical delivery conditions for hot or cold rolled sheet/plate and strip of standard grades and special grades of corrosion resisting stainless steels for general purposes.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes PREN 10088-2. (10/2014)
    Document Type Standard
    Publisher Comite Europeen de Normalisation
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    12/30260516 DC BS EN 15250 - SLOW HEAT RELEASE APPLIANCES FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS
    12/30263857 DC : 0 BS EN 4702-05 - AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - WASHER
    DIN EN 15272-3:2008-02 INLAND NAVIGATION VESSELS - EQUIPMENT FOR ROPE LEADING - PART 3: ROLLER FAIRLEADS
    DIN EN ISO 15883-7 E : 2016 WASHER-DISINFECTORS - PART 7: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING CHEMICAL DISINFECTION FOR NON-INVASIVE, NON-CRITICAL THERMOLABILE MEDICAL DEVICES AND HEALTHCARE EQUIPMENT (ISO 15883-7:2016)
    PREN 1337-8 : DRAFT 2018 STRUCTURAL BEARINGS - PART 8: GUIDE BEARINGS AND RESTRAINT BEARINGS
    CEI EN 50216-9 : 2010 POWER TRANSFORMER AND REACTOR FITTINGS - PART 9: OIL-TO-WATER HEAT EXCHANGERS
    02/124462 DC : DRAFT DEC 2002 BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
    BS EN ISO 15883-7:2016 Washer-disinfectors Requirements and tests for washer-disinfectors employing chemical disinfection for non-invasive, non-critical thermolabile medical devices and healthcare equipment
    I.S. EN 13287:2004 PERSONAL PROTECTIVE EQUIPMENT - FOOTWEAR - TEST METHOD FOR SLIP RESISTANCE
    06/30150265 DC : 0 EN 1474-1 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
    14/30286326 DC : 0 BS ISO 18611-3 - SHIPS AND MARINE TECHNOLOGY - MARINE NOX REDUCTION AGENT AUS 40 - PART 3: HANDLING, TRANSPORTATION AND STORAGE
    I.S. EN 13229:2001 INSET APPLIANCES INCLUDING OPEN FIRES FIRED BY SOLID FUELS - REQUIREMENTS AND TEST METHODS
    02/105261 DC : 0 BS EN 1337-8 - STRUCTURAL BEARINGS - GUIDED BEARINGS AND RESTRAINED BEARINGS
    07/30162334 DC : 0 BS ISO 29862 - SELF ADHESIVE TAPES - DETERMINATION OF PEEL ADHESION PROPERTIES
    12/30254917 DC : DRAFT JAN 2012 BS EN 877 - CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
    UNI EN 1474-1 : 2009 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
    14/30303000 DC : 0 BS EN 16777 - CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE NON-POROUS SURFACE TEST WITHOUT MECHANICAL ACTION FOR THE EVALUATION OF VIRUCIDAL ACTIVITY OF CHEMICAL DISINFECTANTS USED IN THE MEDICAL AREA - TEST METHOD AND REQUIREMENTS (PHASE 2/STEP 2)
    11/30244210 DC : 0 BS EN 16282-7 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 7: INSTALLATION AND USE OF FIXED FIRE SUPPRESSION SYSTEMS
    02/106055 DC : 0 PREN 14545 - TIMBER STRUCTURES - CONNECTORS - REQUIREMENTS
    08/30181446 DC : DRAFT JULY 2008 BS EN 1069-1 - WATER SLIDES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS
    DIN EN 1337-8 E : 2008 STRUCTURAL BEARINGS - PART 8: GUIDE BEARINGS AND RESTRAINT BEARINGS
    BS EN 62631-3-3 : 2016 COR 2016 DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 3-3: DETERMINATION OF RESISTIVE PROPERTIES (DC METHODS) - INSULATION RESISTANCE (IEC 62631-3-3:2015)
    BS EN 4702-05:2017 Aerospace series. Quick release fastening systems for non-structural and lining applications Retaining washer
    DIN EN 16821 E : 2017 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - SILICONE RUBBER HOSES
    DIN 17455:1999-02 WELDED CIRCULAR STAINLESS STEEL TUBES WITH GENERAL QUALITY REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS
    04/30123995 DC : DRAFT OCT 2004 EN 50216-10 - POWER TRANSFORMER AND REACTOR FITTINGS - PART 10: OIL-TO-AIR HEAT EXCHANGERS
    10/30227442 DC : 0 BS EN ISO 13710 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RECIPROCATING POSITIVE DISPLACEMENT PUMPS
    16/30338096 DC : 0 BS EN 303-1 - HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING
    16/30322067 DC : 0 BS EN 13001-3-1:2012 AMD 2 - CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
    15/30320419 DC : 0 BS EN 14527 - SHOWER TRAYS FOR DOMESTIC PURPOSES
    10/30212126 DC : 0 BS EN 845-2 - SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS
    02/105845 DC : DRAFT SEP 2002 PREN 14527 - SHOWER TRAYS FOR DOMESTIC PURPOSES
    DIN EN 16820 E : 2017 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - BONDED ELASTOMERIC HOSES WITH OR WITHOUT A LINING
    02/103630 DC : DRAFT MAY 2002 PREN 12446 - CHIMNEYS - COMPONENTS - CONCRETE OUTER WALL ELEMENTS
    PREN 285 : DRAFT 2013 STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
    10/30216993 DC : 0 BS EN 295-4 - VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS
    93/201088 DC : 0 PREN 50114 - MATERIALS AND SIZE REQUIREMENTS FOR EARTH ELECTRODES FROM THE CORROSION POINT OF VIEW
    04/30126864 DC : DRAFT DEC 2004 ISO 18225 - PLASTIC PIPING SYSTEMS - MULTILAYER PIPING SYSTEMS FOR OUTDOOR GAS INSTALLATIONS - SPECIFICATIONS FOR SYSTEMS
    CEI EN 60454-2 : 2008 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
    EN 60350-2:2018 Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance
    VDMA 24408 : DRAFT 2015 LIMIT OF THE SCOPE OF THE EUROPEAN CONSTRUCTION PRODUCTS REGULATION 305/2011/EU WITH RESPECT TO PROCESS PLANT AND AMENDMENTS TO HARMONIZED STANDARDS UNDER THE EUROPEAN PRESSURE EQUIPMENT DIRECTIVE
    I.S. EN 4702-05:2017 AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 05: RETAINING WASHER
    DIN EN 10048:1996-10 HOT-ROLLED NARROW STEEL STRIP - TOLERANCES ON DIMENSIONS AND SHAPE
    UNE-EN 16821:2018 Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Silicone rubber hoses
    PREN 4702-05 : DRAFT 2016 AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS WITH NON METALLIC STUD FOR NON-STRUCTURAL APPLICATIONS - PART 05: RETAINING WASHER
    PREN 6094 : 200P2 AEROSPACE SERIES - WASHER, SPRING, COUNTERSUNK
    DIN EN 14516 E : 2015 BATHS FOR DOMESTIC PURPOSES
    API 674 : 2010 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
    I.S. EN 16497-2:2017 CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 2: BALANCED FLUE APPLICATIONS
    PREN 1992-4 : DRAFT 2013 EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 4: DESIGN OF FASTENINGS FOR USE IN CONCRETE
    PREN 303-1 : DRAFT 2016 HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING
    PREN 12255-13 : DRAFT 2000 WASTEWATER TREATMENT PLANTS - PART 13: CHEMICAL TREATMENT
    I.S. EN 10169:2010 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS
    S.R. CEN TS 1992-4-1:2009 DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL
    I.S. EN 16821:2017 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - SILICONE RUBBER HOSES
    ISO 15348:2002 Pipework Metal bellows expansion joints General
    I.S. EN 4632-004:2012 AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 004: WELDING AND BRAZING OF HOMOGENEOUS ASSEMBLIES OF HIGH ALLOYED STEELS
    I.S. EN 1474-1:2008 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
    DIN 3016-1:2000-06 FASTENING CLAMPS - PART 1: WITH TONGUE
    I.S. EN 14527:2016 SHOWER TRAYS FOR DOMESTIC PURPOSES
    DD CEN/TS 1992-4-1:2009 Design of fastenings for use in concrete General
    13/30286967 DC : 0 BS EN 1992-4 - EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 4: DESIGN OF FASTENINGS FOR USE IN CONCRETE
    18/30365854 DC : 0 BS EN 1337-6 - STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS
    UNE-EN 16397-2:2015 Flexible couplings - Part 2: Characteristics and testing for metal banded flexible couplings, adaptors and bushes
    16/30348955 DC : 0 BS EN 16777 - CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE NON-POROUS SURFACE TEST WITHOUT MECHANICAL ACTION FOR THE EVALUATION OF VIRUCIDAL ACTIVITY OF CHEMICAL DISINFECTANTS USED IN THE MEDICAL AREA - TEST METHOD AND REQUIREMENTS (PHASE 2/STEP 2)
    BS EN ISO 4126-2:2003 Safety devices for protection against excessive pressure Bursting disc safety devices
    BS EN 131-6:2015 Ladders Telescopic ladders
    ISO 17484-1:2014 Plastics piping systems Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) Part 1: Specifications for systems
    I.S. EN ISO 13287:2012 PERSONAL PROTECTIVE EQUIPMENT - FOOTWEAR - TEST METHOD FOR SLIP RESISTANCE (ISO 13287:2012)
    EN 285:2015 Sterilization - Steam sterilizers - Large sterilizers
    DIN EN ISO 15883-2:2009-09 WASHER-DISINFECTORS - PART 2: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING THERMAL DISINFECTION FOR SURGICAL INSTRUMENTS, ANAESTHETIC EQUIPMENT, BOWLS, DISHES, RECEIVERS, UTENSILS, GLASSWARE, ETC.
    DIN EN 12561-1:2011-10 Railway applications - Tank wagons - Part 1: Identification plates for tank wagons for the carriage of dangerous goods
    DIN EN 14879-1 E : 2005 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 1: TERMINOLOGY, DESIGN AND PREPARATION OF SUBSTRATE
    DIN EN 12502-4 E : 2005 PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN WATER DISTRIBUTION AND STORAGE SYSTEMS - PART 4: INFLUENCING FACTORS FOR STAINLESS STEELS
    DIN EN 12255-13 E : 2003 WASTEWATER TREATMENT PLANTS - PART 13: CHEMICAL TREATMENT - TREATMENT OF WASTEWATER BY PRECIPITATION/FLOCCULATION
    BS EN 10095 : 1999-07 HEAT RESISTING STEELS AND NICKEL ALLOYS
    BS EN 12255-13:2002 Wastewater treatment plants Chemical treatment. Treatment of wastewater by precipitation/flocculation
    DIN EN 14879-1:2005-12 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate
    BS EN 14208:2004 Transportable gas cylinders. Specification for welded pressure drums up to 1000 litre capacity for the transport of gases. Design and construction
    BS EN 877 : 1999 CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
    ISO 15883-2:2006 Washer-disinfectors Part 2: Requirements and tests for washer-disinfectors employing thermal disinfection for surgical instruments, anaesthetic equipment, bowls, dishes, receivers, utensils, glassware, etc.
    BS EN 13451-1 : 2011 SWIMMING POOL EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS
    BS EN 12809 : 2001 RESIDENTIAL INDEPENDENT BOILERS FIRED BY SOLID FUEL - NOMINAL HEAT OUTPUT UP TO 50 KW - REQUIREMENTS AND TEST METHODS
    BS EN 295-7:2013 Vitrified clay pipe systems for drains and sewers Requirements for pipes and joints for pipe jacking
    BS EN 13658-2:2005 Metal lath and beads. Definitions, requirements and test methods External rendering
    BS EN 303-5:2012 Heating boilers Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW. Terminology, requirements, testing and marking
    BS EN 14015:2004 Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above
    UNI EN 508-3 : 2008 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 3: STAINLESS STEEL
    I.S. EN 459-2:2010 BUILDING LIME - PART 2: TEST METHODS
    DIN EN 1939:2003-12 SELF-ADHESIVE TAPES - DETERMINATION OF PEEL ADHESION PROPERTIES
    I.S. EN 877:2000 CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
    EN ISO 13287:2012 Personal protective equipment - Footwear - Test method for slip resistance (ISO 13287:2012)
    EN 1069-1:2017 Water slides - Part 1: Safety requirements and test methods
    EN 13084-7:2012 Free-standing chimneys - Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners
    EN 1337-8:2007 Structural bearings - Part 8: Guide Bearings and Restraint Bearings
    EN 10253-4:2008/AC:2009 BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
    EN 1059 : 1999 TIMBER STRUCTURES - PRODUCT REQUIREMENTS FOR PREFABRICATED TRUSSES USING PUNCHED METAL PLATE FASTENERS
    CEN/TS 1992-4-1:2009 Design of fastenings for use in concrete - Part 4-1: General
    DIN EN 12502-4:2005-03 PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN WATER DISTRIBUTION AND STORAGE SYSTEMS - PART 4: INFLUENCING FACTORS FOR STAINLESS STEELS
    EN 12502-4 : 2004 PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN WATER DISTRIBUTION AND STORAGE SYSTEMS - PART 4: INFLUENCING FACTORS FOR STAINLESS STEELS
    EN 1124-1:1999/A1:2004 PIPES AND FITTINGS OF LONGITUDINALLY WELDED STAINLESS STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 1: REQUIREMENTS, TESTING, QUALITY CONTROL
    EN 10088-4:2009 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
    EN 1160 : 1996 INSTALLATIONS AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - GENERAL CHARACTERISTICS OF LIQUEFIED NATURAL GAS
    EN 10312:2002/A1:2005 WELDED STAINLESS STEEL TUBES FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS - TECHNICAL DELIVERY CONDITIONS
    EN 12809:2001/A1:2004/AC:2007 RESIDENTIAL INDEPENDENT BOILERS FIRED BY SOLID FUEL - NOMINAL HEAT OUTPUT UP TO 50 KW - REQUIREMENTS AND TEST METHODS
    UNI EN 877 : 2007 CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
    EN 10253-3:2008 Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
    EN 10162:2003 Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances
    DIN EN 1069-1:2017-11 WATER SLIDES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS
    EN 13322-2:2003/A1:2006 TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED STEEL GAS CYLINDERS - DESIGN AND CONSTRUCTION - PART 2: STAINLESS STEEL
    EN 10296-2:2005/AC:2007 WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL
    EN 1337-2:2004 Structural bearings - Part 2: Sliding elements
    EN 12255-13:2002 Wastewater treatment plants - Part 13: Chemical treatment - Treatment of wastewater by precipitation/flocculation
    DIN EN 10258:1997-07 COLD-ROLLED STAINLESS STEEL NARROW STRIP AND CUT LENGTHS - TOLERANCES ON DIMENSIONS AND SHAPE
    EN 508-3:2008 Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel
    DIN EN 1090-2:2011-10 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
    EN 13001-3-1:2012+A2:2018 Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure
    EN 60454-2:2007 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
    EN 877:1999/A1:2006/AC:2008 CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
    EN 1337-4:2004/AC:2007 STRUCTURAL BEARINGS - PART 4: ROLLER BEARINGS
    EN 1337-6:2004 Structural bearings - Part 6: Rocker bearings
    EN 1337-5:2005 Structural bearings - Part 5: Pot bearings
    EN 12763:2000 Fibre-cement pipes and fittings for discharge systems for buildings - Dimensions and technical terms of delivery
    EN 13229:2001/A2:2004/AC:2007 INSET APPLIANCES INCLUDING OPEN FIRES FIRED BY SOLID FUELS - REQUIREMENTS AND TEST METHODS
    EN 62631-3-3:2016 Dielectric and resistive properties of solid insulating materials - Part 3-3: Determination of resistive properties (DC Methods) - Insulation resistance
    EN 12561-1:2011 Railway applications - Tank wagons - Part 1: Identification plates for tank wagons for the carriage of dangerous goods
    EN 10048:1996 Hot rolled narrow steel strip - Tolerances on dimensions and shape
    EN 10169:2010+A1:2012 Continuously organic coated (coil coated) steel flat products - Technical delivery conditions
    ONORM EN 12809 : 2006 RESIDENTIAL INDEPENDENT BOILERS FIRED BY SOLID FUEL - NOMINAL HEAT OUTPUT UP TO 50 KW - REQUIREMENTS AND TEST METHODS
    I.S. EN 12255-13:2002 WASTEWATER TREATMENT PLANTS - PART 13: CHEMICAL TREATMENT - TREATMENT OF WASTEWATER BY PRECIPITATION/FLOCCULATION
    ONORM EN 14785 : 2006 RESIDENTIAL SPACE HEATING APPLIANCES FIRED BY WOOD PELLETS - REQUIREMENTS AND TEST METHODS
    I.S. EN 62631-3-3:2016 DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 3-3: DETERMINATION OF RESISTIVE PROPERTIES (DC METHODS) - INSULATION RESISTANCE
    EN 14423:2013+A1:2016 Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
    BS EN 60454-2:2007 Pressure-sensitive adhesive tapes for electrical purposes Methods of test
    PREN 13697 : DRAFT 2012 CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE NON-POROUS SURFACE TEST FOR THE EVALUATION OF BACTERICIDAL AND/OR FUNGICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS USED IN FOOD, INDUSTRIAL, DOMESTIC AND INSTITUTIONAL AREAS - TEST METHOD AND REQUIREMENTS WITHOUT MECHANICAL ACTION (PHASE 2, STEP 2)
    PREN 14015-1 : DRAFT 2000 SPECIFICATION FOR THE DESIGN AND MANUFACTURE OF SITE BUILT, VERTICAL, CYLINDRICAL, FLAT-BOTTOMED, ABOVE GROUND, WELDED, METALLIC TANKS FOR THE STORAGE OF LIQUIDS AT AMBIENT TEMPERATURE AND ABOVE - PART 1: STEEL TANKS
    S.R. CEN/TS 16665:2014 STANDING LADDER DURABILITY TEST SPECIFICATION
    09/30195277 DC : 0 BS EN 13451-1 - SWIMMING POOL EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS
    PD CEN/TS 16665:2014 Standing ladder durability test specification
    I.S. EN 285:2015 STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
    BS EN 4632-004:2012 Aerospace series. Weldability and brazeability of materials in aerospace constructions Welding and brazing of homogeneous assemblies of high alloyed steels
    DD ENV 13287:2002 Safety, protective and occupational footwear for professional use. Test method for the determination of slip resistance
    08/30183119 DC : DRAFT AUG 2008 BS EN 459-2 - BUILDING LIME - PART 2: TEST METHODS
    BS EN 14545:2008 Timber structures. Connectors. Requirements
    API 674 REDLINE : 2010 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
    11/30235688 DC : 0 BS EN 13240 - ROOM HEATERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS
    01/107225 DC : DRAFT OCT 2001 PREN 14250 - TIMBER STRUCTURES - PRODUCT REQUIREMENTS FOR PREFABRICATED TRUSSES USING PUNCHED METAL PLATE FASTENERS
    09/30209028 DC : 0 BS EN 131-2 - LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
    BS EN 16397-2:2014 Flexible couplings Characteristics and testing for metal banded flexible couplings, adaptors and bushes
    17/30309582 DC : 0 BS EN 60350-2 ED 2.0 - HOUSEHOLD ELECTRIC COOKING APPLIANCES - PART 2: HOBS - METHODS FOR MEASURING PERFORMANCE
    BS EN 16497-2:2017 Chimneys. Concrete System Chimneys Balanced flue applications
    01/711714 DC : DRAFT AUG 2001 BS EN 12502-4 - PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - CORROSION LIKELIHOOD IN WATER CONVEYING SYSTEMS - PART 4: REVIEW OF THE INFLUENCING FACTORS FOR STAINLESS STEELS
    07/30162337 DC : 0 BS ISO 29863 - SELF ADHESIVE TAPES - MEASUREMENT OF STATIC SHEAR ADHESION
    10/30217031 DC : 0 EN 12446 - CHIMNEYS - COMPONENTS - CONCRETE OUTER WALL ELEMENTS
    04/30126871 DC : DRAFT DEC 2004 ISO 17484-1 - PLASTICS PIPING SYSTEMS - MULTI-LAYERED PIPE SYSTEMS FOR INDOOR GAS INSTALLATIONS WITH A MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 5 BAR - PART 1: SPECIFICATIONS FOR SYSTEMS
    07/30168410 DC : DRAFT DEC 2007 BS EN 508-3 - ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 3: STAINLESS STEEL
    11/30235685 DC : 0 BS EN 13229 - INSET APPLIANCES INCLUDING OPEN FIRES FIRED BY SOLID FUELS - REQUIREMENTS AND TEST METHODS
    04/30122629 DC : DRAFT SEP 2004 CEN/BT/TF 158 N10 - DISPENSE SYSTEMS FOR DRAUGHT BEVERAGES - PART 7: CYLINDRICAL BEVERAGE CONTAINERS WITH A CAPACITY OF UP TO 50 LITRES AND RATED FOR AN OPERATING PRESSURE UP TO 3 BAR
    03/105149 DC : DRAFT MAR 2003 PREN 14620-2 - DESIGN AND MANUFACTURE OF SITE BUILT, VERTICAL, CYLINDRICAL, FLAT-BOTTOMED STEEL TANKS FOR THE STORAGE OF REFRIGERATED, LIQUEFIED GASES WITH OPERATING TEMPERATURES BETWEEN -5 DEGREES C AND -165 DEGREES C - PART 2: METALLIC COMPONENTS
    13/30278676 DC : 0 BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
    CAN/CSA-ISO 15883-7:17 Washer-disinfectors — Part 7: Requirements and tests for washer-disinfectors employing chemical disinfection for non-invasive, non-critical thermolabile medical devices and healthcare equipment (Adopted ISO 15883-7:2016, first edition, 2016-02-01)
    EN 4702-05:2017 Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 05: Retaining washer
    15/30289283 DC : 0 BS EN 14516 - BATHS FOR DOMESTIC PURPOSES
    S.R. CEN/TS 16165:2016 DETERMINATION OF SLIP RESISTANCE OF PEDESTRIAN SURFACES - METHODS OF EVALUATION
    PREN 13451-1 : DRAFT 2009 SWIMMING POOL EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS
    UNI CEN/TS 1992-4-1 : 2009 DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL
    PREN 13053 : DRAFT 2017 VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS
    12/30250146 DC : 0 BS ISO 16143-1 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 1: FLAT PRODUCTS
    I.S. EN 15129:2009 ANTI-SEISMIC DEVICES
    I.S. EN 50216-9:2009 POWER TRANSFORMER AND REACTOR FITTINGS - PART 9: OIL-TO-WATER HEAT EXCHANGERS
    BS ISO 15348:2002 Pipework. Metal bellows expansion joints. General
    DIN EN 13697:2015-06 CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE NON-POROUS SURFACE TEST FOR THE EVALUATION OF BACTERICIDAL AND/OR FUNGICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS USED IN FOOD, INDUSTRIAL, DOMESTIC AND INSTITUTIONAL AREAS - TEST METHOD AND REQUIREMENTS WITHOUT MECHANICAL ACTION (PHASE 2, STEP 2)
    UNE-EN 1090-2:2011 Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
    API 610 REDLINE : 2010 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
    PREN 6089 : 200P2 AEROSPACE SERIES - WASHER, RETAINING, FOR USAGE WITH STUD EN 6088
    EN IEC 62631-2-1:2018 Dielectric and resistive properties of solid insulating materials - Part 2-1: Relative permittivity and dissipation factor - Technical frequencies (0,1 Hz to 10 MHz) - AC Methods
    PREN 303-5 : DRAFT 2010 CENTRAL-HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, HAND AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
    I.S. EN 16397-2:2014 FLEXIBLE COUPLINGS - PART 2: CHARACTERISTICS AND TESTING FOR METAL BANDED FLEXIBLE COUPLINGS, ADAPTORS AND BUSHES
    API 674 : 2010 : ERR 1 : 2014 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
    I.S. EN 1069-1:2017 WATER SLIDES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS
    PREN 131-2 : DRAFT 2009 LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
    BS EN 10169 : 2010 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS
    I.S. EN 60454-2:2007 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
    EN 15129:2018 (edition 2) Anti-seismic devices
    PREN 1337-6 : DRAFT 2018 STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS
    UNE-EN 10088-4:2010 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
    I.S. EN 50216-10:2009 POWER TRANSFORMER AND REACTOR FITTINGS - PART 10: OIL-TO-AIR HEAT EXCHANGERS
    BS EN 1090-2 : 2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
    EN ISO 4126-2:2003/AC:2006 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 2: BURSTING DISC SAFETY DEVICES
    BS EN 13697:2001 Chemical disinfectants and antiseptics. Quantitative non-porous surface test for the evaluation of bactericidal and/or fungicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas. Test method and requirements without mechanical action (phase 2/step 2)
    UNI EN 1090-2 : 2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
    ISO 18611-3:2014 Ships and marine technology Marine NOx reduction agent AUS 40 Part 3: Handling, transportation and storage
    EN 10088-1:2014 Stainless steels - Part 1: List of stainless steels
    I.S. EN 1939:2003 SELF ADHESIVE TAPES - MEASUREMENT OF PEEL ADHESION FROM STAINLESS STEEL OR FROM ITS OWN BACKING
    I.S. EN 13053:2006 VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS
    DIN EN 877:2010-01 Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance (includes Amendment A1:2006 and Corrigendum AC:2008)
    DIN EN 12809:2005-08 Residential independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods
    DIN EN 13084-7:2013-03 FREE-STANDING CHIMNEYS - PART 7: PRODUCT SPECIFICATIONS OF CYLINDRICAL STEEL FABRICATIONS FOR USE IN SINGLE WALL STEEL CHIMNEYS AND STEEL LINERS
    DIN EN 1858:2016-08 (Draft) CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS
    DIN EN 508-3:2009-07 Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel
    DIN EN 14868:2005-11 PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN CLOSED WATER CIRCULATION SYSTEMS
    DIN EN 303-5:2012-10 Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
    DIN EN 1337-6:2004-08 Structural bearings - Part 6: Rocker bearings
    DIN EN 1337-5:2005-07 Structural bearings - Part 5: Pot bearings
    DIN EN 14868 E : 2005 PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN CLOSED WATER CIRCULATION SYSTEMS
    DIN EN 10296-2 : 2007-06 WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL
    BS EN 12502-4:2004 Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in water distribution and storage systems Influencing factors for stainless steels
    BS EN ISO 13709:2003 Centrifugal pumps for petroleum, petrochemical and natural gas industries
    BS EN 10312:2002 Welded stainless steel tubes for the conveyance of aqueous liquids inclu ding water for human consumption. Technical delivery conditions
    BS EN ISO 15883-2:2009 Washer-disinfectors Requirements and tests for washer-disinfectors employing thermal disinfection for surgical instruments, anaesthetic equipment, bowls, dishes, receivers, utensils, glassware, etc.
    BS EN 10162:2003 Cold rolled steel sections. Technical delivery conditions. Dimensional and cross-sectional tolerances
    BS EN 295-4:2013 Vitrified clay pipe systems for drains and sewers Requirements for adaptors, connectors and flexible couplings
    BS EN 1939:2003 Self adhesive tapes. Determination of peel adhesion properties
    BS EN 13322-2:2003 Transportable gas cylinders. Refillable welded steel gas cylinders. Design and construction Stainless steel
    BS EN 1337-5:2005 Structural bearings Pot bearings
    BS EN 14516 : 2015 BATHS FOR DOMESTIC PURPOSES
    BS EN 1337-2:2004 Structural bearings Sliding elements
    BS EN 1462:2004 Brackets for eaves gutters. Requirements and testing
    I.S. EN 1858:2008 CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS
    I.S. EN 1462:2004 BRACKETS FOR EAVES GUTTERS - REQUIREMENTS AND TESTING
    I.S. EN ISO 15883-2:2009 WASHER-DISINFECTORS - PART 2: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING THERMAL DISINFECTION FOR SURGICAL INSTRUMENTS, ANAESTHETIC EQUIPMENT, BOWLS, DISHES, RECEIVERS, UTENSILS, GLASSWARE, ETC.
    I.S. EN 13451-1:2011 SWIMMING POOL EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS
    I.S. EN 131-2:2010 LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
    DIN EN 13240:2002-02 ROOM HEATERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS
    I.S. EN 10296-2:2006 WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL
    DIN EN 13053:2012-02 VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS (INCLUDES AMENDMENT A1:2011)
    DIN EN 13287:2004-08 PERSONAL PROTECTIVE EQUIPMENT - FOOTWEAR - TEST METHOD FOR SLIP RESISTANCE
    DIN EN 10088-1:2014-12 Stainless steels - Part 1: List of stainless steels; German version EN 10088-1:2014
    I.S. EN 13732:2013 FOOD PROCESSING MACHINERY - BULK MILK COOLERS ON FARMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND HYGIENE
    I.S. EN 12446:2011 CHIMNEYS - COMPONENTS - CONCRETE OUTER WALL ELEMENTS
    DIN EN 1943:2003-01 SELF ADHESIVE TAPES - MEASUREMENT OF STATIC SHEAR ADHESION
    DIN EN 1857:2010-08 Chimneys - Components - Concrete flue liners
    I.S. EN 10088-1:2014 STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS
    I.S. EN 295-7:2013 VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 7: REQUIREMENTS FOR PIPES AND JOINTS FOR PIPE JACKING
    I.S. EN 13084-7:2012 FREE-STANDING CHIMNEYS - PART 7: PRODUCT SPECIFICATIONS OF CYLINDRICAL STEEL FABRICATIONS FOR USE IN SINGLE WALL STEEL CHIMNEYS AND STEEL LINERS
    I.S. EN 508-3:2008 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELFSUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 3: STAINLESS STEEL
    I.S. EN 1337-2:2004 STRUCTURAL BEARINGS - PART 2: SLIDING ELEMENTS
    I.S. EN 12561-1:2011 RAILWAY APPLICATIONS - TANK WAGONS - PART 1: IDENTIFICATION PLATES FOR TANK WAGONS FOR THE CARRIAGE OF DANGEROUS GOODS
    DIN EN 13229:2002-01 INSET APPLIANCES INCLUDING OPEN FIRES FIRED BY SOLID FUELS - REQUIREMENTS AND TEST METHODS
    I.S. EN 303-1:2017 HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING
    I.S. EN 303-5:2012 HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
    I.S. EN 14394:2006 HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C
    I.S. EN 295-4:2013 VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS
    DIN EN 858-1:2002-05 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - PART 1: SAFETY AND EMC REQUIREMENTS FOR THE EQUIPMENT FOR THE STORAGE OF BULK MATERIALS IN SILOS, BUNKERS, BINS AND HOPPERS
    I.S. EN 1857:2010 CHIMNEYS - COMPONENTS - CONCRETE FLUE LINERS
    KTA 3507 : 2014(R2017) FACTORY TESTS, POST-REPAIR TESTS AND CERTIFICATION OF SATISFACTORY PERFORMANCE IN SERVICE OF MODULES AND DEVICES FOR THE INSTRUMENTATION AND CONTROLS OF THE SAFETY SYSTEM
    KTA 3702 : 2014(R2017) EMERGENCY POWER GENERATING FACILITIES WITH DIESEL-GENERATOR UNITS IN NUCLEAR POWER PLANTS
    ASME PV CODE 2A : 2017 BOILER AND PRESSURE VESSEL CODE - MATERIALS - FERROUS MATERIAL SPECIFICATIONS (BEGINNING TO SA-450) AND (SA-451 TO END)
    DIN 6656:1997-12 PNEUMATIC TUBE SYSTEMS - CONVEYOR TUBES, CONVEYOR TUBE BENDS AND SLEEVES FOR PNEUMATIC TUBES LINES IN STEEL AND STAINLESS STEEL
    DIN EN 16497-1:2015-05 CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 1: NON-BALANCED FLUE APPLICATIONS
    DIN EN 1337-8:2008-01 STRUCTURAL BEARINGS - PART 8: GUIDE BEARINGS AND RESTRAINT BEARINGS
    11/30244204 DC : 0 BS EN 16282-5 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 5: AIR DUCT - DESIGN AND DIMENSIONING
    I.S. EN 13240:2001 ROOMHEATERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS
    BS EN 50216-10:2009 Power transformer and reactor fittings Oil-to-air heat exchangers
    PREN 14620-2 : DRAFT 2003 DESIGN AND MANUFACTURE OF SITE BUILT, VERTICAL, CYLINDRICAL, FLAT-BOTTOMED STEEL TANKS FOR THE STORAGE OF REFRIGERATED, LIQUEFIED GASES WITH OPERATING TEMPERATURES BETWEEN -5 DEGREE C AND -165 DEGREE C - PART 2: METALLIC COMPONENTS
    DIN EN 16820:2015-03 (Draft) RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - BONDED ELASTOMERIC HOSES WITH OR WITHOUT A LINING
    05/30129619 DC : DRAFT FEB 2005 IEC 61537 ED.2 - CABLE TRAY SYSTEMS AND CABLE LADDER SYSTEMS FOR CABLE MANAGEMENT
    PREN 50114 : DRAFT 1993 MATERIALS AND SIZE REQUIREMENTS FOR EARTH ELECTRODES FROM THE CORROSION POINT OF VIEW
    I.S. EN 1160:1997 INSTALLATIONS AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - GENERAL CHARACTERISTICS OF LIQUEFIED NATURAL GAS
    I.S. EN 12815:2001 RESIDENTIAL COOKERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS
    14/30235350 DC : 0 BS EN ISO 15883-7 - WASHER-DISINFECTORS - PART 7: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING CHEMICAL DISINFECTION FOR NON-INVASIVE, NON-CRITICAL THERMOLABILE MEDICAL DEVICES AND HEALTHCARE EQUIPMENT
    UNI CEN/TS 16665 : 2014 STANDING LADDER DURABILITY TEST SPECIFICATION
    10/30231853 DC : DRAFT SEP 2010 BS EN 10352 - STAINLESS STEEL PLUMBING FITTINGS - FITTINGS WITH PRESS ENDS FOR METALLIC TUBES
    15/30299570 DC : 0 BS ISO 7195 - NUCLEAR ENERGY - PACKAGINGS FOR THE TRANSPORT OF URANIUM HEXAFLUORIDE (UF[6])
    UNE-EN ISO 13287:2013 Personal protective equipment - Footwear - Test method for slip resistance (ISO 13287:2012)
    DIN EN 10253-4:2008-06 BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
    00/102589 DC : DRAFT MAR 2000 PREN 12255-13 - WASTEWATER TREATMENT PLANTS - PART 13: CHEMICAL TREATMENT
    BS EN 16497-1:2015 Chimneys. Concrete System Chimneys Non-balanced flue applications
    UNI EN 806-4 : 2010 SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4: INSTALLATION
    UNI EN 303-5 : 2012 HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
    BS EN 806-4:2010 Specifications for installations inside buildings conveying water for human consumption Installation
    BS EN 1337-8:2007 Structural bearings Guide bearings and restraint bearings
    ISO 29862:2007 Self adhesive tapes Determination of peel adhesion properties
    04/30125241 DC : DRAFT NOV 2004 EN 15085-4 - RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 4: PRODUCTION REQUIREMENTS
    03/316891 DC : DRAFT OCT 2003 EN 13053 - VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATINGS AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS
    05/30132920 DC : DRAFT APR 2005 EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR THE EXECUTION OF STEEL STRUCTURES
    09/30207521 DC : 0 BS EN 10217-7 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES
    10/30228886 DC : 0 BS EN 303-5 - CENTRAL-HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, HAND AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
    DIN 17456:1999-02 SEAMLESS CIRCULAR STAINLESS STEEL TUBES WITH GENERAL QUALITY REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS
    08/30183861 DC : DRAFT SEP 2008 BS EN 13732 - FOOD PROCESSING MACHINERY - BULK MILK COOLERS ON FARM - REQUIREMENTS FOR PERFORMANCE, SAFETY AND HYGIENE
    CEN/TR 15623:2008 Food processing machinery - Route map - Materials for food area
    00/715206 DC : DRAFT OCT 2000 PREN 14015-1 - SPECIFICATION FOR THE DESIGN AND MANUFACTURE OF SITE BUILT, VERTICAL, CYLINDRICAL, FLAT-BOTTOMED, ABOVE GROUND, WELDED, METALLIC TANKS FOR THE STORAGE OF LIQUIDS AT AMBIENT TEMPERATURE AND ABOVE - PART 1: STEEL TANKS
    05/30126202 DC : 0 EN 10088-4 - STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
    DIN EN 131-6:2015-05 LADDERS - PART 6: TELESCOPIC LADDERS
    I.S. EN 15632-4:2009 DISTRICT HEATING PIPES - PRE-INSULATED FLEXIBLE PIPE SYSTEMS - PART 4: BONDED SYSTEM WITH METAL SERVICE PIPES; REQUIREMENTS AND TEST METHODS
    UNI EN 10253-4 : 2009 BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
    ISO 4126-2:2003 Safety devices for protection against excessive pressure Part 2: Bursting disc safety devices
    ISO 29863:2007 Self adhesive tapes Measurement of static shear adhesion
    I.S. ENV 1363-3:1999 FIRE RESISTANCE TESTS - PART 3: VERIFICATION OF FURNACE PERFORMANCE
    API 674 : 2010 : INC : ERR 1 : 2015 : R2016 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
    ISO 10855-1:2018 Offshore containers and associated lifting sets Part 1: Design, manufacture and marking of offshore containers
    I.S. EN 131-6:2015 LADDERS - PART 6: TELESCOPIC LADDERS
    S.R. CEN TR 15623:2008 FOOD PROCESSING MACHINERY - ROUTE MAP - MATERIALS FOR FOOD AREA
    I.S. EN 1337-8:2007 STRUCTURAL BEARINGS - PART 8: GUIDE BEARINGS AND RESTRAINT BEARINGS
    I.S. EN ISO 4126-2:2003 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 2: BURSTING DISC SAFETY DEVICES
    I.S. EN IEC 62631-2-1:2018 DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 2-1: RELATIVE PERMITTIVITY AND DISSIPATION FACTOR - TECHNICAL FREQUENCIES (0,1 HZ TO 10 MHZ) - AC METHODS
    PREN 295-4 : DRAFT 2010 VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS
    DIN EN 1069-1:2015-09 (Draft) WATER SLIDES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS
    PREN 10217-7 : DRAFT 2009 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES
    UNI EN 16397-2 : 2014 FLEXIBLE COUPLINGS - PART 2: CHARACTERISTICS AND TESTING FOR METAL BANDED FLEXIBLE COUPLINGS, ADAPTORS AND BUSHES
    NF EN 806-4 : 2010 SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4: INSTALLATION
    PREN 12809 : DRAFT 2011 RESIDENTIAL INDEPENDENT BOILERS FIRED BY SOLID FUEL - NOMINAL HEAT OUTPUT UP TO 50 KW - REQUIREMENTS AND TEST METHODS
    EN 131-6:2015 Ladders - Part 6: Telescopic ladders
    DIN EN 1090-2:2015-07 (Draft) EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
    I.S. EN 14423:2013 CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR
    ISO 7195:2005 Nuclear energy Packaging of uranium hexafluoride (UF6) for transport
    I.S. EN 1943:2002 SELF ADHESIVE TAPES - MEASUREMENT OF STATIC SHEAR ADHESION
    IEC 62631-2-1:2018 Dielectric and resistive properties of solid insulating materials - Part 2-1: Relative permittivity and dissipation factor - Technical Frequencies (0,1 Hz - 10 MHz) - AC Methods
    DIN EN 1462:2004-12 Brackets for eaves gutters - Requirements and testing
    DIN EN 1433:2005-09 DRAINAGE CHANNELS FOR VEHICULAR AND PEDESTRIAN AREAS - CLASSIFICATION, DESIGN AND TESTING REQUIREMENTS, MARKING AND EVALUATION OF CONFORMITY
    DIN EN 12446:2011-09 Chimneys - Components - Concrete outer wall elements
    DIN EN 14785 E : 2006 RESIDENTIAL SPACE HEATING APPLIANCES FIRED BY WOOD PELLETS - REQUIREMENTS AND TEST METHODS
    DIN EN 1337-4 E : 2004 STRUCTURAL BEARINGS - PART 4: ROLLER BEARINGS
    DIN EN 285:2016-05 Sterilization - Steam sterilizers - Large sterilizers
    DIN EN ISO 13287:2013-02 PERSONAL PROTECTIVE EQUIPMENT - FOOTWEAR - TEST METHOD FOR SLIP RESISTANCE (ISO 13287:2012)
    DIN EN 295-4:2013-05 VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS
    DIN EN 295-7:2013-05 VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 7: REQUIREMENTS FOR PIPES AND JOINTS FOR PIPE JACKING
    DIN EN 1337-5 E : 2005 STRUCTURAL BEARINGS - PART 5: POT BEARINGS
    DIN EN 14394 E : 2008 HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C
    DIN EN 14394:2008-12 HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C
    DIN EN 1337-2:2004-07 Structural bearings - Part 2: Sliding elements; German version EN 1337-2:2004
    BS EN 459-2:2010 Building lime Test methods
    IEC 62631-3-3:2015 Dielectric and resistive properties of solid insulating materials - Part 3-3: Determination of resistive properties (DC methods) - Insulation resistance
    UNE-EN 459-2:2011 Building lime - Part 2: Test methods
    DIN EN 10296-2 E : 2006 WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL
    BS EN 13053 : 2006 VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS
    DIN EN 1337-4:2004-08 Structural bearings - Part 4: Roller bearings
    UNE-EN 508-3:2010 Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel
    DIN EN 14785:2006-09 Residential space heating appliances fired by wood pellets - Requirements and test methods
    EN 13451-1:2011+A1:2016 Swimming pool equipment - Part 1: General safety requirements and test methods
    DIN EN 1858:2011-09 Chimneys - Components - Concrete flue blocks
    EN 13240:2001/A2:2004/AC:2007 ROOMHEATERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS
    EN 1474-1:2008 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 1: Design and testing of transfer arms
    UNI EN 13240 : 2006 ROOM-HEATERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS
    UNI EN 13084-7 : 2013 FREE-STANDING CHIMNEYS - PART 7: PRODUCT SPECIFICATIONS OF CYLINDRICAL STEEL FABRICATIONS FOR USE IN SINGLE WALL STEEL CHIMNEYS AND STEEL LINERS
    UNI EN 1857 : 2010 CHIMNEYS - COMPONENTS - CONCRETE FLUE LINERS
    I.S. EN ISO 8442-1:1998 MATERIALS AND ARTICLES IN CONTACT WITH FOODSTUFFS - CUTLERY AND TABLE HOLLOWARE - PART 1: REQUIREMENTS FOR CUTLERY FOR THE PREPARATION OF FOOD
    UNI EN 1337-2 : 2004 STRUCTURAL BEARINGS - PART 2: SLIDING ELEMENTS
    UNI EN 14394 : 2008 HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREES C
    UNI EN 12809 : 2004 RESIDENTIAL INDEPENDENT BOILERS FIRED BY SOLID FUEL - NOMINAL HEAT OUTPUT UP TO 50 KW - REQUIREMENTS AND TEST METHODS
    UNI EN 12815 : 2006 RESIDENTIAL COOKERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS
    ENV 1363-3:1998 Fire resistance tests - Part 3: Verification of furnace performance
    UNI EN 295-4 : 2013 VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS
    UNI EN ISO 15883-2 : 2009 WASHER-DISINFECTORS - PART 2: REQUIREMENTS AND TESTS FOR WASHER- DISINFECTORS EMPLOYING THERMAL DISINFECTION FOR SURGICAL INSTRUMENTS, ANAESTHETIC EQUIPMENT, BOWLS, DISHES, RECEIVERS, UTENSILS, GLASSWARE, ETC.
    UNI EN 10088-1 : 2014 STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS
    UNI EN 14785 : 2006 RESIDENTIAL SPACE HEATING APPLIANCES FIRED BY WOOD PELLETS - REQUIREMENTS AND TEST METHODS
    UNI EN 12561-1 : 2011 RAILWAY APPLICATIONS - TANK WAGONS - PART 1: IDENTIFICATION PLATES FOR TANK WAGONS FOR THE CARRIAGE OF DANGEROUS GOODS
    UNI EN 1858 : 2012 CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS
    UNI EN 12446 : 2011 CHIMNEYS - COMPONENTS - CONCRETE OUTER WALL ELEMENTS
    EN 303-5:2012 Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
    BS EN 16821:2017 Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry. Silicone rubber hoses
    DIN EN 16397-2:2015-01 FLEXIBLE COUPLINGS - PART 2: CHARACTERISTICS AND TESTING FOR METAL BANDED FLEXIBLE COUPLINGS, ADAPTORS AND BUSHES
    DIN EN 1474-1:2009-03 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
    DIN EN 14545 E : 2009 TIMBER STRUCTURES - CONNECTORS - REQUIREMENTS
    IEC 60350-2:2017 Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance
    BS EN 16820:2017 Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry. Bonded elastomeric hoses with or without a lining
    UNI EN 14545 : 2009 TIMBER STRUCTURES - CONNECTORS - REQUIREMENTS
    BS EN 50216-9:2009 Power transformer and reactor fittings Oil-to-water heat exchangers
    I.S. EN 12809:2001 RESIDENTIAL INDEPENDENT BOILERS FIRED BY SOLID FUEL - NOMINAL HEAT OUTPUT UP TO 50 KW - REQUIREMENTS AND TEST METHODS
    12/30262905 DC : 0 BS EN 13697 - CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE NON-POROUS SURFACE TEST FOR THE EVALUATION OF BACTERICIDAL AND/OR FUNGICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS USED IN FOOD, INDUSTRIAL, DOMESTIC AND INSTITUTIONAL AREAS - TEST METHOD AND REQUIREMENTS WITHOUT MECHANICAL ACTION (PHASE 2, STEP 2)
    ISO 15883-7:2016 Washer-disinfectors — Part 7: Requirements and tests for washer-disinfectors employing chemical disinfection for non-invasive, non-critical thermolabile medical devices and healthcare equipment
    04/30122624 DC : DRAFT SEP 2004 CEN/BT/TF 158 N05 - DISPENSE SYSTEMS FOR DRAUGHT BEVERAGES - PART 2: REQUIREMENTS FOR MATERIALS
    04/30122630 DC : DRAFT SEP 2004 CEN/BT/TF 158 N11 - DISPENSE SYSTEMS FOR DRAUGHT BEVERAGES - PART 8: CYLINDRICAL BEVERAGE CONTAINERS WITH A CAPACITY OF UP TO 50 LITRES AND RATED FOR AN OPERATING PRESSURE UP TO 7 BAR
    DIN EN 10088-4:2010-01 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
    PREN 131-6 : DRAFT 2017 LADDERS - PART 6: TELESCOPIC LADDERS
    03/108196 DC : 0 EN 10253-4 - BUTT WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC & AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
    12/30258206 DC : 0 BS EN 16397-2 - FLEXIBLE COUPLINGS - PART 2: MATERIALS AND DIMENSIONS FOR METAL BANDED FLEXIBLE COUPLINGS
    PREN 295-7 : DRAFT 2010 VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 7: REQUIREMENTS FOR PIPES AND JOINTS FOR PIPE JACKING
    08/30183125 DC : 0 BS EN 1857 - CHIMNEYS - COMPONENTS - CONCRETE FLUE LINERS
    11/30241728 DC : DRAFT MAR 2011 BS EN ISO 13287 - PERSONAL PROTECTIVE EQUIPMENT - FOOTWEAR - TEST METHOD FOR SLIP RESISTANCE
    08/30184277 DC : DRAFT SEP 2008 BS EN 12561-1 - RAILWAY APPLICATIONS - TANK WAGONS - PART 1: IDENTIFICATION PLATES FOR TANK WAGONS FOR THE CARRIAGE OF DANGEROUS GOODS
    02/562295 DC : DRAFT MAY 2002 PREN 13287 - SAFETY, PROTECTIVE AND OCCUPATIONAL FOOTWEAR FOR PROFESSIONAL USE - TEST METHOD FOR THE DETERMINATION OF SLIP RESISTANCE
    UNI EN 10253-3 : 2009 BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS
    BS EN 1474-1:2008 Installation and equipment for liquefied natural gas. Design and testing of marine transfer systems Design and testing of transfer arms
    BS EN 15272-3:2007 Inland navigation vessels. Equipment for rope leading Roller fairleads
    02/104824 DC : DRAFT JULY 2002 BS EN 14516 - BATHS FOR DOMESTIC PURPOSES
    07/30149385 DC : 0 BS ISO 22241-3 - DIESEL ENGINES - NO[X] REDUCTION AGENT AUS 32 - PART 3: HANDLING, TRANSPORTATION, STORAGE
    UNE-EN 15632-4:2010 District heating pipes - Pre-insulated flexible pipe systems - Part 4: Bonded system with metal service pipes; requirements and test methods
    DIN 17440:2001-03 STAINLESS STEELS - TECHNICAL DELIVERY CONDITIONS FOR DRAWN WIRE
    DIN EN 806-4:2010-06 Specifications for installations inside buildings conveying water for human consumption - Part 4: Installation
    DIN EN 10253-3:2009-02 BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS
    DIN EN 16497-1 E : 2015 CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 1: NON-BALANCED FLUE APPLICATIONS
    14/30304113 DC : 0 BS EN 16497-2 - CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 2: BALANCED FLUE APPLICATIONS
    11/30238022 DC : DRAFT MAR 2011 BS EN 12815 - RESIDENTIAL COOKERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS
    10/30234315 DC : DRAFT DEC 2010 BS EN 12561-1 - RAILWAY APPLICATIONS - TANK WAGONS - PART 1: IDENTIFICATION PLATES FOR TANK WAGONS FOR THE CARRIAGE OF DANGEROUS GOODS
    15/30331856 DC : 0 BS EN ISO 10855-1 - OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 1: OFFSHORE CONTAINER - DESIGN, MANUFACTURE AND MARKING
    10/30234634 DC : 0 BS EN 14423 - CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR
    10/30217002 DC : 0 BS EN 295-7 - VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 7: REQUIREMENTS FOR PIPES AND JOINTS FOR PIPE JACKING
    BS ISO 16143-1:2014 Stainless steels for general purposes Corrosion-resistant flat products
    04/30123986 DC : DRAFT OCT 2004 EN 50216-9 - POWER TRANSFORMER AND REACTOR FITTINGS - PART 9: OIL TO WATER HEAT EXCHANGER
    API 674 : 2010(R2016) POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
    DIN 30681:2013-12 COMPENSATORS FOR GAS-INSTALLATIONS - EXPANSION JOINTS WITH STAINLESS STEEL BELLOWS UNIT - SAFETY REQUIREMENTS, TESTING, MARKING
    07/30156249 DC : 0 BS EN 12446 - CHIMNEYS - COMPONENTS - CONCRETE OUTER WALL ELEMENTS
    BS EN 10253-4:2008 Butt-welding pipe fittings Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
    07/30156246 DC : 0 BS EN 1858 - CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS
    UNI EN 15272-3 : 2008 INLAND NAVIGATION VESSELS - EQUIPMENT FOR ROPE LEADING - PART 3: ROLLER FAIRLEADS
    EN 14516:2015 Baths for domestic purposes
    BS EN 10088-4:2009 Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
    API 610 : 2010 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
    API 674 : 2010 : ERR 2 : 2015 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
    BS EN ISO 13287:2012 Personal protective equipment. Footwear. Test method for slip resistance
    I.S. EN 13697:2015 CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE NON-POROUS SURFACE TEST FOR THE EVALUATION OF BACTERICIDAL AND/OR FUNGICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS USED IN FOOD, INDUSTRIAL, DOMESTIC AND INSTITUTIONAL AREAS - TEST METHOD AND REQUIREMENTS WITHOUT MECHANICAL ACTION (PHASE 2, STEP 2)
    I.S. EN 15272-3:2007 INLAND NAVIGATION VESSELS - EQUIPMENT FOR ROPE LEADING - PART 3: ROLLER FAIRLEADS
    I.S. EN 13001-3-1:2012 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE
    PREN 16777 : DRAFT 2016 BS EN 16777 - CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE NON-POROUS SURFACE TEST WITHOUT MECHANICAL ACTION FOR THE EVALUATION OF VIRUCIDAL ACTIVITY OF CHEMICAL DISINFECTANTS USED IN THE MEDICAL AREA - TEST METHOD AND REQUIREMENTS (PHASE 2/STEP 2)
    I.S. EN 14516:2015 BATHS FOR DOMESTIC PURPOSES
    NF EN 1090-2 : 2009 + A1 2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
    17/30339487 DC : 0 BS EN 13053 - VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS
    EN 13697:2015 Chemical disinfectants and antiseptics - Quantitative non-porous surface test for the evaluation of bactericidal and/or fungicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas - Test method and requirements without mechanical action (phase 2, step 2)
    13/30271701 DC : 0 BS EN 16510-1 - RESIDENTIAL SOLID FUEL BURNING APPLIANCES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
    ISO 16143-1:2014 Stainless steels for general purposes Part 1: Corrosion-resistant flat products
    PREN ISO 15883-2 : DRAFT 2002 WASHER-DISINFECTORS - PART 2: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING THERMAL DISINFECTION FOR SURGICAL INSTRUMENTS, ANAESTHETIC EQUIPMENT, HOLLOWWARE, UTENSILS, GLASSWARE, ETC
    NF EN 10253-3 : 2009 BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS
    NFL 06 380-22 : 2005 WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 22: HOMOGENEOUS ASSEMBLIES HIGHLY ALLOYED STEELS
    PREN 14516 : DRAFT 2015 BATHS FOR DOMESTIC PURPOSES
    I.S. EN ISO 15883-7:2016 WASHER-DISINFECTORS - PART 7: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING CHEMICAL DISINFECTION FOR NON-INVASIVE, NON-CRITICAL THERMOLABILE MEDICAL DEVICES AND HEALTHCARE EQUIPMENT (ISO 15883-7:2016)
    UNI EN 459-2 : 2010 BUILDING LIME - PART 2: TEST METHODS
    UNE-EN 14423:2014 Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
    EN 1090-2:2008+A1:2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
    I.S. EN 806-4:2010 SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4: INSTALLATION
    I.S. EN 14545:2008 TIMBER STRUCTURES - CONNECTORS - REQUIREMENTS
    I.S. EN ISO 13709:2009 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
    DIN EN 14015:2005-02 Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above
    DIN EN 13732:2013-10 Food processing machinery - Bulk milk coolers on farms - Requirements for performance, safety and hygiene
    DIN EN 1337-2 E : 2004 STRUCTURAL BEARINGS - PART 2: SLIDING ELEMENTS
    DIN EN 14208:2004-05 Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction
    DIN EN 459-2:2010-12 Building lime - Part 2: Test methods
    BS EN 13658-1:2005 Metal lath and beads. Definitions, requirements and test methods Internal plastering
    BS EN 14394 : 2005 HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C
    BS EN 14868:2005 Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in closed water circulation systems
    UNE-EN 1857:2013 Chimneys - Components - Concrete flue liners
    BS EN 14620-2:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0°C and -165°C Metallic components
    BS EN 1124-1:1999 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems Requirements, testing, quality control
    BS EN 12561-1:2011 Railway applications. Tank wagons Identification plates for tank wagons for the carriage of dangerous goods
    BS EN 10296-2:2005 Welded circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions Stainless steel
    BS EN 14879-1:2005 0rganic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Terminology, design and preparation of substrate
    BS EN 12763:2000 Fibre-cement pipes and fittings for discharge systems for buildings. Dimensions and technical terms of delivery
    BS EN 1858 : 2008 CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS
    BS EN 1474:1997 Installation and equipment for liquefied natural gas. Design and testing of loading/unloading arms
    BS EN 131-2 : 2010 LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
    BS EN 13287:2004 Safety, protective and occupational footwear for professional use. Test method for slip resistance
    BS EN 12815 : 2001 RESIDENTIAL COOKERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS
    BS EN 1857 : 2003 CHIMNEYS - COMPONENTS - CONCRETE FLUE LINERS
    ANSI/AAMI ST15883-2:2013(R2015) (ISO 15883-2:2006 MOD) WASHER-DISINFECTORS - PART 2: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING THERMAL DISINFECTION FOR SURGICAL INSTRUMENTS, ANESTHETIC EQUIPMENT, BOWLS, DISHES, RECEIVERS, UTENSILS, GLASSWARE, ETC.
    BS EN 1337-6:2004 Structural bearings Rocker bearings
    ISO 13710:2004 Petroleum, petrochemical and natural gas industries Reciprocating positive displacement pumps
    UNE-EN 12446:2012 Chimneys - Components - Concrete outer wall elements
    BS EN 508-3:2008 Roofing products from metal sheet. Specification for self-supporting products of steel, aluminium or stainless steel sheet Stainless steel
    UNI EN 13053 : 2011 VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS
    BS EN 14638-1:2006 Transportable gas cylinders. Refillable welded receptacles of a capacity not exceeding 150 litres Welded austenitic stainless steel cylinders made to a design justified by experimental methods
    IEC 60454-2:2007 Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test
    BS EN 1964-3:2000 Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres Cylinders made of seamless stainless steel with an Rm value of less than 1 100 MPa
    ISO 13287:2012 Personal protective equipment Footwear Test method for slip resistance
    BS EN 10048:1997 Hot rolled narrow steel strip. Tolerances on dimensions and shape
    BS EN 285:2015 Sterilization. Steam sterilizers. Large sterilizers
    BS EN 1069-1:2017 Water slides Safety requirements and test methods
    BS EN ISO 8442-1:1998 Materials and articles in contact with foodstuffs. Cutlery and table holloware Requirements for cutlery for the preparation of food
    BS EN 13240 : 2001 ROOMHEATERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS
    BS EN ISO 13710:2004 Petroleum, petrochemical and natural gas industries. Reciprocating positive displacement pumps
    BS EN 13084-7:2012 Free-standing chimneys Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners
    BS EN 1943:2002 Self adhesive tapes. Measurement of static shear adhesion
    UNE-EN 14516:2017 Baths for domestic purposes
    UNE-EN 1858:2011 Chimneys - Components - Concrete flue blocks
    UNE-EN 13084-7:2013 Free-standing chimneys - Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners
    BS EN 1160:1997 Installations and equipment for liquefied natural gas. General characteristics of liquefied natural gas
    UNE-EN 295-7:2013 Vitrified clay pipe systems for drains and sewers - Part 7: Requirements for pipes and joints for pipe jacking
    BS EN 14785:2006 Residential space heating appliances fired by wood pellets. Requirements and test methods
    BS EN 14527 : 2006 SHOWER TRAYS FOR DOMESTIC PURPOSES
    UNE-EN 10169:2011 Continuously organic coated (coil coated) steel flat products - Technical delivery conditions
    UNE-EN 13697:2015 Chemical disinfectants and antiseptics - Quantitative non-porous surface test for the evaluation of bactericidal and/or fungicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas - Test method and requirements without mechanical action (phase 2, step 2)
    BS EN 303-4:1999 Heating boilers. Heating boilers with forced draught burners Heating boilers with forced draught burners. Special requirements for boilers with forced draught oil burners with outputs up to 70 kW and a maximum operating pressure of 3 bar. Terminology, special requirements, testing and marking
    UNE-EN 12561-1:2012 Railway applications - Tank wagons - Part 1: Identification plates for tank wagons for the carriage of dangerous goods
    EN ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2009)
    EN ISO 8442-1:1997/AC:1999 MATERIALS AND ARTICLES IN CONTACT WITH FOODSTUFFS - CUTLERY AND TABLE HOLLOWARE - REQUIREMENTS FOR CUTLERY FOR THE PREPARATION OF FOOD
    EN 1474 : 1997 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF LOADING/UNLOADING ARMS
    EN 16497-2:2017 Chimneys - Concrete System Chimneys - Part 2: Balanced flue applications
    EN 14785:2006 Residential space heating appliances fired by wood pellets - Requirements and test methods
    EN 858-1:2002/A1:2004 SEPARATOR SYSTEMS FOR LIGHT LIQUIDS (E.G. OIL AND PETROL) - PART 1: PRINCIPLES OF PRODUCT DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL
    ENV 13287:2002/AC:2003 SAFETY, PROTECTIVE AND OCCUPATIONAL FOOTWEAR FOR PROFESSIONAL USE - TEST METHOD FOR THE DETERMINATION OF SLIP RESISTANCE
    EN 1462:2004 Brackets for eaves gutters - Requirements and testing
    EN 15272-3:2007 Inland navigation vessels - Equipment for rope leading - Part 3: Roller fairleads
    EN 14394:2005+A1:2008 Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C
    EN 13658-2:2005 Metal lath and beads - Definitions, requirements and test methods - Part 2: External rendering
    EN ISO 15883-7:2016 Washer-disinfectors - Part 7: Requirements and tests for washer-disinfectors employing chemical disinfection for non-invasive, non-critical thermolabile medical devices and healthcare equipment (ISO 15883-7:2016)
    EN 14638-1:2006 Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 1: Welded austenitic stainless steel cylinders made to a design justified by experimental methods
    EN 14868 : 2005 PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN CLOSED WATER CIRCULATION SYSTEMS
    EN 16584-1:2017 Railway applications - Design for PRM use - General requirements - Part 1: Contrast
    BS EN 1433:2002 Drainage channels for vehicular and pedestrian areas. Classification, design and testing requirements, marking and evaluation of conformity
    EN 1943 : 2002 SELF ADHESIVE TAPES - MEASUREMENT OF STATIC SHEAR ADHESION
    EN 295-7:2013 Vitrified clay pipe systems for drains and sewers - Part 7: Requirements for pipes and joints for pipe jacking
    EN ISO 15883-2:2009 Washer-disinfectors - Part 2: Requirements and tests for washer-disinfectors employing thermal disinfection for surgical instruments, anaesthetic equipment, bowls, dishes, receivers, utensils, glassware, etc. (ISO 15883-2:2006)
    EN 16820:2017 Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Bonded elastomeric hoses with or without a lining
    EN 1433:2002/A1:2005 DRAINAGE CHANNELS FOR VEHICULAR AND PEDESTRIAN AREAS - CLASSIFICATION, DESIGN AND TESTING REQUIREMENTS, MARKING AND EVALUATION OF CONFORMITY
    ONORM EN 877 : 2008 CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
    EN 1857:2010 Chimneys - Components - Concrete flue liners
    EN 14545:2008 Timber structures - Connectors - Requirements
    EN 14015:2004 Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above
    EN 16397-2:2014 Flexible couplings - Part 2: Characteristics and testing for metal banded flexible couplings, adaptors and bushes
    EN 806-4:2010 Specifications for installations inside buildings conveying water for human consumption - Part 4: Installation
    EN 14620-2:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 2: Metallic components
    EN 1858:2008+A1:2011 CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS
    EN 1964-3:2000 Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres - Part 3: Cylinders made of seamless stainless steel with an Rm value of less than 1100 MPa
    EN 303-1:2017 Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking
    EN 16821:2017 Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Silicone rubber hoses
    EN 15632-4:2009 District heating pipes - Pre-insulated flexible pipe systems - Part 4: Bonded system with metal service pipes; requirements and test methods
    EN 295-4:2013 Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for adaptors, connectors and flexible couplings
    EN 13732:2013 Food processing machinery - Bulk milk coolers on farms - Requirements for performance, safety and hygiene
    EN 16497-1:2015 Chimneys - Concrete System Chimneys - Part 1: Non-balanced flue applications
    EN 1939 : 2003 SELF ADHESIVE TAPES - DETERMINATION OF PEEL ADHESION PROPERTIES
    EN 13658-1:2005 Metal lath and beads - Definitions, requirements and test methods - Part 1: Internal plastering
    EN 4632-004:2012 Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 004: Welding and brazing of homogeneous assemblies of high alloyed steels
    EN ISO 13710:2004 Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps (ISO 13710:2004)
    EN 303-4:1999 Heating boilers - Part 4: Heating boilers with forced draught burners - Special requirements for boilers with forced draught oil burners with outputs up to 70 kW and a maximum operating pressure of 3 bar - Terminology, special requirements, testing and marking
    EN 14208:2004 Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction
    EN 1825-1:2004/AC:2006 GREASE SEPARATORS - PART 1: PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL
    EN 14879-1:2005 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate
    DIN EN 303-1:2016-07 (Draft) HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING
    BS EN 16584-1:2017 Railway applications. Design for PRM use. General requirements Contrast
    15/30315105 DC : 0 BS EN 16820 - HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY WITH HOSES OF NON-METALLIC MATERIALS - ELASTOMERIC HOSES WITH OR WITHOUT LINER
    13/30277400 DC : 0 BS EN 131-6 - LADDERS - PART 6: TELESCOPIC LADDERS
    12/30266154 DC : 0 BS EN 16497-1 - CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 1: NON-BALANCED FLUE APPLICATIONS
    13/30292436 DC : 0 BS EN 62631-3-3 - GUIDELINES FOR THE DETERMINATION OF DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 3-3: DETERMINATION OF RESISTIVE PROPERTIES (DC METHODS) - INSULATION RESISTANCE
    DIN EN 16821:2015-03 (Draft) RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - SILICONE RUBBER HOSES
    DIN EN ISO 15883-7:2016-10 WASHER-DISINFECTORS - PART 7: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING CHEMICAL DISINFECTION FOR NON-INVASIVE, NON-CRITICAL THERMOLABILE MEDICAL DEVICES AND HEALTHCARE EQUIPMENT (ISO 15883-7:2016)
    DIN 2695:2002-11 Diaphragm-weld packings and weld ring seals for flange connections
    I.S. EN 16497-1:2015 CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 1: NON-BALANCED FLUE APPLICATIONS
    DIN EN 16497-2 E : 2017 CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 2: BALANCED FLUE APPLICATIONS
    03/109805 DC : DRAFT JUNE 2003 EN 0023095 - TRANSPORTABLE GAS CYLINDERS - WELDED AUSTENITIC STAINLESS STEEL CYLINDERS MADE TO A DESIGN JUSTIFIED BY FE OR EXPERIMENTAL METHODS
    BS ISO 18611-3:2014 Ships and marine technology. Marine NOx reduction agent AUS 40 Handling, transportation and storage
    I.S. EN 1474:1998 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF LOADING/UNLOADING ARMS
    10/30212123 DC : 0 BS EN 845-1 - SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS
    03/317080 DC : DRAFT OCT 2003 EN 14785 - RESIDENTIAL SPACE HEATING APPLIANCES FIRED BY WOOD PELLETS - REQUIREMENTS AND TEST METHODS
    DIN EN 16397-2 E : 2015 FLEXIBLE COUPLINGS - PART 2: CHARACTERISTICS AND TESTING FOR METAL BANDED FLEXIBLE COUPLINGS, ADAPTORS AND BUSHES
    PD CR 10313:2000 Classification of grades of steel. Examples of classification related to European standards
    15/30323694 DC : 0 BS EN 62631-2-1 - DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 2-1: RELATIVE PERMITTIVITY AND DISSIPATION FACTOR - TECHNICAL FREQUENCIES (0.1 HZ - 10 MHZ), AC METHODS
    BS EN 60350-2 : 2013 HOUSEHOLD ELECTRIC COOKING APPLIANCES - HOBS - METHODS FOR MEASURING PERFORMANCE
    11/30238019 DC : 0 BS EN 12809 - RESIDENTIAL INDEPENDENT BOILERS FIRED BY SOLID FUEL - NOMINAL HEAT OUTPUT UP TO 50 KW - REQUIREMENTS AND TEST METHODS
    I.S. ENV 1993-1-4:1996 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS
    15/30325361 DC : 0 BS EN 1069-1 - WATER SLIDES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS
    PREN 13240 : DRAFT 2011 ROOM HEATERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS
    UNE-EN 1993-1-4:2012 Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels
    DIN EN 14545:2009-02 TIMBER STRUCTURES - CONNECTORS - REQUIREMENTS
    07/30160800 DC : 0 BS EN 15632-4 - DISTRICT HEATING PIPES - PRE-INSULATED FLEXIBLE PIPE SYSTEMS - PART 4: BONDED METAL SERVICE PIPES - REQUIREMENTS AND TEST METHODS
    DIN EN 16497-2:2017-07 CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 2: BALANCED FLUE APPLICATIONS
    PD CEN/TR 15623:2008 Food processing machinery. Route map. Materials for food area
    BS EN 10253-3:2008 Butt-welding pipe fittings Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
    15/30315109 DC : 0 BS EN 16821 - HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY WITH HOSES OF NON-METALLIC MATERIALS - SILICONE RUBBER HOSES
    PREN 15250 : DRAFT 2012 SLOW HEAT RELEASE APPLIANCES FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS
    UNI EN 4632-004 : 2014 AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 004: WELDING AND BRAZING OF HOMOGENEOUS ASSEMBLIES OF HIGH ALLOYED STEELS
    BS EN 15632-4:2009 District heating pipes. Pre-insulated flexible pipe systems Bonded system with metal service pipes; requirements and test methods
    DIN EN 10169:2012-06 Continuously organic coated (coil coated) steel flat products - Technical delivery conditions (includes Amendment A1:2012)
    11/30254165 DC : 0 BS EN 10088-1 - STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS
    BS ISO 17484-1:2014 Plastics piping systems. Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) Specifications for systems
    03/110340 DC : 0 BS EN 131-2 - LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
    03/118682 DC : DRAFT JAN 2004 PREN 14868 - PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - CORROSION LIKELIHOOD IN WATER RECIRCULATION SYSTEMS
    11/30237753 DC : 0 BS ISO 17484-1 - PLASTICS PIPING SYSTEMS - MULTILAYER PIPE SYSTEMS FOR INDOOR GAS INSTALLATIONS WITH A MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 5 BAR (500 KPA) - PART 1: SPECIFICATIONS FOR SYSTEMS
    DIN 3016-2:2000-06 FASTENING CLAMPS - PART 2: WITH FASTENING LUGS
    03/700194 DC : DRAFT FEB 2003 BS EN ISO 15883-2 - WASHER-DISINFECTORS - PART 2: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING THERMAL DISINFECTION FOR SURGICAL INSTRUMENTS, ANAESTHETIC EQUIPMENT, HOLLOWWARE, UTENSILS, GLASSWARE, ETC.
    04/30114690 DC : 0 EN 131-5 - LADDERS - PART 5: ACCESSORIES FOR LADDERS
    DD ENV 1090-6:2001 Execution of steel structures Supplementary rules for stainless steel
    PREN 4632-004 : 200P1 WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 004: HOMOGENEOUS ASSEMBLIES HIGHLY ALLOYED STEELS
    UNI EN 15632-4 : 2009 DISTRICT HEATING PIPES - PRE-INSULATED FLEXIBLE PIPE SYSTEMS - PART 4: BONDED SYSTEM WITH METAL SERVICE PIPES - REQUIREMENTS AND TEST METHODS
    EN 14527:2016 Shower trays for domestic purposes
    08/30195539 DC : 0 BS EN 4632-004 - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 004: HOMOGENEOUS ASSEMBLIES HIGHLY ALLOYED STEELS
    CSA Z15883-2 : 2009 : R2014 WASHER-DISINFECTORS - PART 2: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING THERMAL DISINFECTION FOR SURGICAL INSTRUMENTS, ANAESTHETIC EQUIPMENT, BOWLS, DISHES, RECEIVERS, UTENSILS, GLASSWARE, ETC.
    I.S. EN 16820:2017 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - BONDED ELASTOMERIC HOSES WITH OR WITHOUT A LINING
    UNE-EN ISO 15883-7:2016 Washer-disinfectors - Part 7: Requirements and tests for washer-disinfectors employing chemical disinfection for non-invasive, non-critical thermolabile medical devices and healthcare equipment (ISO 15883-7:2016)
    EN 459-2:2010 Building lime - Part 2: Test methods
    PREN 16510-1 : DRAFT 2013 RESIDENTIAL SOLID FUEL BURNING APPLIANCES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
    PREN 1069-1 : DRAFT 2015 WATER SLIDES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS
    AAMI ST15883-2 : 2013 WASHER-DISINFECTORS - PART 2: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING THERMAL DISINFECTION FOR SURGICAL INSTRUMENTS, ANESTHETIC EQUIPMENT, BOWLS, DISHES, RECEIVERS, UTENSILS, GLASSWARE, ETC.
    KTA 3205.2 : 2015 COR 2016 COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS - PART 2: COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS FOR PRESSURE AND ACTIVITY-RETAINING COMPONENTS IN SYSTEMS OUTSIDE THE PRIMARY CIRCUIT
    I.S. EN 1090-2:2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
    S.R. CWA 16762:2014 CEN WORKSHOP AGREEMENT - CEN/WS SERES - ICT STANDARDS IN SUPPORT OF AN EREPORTING FRAMEWORK FOR THE ENGINEERING MATERIALS SECTOR
    I.S. EN 16584-1:2017 RAILWAY APPLICATIONS - DESIGN FOR PRM USE - GENERAL REQUIREMENTS - PART 1: CONTRAST
    CSA Z15883-2 : 2009 WASHER-DISINFECTORS - PART 2: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING THERMAL DISINFECTION FOR SURGICAL INSTRUMENTS, ANAESTHETIC EQUIPMENT, BOWLS, DISHES, RECEIVERS, UTENSILS, GLASSWARE, ETC.
    I.S. EN 60350-2:2018 HOUSEHOLD ELECTRIC COOKING APPLIANCES - PART 2: HOBS - METHODS FOR MEASURING PERFORMANCE
    I.S. EN 10253-4:2008 BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
    17/30363915 DC : 0 BS EN 131-6 - LADDERS - PART 6: TELESCOPIC LADDERS
    NF EN 15632-4 : 2010 DISTRICT HEATING PIPES - PRE-INSULATED FLEXIBLE PIPE SYSTEMS - PART 4: BONDED SYSTEM WITH METAL SERVICE PIPES - REQUIREMENTS AND TEST METHODS
    UNE-EN 16820:2018 Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Bonded elastomeric hoses with or without a lining
    UNI EN 10169 : 2012 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS
    XP CEN/TS 1992-4-1 : 2009 XP DESIGN FOR FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL
    UNI EN ISO 4126-2 : 2003 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - BURSTING DISC SAFETY DEVICES
    UNI EN 10088-4 : 2009 STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
    UNE-EN 50216-10:2010 Power transformer and reactor fittings - Part 10: Oil-to-air heat exchangers
    CEI EN 50216-10 : 2010 POWER TRANSFORMER AND REACTOR FITTINGS - PART 10: OIL-TO-AIR HEAT EXCHANGERS
    PREN 10088-1 : DRAFT 2011 STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS
    BS EN 14423:2013+A2:2019 Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
    DIN EN 131-6 E : 2015 LADDERS - PART 6: TELESCOPIC LADDERS
    I.S. EN 10088-4:2009 STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
    EN 13053:2006+A1:2011 Ventilation for buildings - Air handling units - Rating and performance for units, components and sections
    I.S. EN 10253-3:2008 BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS
    S.R. CR 10313:2000 CLASSIFICATION OF GRADES OF STEEL - EXAMPLES OF CLASSIFICATION RELATED TO EUROPEAN STANDARDS
    UNE-EN 1069-1:2017 Water slides - Part 1: Safety requirements and test methods
    UNI EN ISO 13287 : 2012 PERSONAL PROTECTIVE EQUIPMENT - FOOTWEAR - TEST METHOD FOR SLIP RESISTANCE
    DIN EN 13658-1:2005-09 Metal lath and beads - Definitions, requirements and test methods - Part 1: Internal plastering
    DIN EN 13658-2:2005-09 Metal lath and beads - Definitions, requirements and test methods - Part 2: External rendering
    DIN EN 1337-6 E : 2004 STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS
    UNE-EN 16584-1:2017 Railway applications - Design for PRM Use - General requirements - Part 1: Contrast
    BS EN 13229 : 2001 INSET APPLIANCES INCLUDING OPEN FIRES FIRED BY SOLID FUELS - REQUIREMENTS AND TEST METHODS
    UNE-EN 285:2016 Sterilization - Steam sterilizers - Large sterilizers
    BS EN 1059:1999 Timber structures. Product requirements for prefabricated trusses using punched metal plate fasteners
    UNE-EN 10088-1:2015 Stainless steels - Part 1: List of stainless steels
    BS EN 12446:2011 Chimneys. Components. Concrete outer wall elements
    BS EN 13732:2013 Food processing machinery. Bulk milk coolers on farms. Requirements for performance, safety and hygiene
    BS EN 10259:1997 Cold-rolled stainless and heat resisting steel wide strip and plate/sheet. Tolerances on dimensions and shape
    BS EN 1825-1:2004 Grease separators Principles of design, performance and testing, marking and quality control
    UNE-EN 13053:2007 Ventilation for buildings - Air handling units - Rating and performance for units, components and sections
    UNE-EN 295-4:2013 Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for adaptors, connectors and flexible couplings
    BS EN 1337-4:2004 Structural bearings Roller bearings
    BS EN 10088-1:2014 Stainless steels List of stainless steels
    BS EN 10258:1997 Cold-rolled stainless steel narrow strip and cut lengths. Tolerances on dimensions and shape
    UNE-EN 303-5:2013 Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
    BS EN 858-1:2002 Separator systems for light liquids (e.g. oil and petrol) Principles of product design, performance and testing, marking and quality control
    ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries
    BS EN 303-1:2017 Heating boilers Heating boilers with forced draught burners. Terminology, general requirements, testing and marking
    DIN EN 10312:2005-12 Welded stainless steel tubes for the conveyance of water and other aqueous liquids - Technical delivery conditions; German version EN 10312:2002 + A1:2005
    CEN/TS 16165:2016 Determination of slip resistance of pedestrian surfaces - Methods of evaluation
    DIN EN 12255-13:2003-04 WASTEWATER TREATMENT PLANTS - PART 13: CHEMICAL TREATMENT - TREATMENT OF WASTEWATER BY PRECIPITATION/FLOCCULATION
    EN 13287:2004 Personal protective equipment - Footwear - Test method for slip resistance
    EN 12815:2001/A1:2004/AC:2007 RESIDENTIAL COOKERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS
    EN 12446:2011 Chimneys - Components - Concrete outer wall elements
    CEN/TS 16665:2014 Standing ladder durability test specification
    DIN EN 10296-2:2006-02 Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
    CR 10313:2000 Classification of grades of steel - Examples of classification related to European Standards
    EN 10095:1999 Heat resisting steels and nickel alloys
    EN 131-2:2010+A2:2017 Ladders - Part 2: Requirements, testing, marking
    DIN EN 14516:2015-12 BATHS FOR DOMESTIC PURPOSES
    DIN EN 10259:1997-07 COLD-ROLLED STAINLESS STEEL WIDE STRIP AND PLATE/SHEET - TOLERANCES ON DIMENSIONS AND SHAPE
    DIN EN 1825-1:2004-12 Grease separators - Part 1: Principles of design, performance and testing, marking and quality control; German version EN 1825-1:2004
    DIN EN 14638-1:2006-07 Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 1: Welded austenitic stainless steel cylinders made to a design justified by experimental methods
    EN 50216-10:2009 Power transformer and reactor fittings - Part 10: Oil-to-air heat exchangers
    EN 50216-9:2009 Power transformer and reactor fittings - Part 9: Oil-to-water heat exchangers
    DIN EN 10162:2003-12 Cold-rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances; German version EN 10162:2003
    UNE-EN 60350-2:2014 Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance
    UNE-EN 13451-1:2012 Swimming pool equipment - Part 1: General safety requirements and test methods

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 9445:2002 Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths Tolerances on dimensions and form
    ISO 6507-1:2005 Metallic materials Vickers hardness test Part 1: Test method
    EN ISO 14284:2002 Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996)
    EN 10052:1993 Vocabulary of heat treatment terms for ferrous products
    EN ISO 6508-1:2016 Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016)
    EN ISO 6506-1:2014 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
    EN 10048:1996 Hot rolled narrow steel strip - Tolerances on dimensions and shape
    ISO 6506-1:2014 Metallic materials Brinell hardness test Part 1: Test method
    EN ISO 9445-2:2010 Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 2: Wide strip and plate/sheet (ISO 9445-2:2009)
    ISO 9444-2:2009 Continuously hot-rolled stainless steel Tolerances on dimensions and form Part 2: Wide strip and sheet/plate
    EN 10079:2007 Definition of steel products
    EN 10027-2:2015 DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
    CEN/TR 10261:2013 Iron and steel - European standards for the determination of chemical composition
    EN ISO 6892-1:2016 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
    ISO 15510:2014 Stainless steels Chemical composition
    EN ISO 377:2017 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017)
    ISO 6508-1:2016 Metallic materials — Rockwell hardness test — Part 1: Test method
    EN ISO 9444-2:2010 Continuously hot-rolled stainless steel - Tolerances on dimensions and form - Part 2: Wide strip and sheet/plate (ISO 9444-2:2009)
    EN ISO 9445-1:2010 Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 1: Narrow strip and cut lengths (ISO 9445-1:2009)
    ISO 6892-1:2016 Metallic materials Tensile testing Part 1: Method of test at room temperature
    EN ISO 18286:2010 Hot-rolled stainless steel plates - Tolerances on dimensions and shape (ISO 18286:2008)
    EN 10151:2002 Stainless steel strip for springs - Technical delivery conditions
    EN 10168:2004 Steel products - Inspection documents - List of information and description
    EN 10028-7:2016 Flat products made of steels for pressure purposes - Part 7: Stainless steels
    ISO 148-1:2016 Metallic materials — Charpy pendulum impact test — Part 1: Test method
    EN 10095:1999 Heat resisting steels and nickel alloys
    EN 10163-2:2004 Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats
    EN 10163-1:2004/AC:2007 DELIVERY REQUIREMENTS FOR SURFACE CONDITION OF HOT-ROLLED STEEL PLATES, WIDE FLATS AND SECTIONS - PART 1: GENERAL REQUIREMENTS
    ISO 9445-2:2009 Continuously cold-rolled stainless steel Tolerances on dimensions and form Part 2: Wide strip and plate/sheet
    EN 10021:2006 General technical delivery conditions for steel products
    ISO 3651-2:1998 Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid
    EN 10204:2004 Metallic products - Types of inspection documents
    EN 10307:2001 Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method)
    EN ISO 6892-2:2011 Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011)
    EN ISO 3651-2 : 1998 DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID
    EN 10027-1:2016 Designation systems for steels - Part 1: Steel names
    ISO 6892-2:2011 Metallic materials Tensile testing Part 2: Method of test at elevated temperature
    EN ISO 148-1:2016 Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016)
    ISO 18286:2008 Hot-rolled stainless steel plates — Tolerances on dimensions and shape
    EN 10302:2008 Creep resisting steels, nickel and cobalt alloys
    ISO 9445-1:2009 Continuously cold-rolled stainless steel Tolerances on dimensions and form Part 1: Narrow strip and cut lengths
    ISO 377:2017 Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
    ISO 14284:1996 Steel and iron — Sampling and preparation of samples for the determination of chemical composition
    EN 10088-1:2014 Stainless steels - Part 1: List of stainless steels
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective